Jump to content
 
  • entries
    109
  • comments
    1,198
  • views
    190,100

coombe junction - moorswater - episode V - the cladding strikes back...


bcnPete

1,951 views

Update

 

Good evening - As mentioned in the last update, work has been progressing on the cladding for the dries building. The roof and walls have had their basic covering using the method of preparing each elevation on a card backing sheet (so as to work on the flat) and then each applied to the building. The conveyor has also been clad and I have now applied trims to the corners to replicate the corner cladding capping pieces as well as disguise the thickness of the evergreen sheet.

 

This evening, I have formed the rooftop vent and also the large sliding doors, which I have left slightly open to hopefully make it a little more interesting even though I am not planning to do the interior decs of the dries building.

 

The slight yellow staining is from my almost finished bottle of MEK and I now need to give it a wash of grey car primer to see how it fairs. I would like to press on with the cladding for the other building before I begin any trial painting of weathering of this one.

 

I attach a few pics - sorry about the quality - perhaps should have waited for natural light tomorrow instead of relying on camera flash :blink:

 

blogentry-3290-0-55380600-1295910588_thumb.jpg

Plan shot showing conveyor and roof vent...

blogentry-3290-0-71749100-1295910600_thumb.jpg

Overall scope of building captured...

blogentry-3290-0-51946900-1295910610_thumb.jpg

From the end which appears to be the most photographed on the prototype...

blogentry-3290-0-77234400-1295910623_thumb.jpg

Sliding doors have been modelled slightly open...

  • Like 1

18 Comments


Recommended Comments

Looking good. I'm planning a small project for the summer once university is finished and hope to achieve industrial buildings with the same look and feel.

 

I'm sure it will look brilliant once it's painted and weathered.

 

Cheers

 

Martin

Link to comment
  • RMweb Gold

Hmmm, I'm wondering if there is a better way to represent the cladding. Can I suggest....

 

Only joking :D . This looks fantastic. After all your troubles with this (to which some of us generously contributed!) it has come out just right, I think. Superb work Pete!

Link to comment

Excellent, I guess the weathering effects depend enrtirely on the texture of the building below, so it will all be well worth the effort!

 

Good compromise on the open door, open it any further and you would have to model the interior!

Link to comment
  • RMweb Premium

Looks like you have found some time to reengage with modelling then. That looks to be turning into a large building. The louvers look good.

Link to comment
  • RMweb Gold

Excellent work Pete and worth the perserverence. B)

 

Instantly captures the prototype and there's no doubting what it's based on. Weathering will certainly bring out the detail too. ;)

 

Once you've finished this I guess it will be the trees next-just a few!:blink:

 

Now we need a shot of a FL 66 shunting some PCA's.:D

 

Looking forwards to the next instalment.

 

Cheers,

 

Mark

Link to comment
  • RMweb Gold

Thank you all for your kind comments.

 

Mikkel - Actually, this one is a mock up :P

 

It is true that many people contributed and this forum is excellent for that - Many thanks all, for all those helpful encouraging comments.

 

It was becoming a bit of a soap opera though, so once I found the right direction, I thought I would just get on with it...rather than share my pain...that said, I do think it is important to document that not everything goes quite as we want it to...all part of the learning process etc...

 

Thanks for staying with me on this one...Episode VI is in preperation ;)

  • Like 2
Link to comment

Verrry nice - and looking at the unclad version proves that nakedness is not neccessarily attractive :D !

 

Regs

 

Ian

Link to comment

Episode VI.... Return of the Cladder ! :lol:

 

Looking good pete... as has been said above, all the efforst here will really pay off once some paint and weathering is applied.

Link to comment
  • RMweb Gold

Ian and Jon,

 

Thanks also for your comments - I am not even sure in which order I work anymore...blog entry after I make the model or model something to suit the blog entry title ;)

 

Short of drain pipes and other bits and pieces I feel its time to get on with the other building now...they are both removable so are easier to work on and I would like to get this board up to the same level as the others so I can start to plan the next level of detail...oh and moorswater viaduct needs attention too...

Link to comment

Episode VI - The Return of the Sith....

 

I had to come out of lurking for this one Pete - well done. It looks very, very good and I am sure the feeling of satisfaction is worth all the time and frustration spent in getting it right.

 

Cheers

Kevin

Link to comment
  • RMweb Gold

Thanks a lot Kevin.

 

I know we are shadowing each other courtesy of the 2FS homepage link but for you to scribe again on here after a long spell away makes me v.happy :D

 

I was hoping you would eventually be drawn to my blog titles...the force is strong...don't try to resist ;)

Link to comment
Guest jim s-w

Posted

What the hell is that? :blink:

 

Seriously, looks well smart, good stuff.

 

Cheers

 

Jim

Link to comment
  • RMweb Gold

Hi Jim,

 

Sorry...only just notice your comment...

 

Many thanks - assume you are referring to the building and not the tittle-tattle banter between other RMWebbers :lol:

 

The building represents the former clay dries shed at Moorswater, now used by Blue Circle for cement. Am modelling it as it was circa 1980 so it will look pretty white and dusty when its done.

 

There is a picture of it here taken last year (thanks Mark 46444) and I bought the scriber you recommended but have decided to try and represent the verticals in the painting and weathering process.

 

Next up is the stone building adjacent which should create a nice contrast with this one.

 

Pete

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...