Jump to content
 
  • entries
    34
  • comments
    101
  • views
    18,543

invercloy

490 views

Some of you will know that I've been contemplating what to do for my next layout for some considerable time now. I was thinking of doing a freelance line set in the West Highlands of Scotland, loosely located 'somewhere in the Lochaber region', however whilst coming up with these plans I came across a few references to a proposed line on the Isle of Skye. A little more digging revealed that there was a survey conducted and that the plans were held in the National Archives at Kew, so today ChrisM and I took a trip to have a look at them and see what could be uncovered. The intention was to identify sections of the plans that could make potential layouts.

 

All images below are reproduced with permission.

 

We weren't anticipating finding much, but when collecting the first lot of records this is what we were presented with:

 

4958272730_4075ef45d3.jpg

 

When unfurled this revealed a wealth of plans and long sections of the line including details of bridges, viaducts, and tunnels.

 

4957689477_17f0fe265d.jpg

 

You'll have to excuse the weights on the end of the sheets in some shots, it was a constant battle to stop the sheets curling back up again! It all looked like it had'nt seen the light of day for some considerable time.

 

Here's an overview map of the whole system drawn onto an OS map sheet. Railway 1 runs from Isle Ornsay to Uig (52 miles in total), whilst Railway 2 branches off Railway 1 approximately 3 miles North of Portree and runs a further 24 miles to Dunvegan.

 

4958316268_cf8d6f783e.jpg

 

I've chosen to model Isle Ornsay station as it closely fits the plan for the freelance layout I drew up a while ago, conveniently ChrisM also found a perfect site for a layout for him to build too, but I'll let him tell that side of things when he's ready.

 

The sheet that shows the section of line I'm going to model is shown below:

 

4957701501_c52cffcf7a.jpg

 

More specifically the area immediately around Isle Ornsay station and pier:

 

4958298780_4c1c41e34a.jpg

 

4958303746_7d4abf9d05.jpg

 

As can be seen from the long section, the line was planned to pass through a headland in an 80 yard long tunnel - an ideal break for a fiddle yard! :)

 

Below is a general description of Railway 1 for it's entire length.

 

4957718603_1584c42eaf.jpg

 

Notice to build the line under an order from the 1896 Light Railways Act in the form of an advert placed in the Northern Weekly on Thursday the 21st April 1898.

 

4958309294_b987943a27.jpg

 

The line was proposed by a group of people from the London area. The directors are listed as being a Mr. Andrew M. Barr of Eltham, Harold E. Lewin also of Eltham, Charles Kemble (unreadable location), A. Hambury Tracey of Queensgate, W.M. Godward of Enfield, J.W. Hume Williams of Gloster Place, and T. Beaumont Hesseltine of Bond Street.

 

Some of the above were part of a well known railway manufacturer who's head office address matches that of the Hebridean Light Railway Co.

 

4958314036_2a6e102e83.jpg

 

Dick Kerr feature on a lot of the paperwork and are listed as the promoter and official contractor for the line.

 

I've found several references to this proposal in different books, some mentioned the involvement of the North British Railway, the records don't show this. In one document it is stated that the line wasn't built due to lack of funds and the plan was abandoned. The company correspondence does make reference to them not wanting to immediately dissolve the company as they were keen to try and restart it in the future.

 

To make the model I have made one assumption:

 

When the costs for the line came in at more than expected (£598,977 9s 9d) the HLR approached the NBR to see if they would be interested in a joint project. The NBR agreed and part funded the line as well as agreeing to provide stock, and operate it. The provision of a government grant which the NBR aided the line in obtaining, was a great help towards some of the construction fees.

 

This would have meant that the line was more likely to get built, and to a reasonable standard with some interesting potential for stock.

 

The Highland Railway were approached to build a line on Skye and refused to do so on two occasions, so the NBR was the logical choice for this, especially as they were working on the Mallaig extension to the West Highland Line at the time this scheme was being proposed. Ferries could then have been run from Isle Ornsay to Mallaig to provide a connecting service.

 

The layout will be approximately a 9'x9' L shape, i'll be firming up the trackplan soon after i've made alterations to it to reflect the change in location. Things that will change are mainly the location, type and orientation of buildings as well as a minor re-site of the turntable and the addition of a tunnel mouth as the exit to the fiddle yard.

 

I wil be using some of the details from the National Archives (plus a little imagination) to write a history to accompany the layout.

 

The plans also showed lines proposed across the conjoined islands of Lewis and Harris, namely Railways 3 and 4. I will post some more details of this at some point if people are interested.

 

I've not modelled a real life location before, but the opportunity to do so is something that i'm looking forward to, although the proposed line will allow me to model the area immediately around the station as it could have developed had the line been built.

8 Comments


Recommended Comments

Thanks chaps! :) I'm intending to model it in 1913 so it will be fairly early after completion of the line (estimated at 1903/4). All stock will be in NBR livery - nothing like a challenge!!

 

I've got some more archive material that i'll show when the time is right.

Link to comment

Having said that I had found no reference to the NBR in the records at Kew I uncovered this today:

 

4961009294_924e19b170.jpg

 

I think that the NBR being allowed to 'work' and 'use' the line fits in with the concept I had anyway, as well as the opportunities that the statement about rolling stock opens up.

Link to comment

I thought I recognised TNA Map Room carpet :)

 

What an interesting set of documents. I'm suitably jealous: whenever I'm there playing with medieval parchment for work I always see people poring over maps (and struggling to photograph them) and wonder what they're looking for. It seems you're one of the few who actually find the precise thing they're after...

 

Adam

Link to comment

Hi

Fascinating, Skye is my favorite place on earth, and i am of for another visit on Saturday. I never knew of the existence of the plan, until now..

Pardon my ignorance, what was the proposed gauge.

Good look with this project

Gary

Link to comment

Adam,

 

I have to be honest, at times I found my visit to TNA rather confusing, it was my first time there and it wasn't immensely clear how you go about certain aspects of getting records ordered. Anyway, I got there in the end and was pleasantly surprised by the results! biggrin.gif

 

Gary, Skye is also my favourite place on earth, hence the fascination with the plan as soon as I heard about it. The planned gauge was 3'6", however i'm going to be modelling it at 2'6" gauge. This should have lowered the costs quite considerably over a line of that length, an important decision as finances (or the lack of) seems to have been the main reason the scheme wasn't taken forward. It will enable me to model it in 4mm scale on 9mm gauge track (2'3" i know, but it's close enough for me) AKA 009.

 

Markus, I thought you'd find it interesting! wink.gif I'll be posting details of other parts of the plans in due course as I progress through the layout.

 

Thanks all for your interest.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...