mozzers 4mm workbench

Thats's some wagon kit, are the brake levers the right way round for the way the brake shoes are set up?

 

John.

i built it as per the kit but now i have finished it & looking yes the brakes or lever is the wrong way

looking on the finney web site link below the kit in the 1st & 2nd photo is built the same as i have

http://website.lineone.net/~cbwesson/4mm%20LSWR%20Van%20photos%20page%20%202.htm

i built it as per the kit but now i have finished it & looking yes the brakes or lever is the wrong waylooking on the finney web site link below the kit in the 1st & 2nd photo is built the same as i havehttp://website.lineone.net/~cbwesson/4mm%20LSWR%20Van%20photos%20page%20%202.htm

I'll have to mention that one to Gerry, oops .

 

Did this take a decent amount extra compared to the average wagon kit in the end?

I'll have to mention that one to Gerry, oops . Did this take a decent amount extra compared to the average wagon kit in the end?

the kit only tuck time in finding the parts on the etch there were No fiddeling to get things to fit so that saved time

 

Mr Finney has got back to me about the brakes

 

quort

Well spotted, you are quite correct. Please accept my sincere apologies.

The error has occurred when I have drawn Fig.5, and also Fig. 6 which is also wrong, by editing Fig.4.

I should have reversed the brake pull rods.

Lovely models