At the Dawn of Time - Chapter the First
Primitive large scale steam locos
In which the Author discovereth a Cardboard Box in the Study which recalleth his Childhood; and subsequently journeys into the Western-most Parts of Great-Britain.....
A few years ago I saw a reissue of the Airfix kit for Trevithick's locomotive in a shop. I had one of these as a child, when I was too young to have any real understanding of how to build it: I recall some attempt was made at it, though it certainly never got as far as any paint, and one or two cogs and bits survive somewhere in the depths of a scrapbox.
It has always lingered in my memory as one of the most interesting Airfix kits, both for the subject and for the fact that this one was supposed to work. In the 1970s there was supposed to be a motorising kit available, though I never had it, or knew of anywhere you could get it. Occasional sightings of a residual part would prompt the rueful reflection that it would be interesting to attempt the kit now - when I actually know what I'm doing and might make something of it.
So when I saw one I bought it, and brought the thing home - and it's been sitting in a pile of magazines on top of Tramlink
ever since. I seem to have bought it from Modelzone in High Holborn, it's that long ago.
The kit seems still to be available in places https://www.steamrep...-Steam-Loco.asp - I know nothing of these people except that they come up on a Google search and seem to specialise in Mamod live steam.
I was meaning to dig out the Judith Edge Vanguard Steelman kit this weekend . But there was the Airfix kit, and it doesn't need a soldering iron, and I don't have to worry about whether it will run... Also Ally Pally is coming up and there's usually someone there who sells display cases, into which I can put the finished model.
Essentially the kit is built round the boiler
It's a very long time since I built an Airfix kit , other than a wagon kit, and impressions are pretty favourable.
It takes a little getting used to the idea that every part is numbered on the sprue and you assemble by part order. This isn't what you expect in a model railway kit. The pictorial instructions are clear, and once you recognise the code, quite detailed. I've only found one place where the instructions weren't clear exactly where a piece went in, and one place where it isn't entirely clear exactly how it will all fit together.
The fit of the parts is excellent - quite a bit better than I'm used to. In two places - the boiler and the chimney - two halves leave a seam through slight misalignment, and I've had to use filler and file/emery board to get a totally smooth finish. The seam at the top of the boiler is visible in the photo. Otherwise it's all startlingly good - and this is a forty year old kit. There's minimal flash on the parts. As a result of all this, I'm finding I true up and finish pieces to a fairly high standard
There are prototype issues.
Wikipedia is not a reliable source, but it is a convenient one: https://en.wikipedia...hard_Trevithick
In summary, accepted wisdom is that Trevithick's 1802 engine for the Coalbrookdale plateway was 3' gauge, and the furnace door and chimney were at the same end as the cylinder and the reciprocating machinery. It is generally assumed there would have been a small wooden tender pushed in front of the loco.
Firing under the piston, slide bar and connecting rod would seem fairly hazardous, and there seems general agreement -I'm not familiar enough with the scholarship to say upon what basis - that Trevithick reversed the arrangement for the 1804 engine, with the furnace door and chimney at the opposite end from the reciprocating machinery.
What Airfix have modelled is this: https://en.wikipedia...okdale_loco.jpg , but to 5' gauge. As a modern image modeller I'm unfamiliar with the detailed provenance and exact sources of this drawing
A further point is the boiler cladding - or lack thereof. Airfix - and modern drawings - assume an unclad iron boiler , probably painted black.
However the only contemporary colour image of a Trevithick loco seems to be Thomas Rowlandson's watercolour of Catch Me Who Can at Euston in 1808. The best version I can find is here:
And to my eye that clearly depicts a brown /teak boiler , with horizontal lines and boiler bands . In fact it is plainly varnished wooden boiler cladding, as seen on the restored Locomotion No1 and Wylam Dilly, and on pictures of Planet, Murray's Middleton locos , and other early engines.
But Trevithick's tickets for the show just show a plain black boiler : https://www.gracesgu...atch_Me_Who_Can
That , I suspect is the engineer's view - the boiler cladding is a detail to him.
I can't see why boiler cladding would have been newly invented in 1808 - surely the purpose was to lag the boiler and improve thermal efficiency?
So my money is on both the 1802 and 1804 locos having had varnished wooden boiler cladding as well