Another new project, but one that will take a little while to complete: I have an unpainted Bratchell Models kit for a class 455/9 unit, which will eventually be in South West Trains red inner suburban livery.

The unpainted shells are very dark and my lighting was poor, so these first two shots are only just sufficient to show the initial construction. The clear plastic driving ends will need a little modification to the lights to match the later, refurbished condition, and are not glued in at this stage. They will also be easier to mask off for painting while not installed.

The instructions advise to remove all of the moulded-on door gutters and add new continuous gutters from microstrip. A quick look at some photos online of 455/9 units proved this correct and also showed at what height the new gutters should be mounted - I found that the height suggested in the instructions looked too low, so mounted mine at what looked correct to me, based on the photos of the real things. The ends of the gutter strips at the driving cab ends need to be cut back slightly, but I thought it better, and easier to correct, to have them too long rather than too short.

The MSO (Motor Second Open) coach has already been test fitted to the Replica Railways chassis that will power the whole unit. This had to have the continuous footstep moulding cut off, and a minimal amount filed off the width, then slotted securely straight into the assembled body shell.

Bratchell Class 455-9 Under Construction - 1 cropped by Jeffrey Lynn, on Flickr

Bratchell Class 455-9 Under Construction - 3 cropped by Jeffrey Lynn, on Flickr

Before I paint anything, there are also roof vents to make and fit. Four per coach, except for the MSO, which only has two. These were unique to the 455/9 construction.