royaloak Posted November 6, 2017 Share Posted November 6, 2017 I've just spoken to Paul on the phone and he's 'back in the land of the living' to quote him directly. Thank you for the update, all power to him for a fast and full recovery. 1 Link to post Share on other sites More sharing options...
apt-e Posted November 10, 2017 Share Posted November 10, 2017 (edited) Hello All, Thanks for all the kind words regarding my health. I am now 95% fit, and hope that it stays that way, fingers crossed. I see you have all been looking for a parts list for the POP model, so here is the reference version I created. Model : PoP 1 Base parts Thin under base x2 Floor PC3/4 part 1 x2 Floor PC3 base part 2 x1 Floor PC4 base part 2 x1 PC 3 Bulkhead 1 x1 Bulkhead 2/5 x2 Bulkhead 3 x1 Bulkhead 4 x1 Bulkhead 6 x1 VIP Bulkhead 1 x1 VIP Bulkhead 2 x1 VIP Inner Support 1 x1 Bulkhead 8 x1 Bulkhead 9 x1 VIP cabin door x1 VIP seats x2 PC 4 Bulkhead 1 x1 Bulkhead 2/5 x2 Bulkhead 3 x1 Bulkhead 4 x1 Bulkhead 6 x1 Bulkhead 7 x1 Bulkhead 8 x1 Bulkhead 9 x1 Framework for PC3 and PC4 Section A 5 parts x2 Section B 5 parts x2 Section C 5 parts x2 Section D 5 parts x2 Section E 5 parts x2 Other parts for PC3 and PC4. Cabin window pack x2 Large cabin panel pack x2 Large cabin doors x4 Drawbar gear pack x2 Under framework pack x2 Plastic sheet for windows x1 Articulated bogie pin x2 Non-articulated bogie pin x2 Ballast pack +supports (3 high) x2 Ballast pack +supports (4 high) x8 Brake pipe and connections pack x2 Bogie Packs Articulated E1/t x1 Articulated steering beam 2x Wheelsets Chassis frame Left bogie side Right bogie side 2x air spring covers Non-articulated E1/t x2 Non-articulated steering beam 2x Wheelsets Chassis frame Left bogie side Right bogie side 2x air spring covers If I can be of any help, please message me. Regards Paul Edited November 13, 2017 by apt-e 2 Link to post Share on other sites More sharing options...
Pete the Elaner Posted November 10, 2017 Share Posted November 10, 2017 Nice to see you back. 1 Link to post Share on other sites More sharing options...
apt-e Posted November 10, 2017 Share Posted November 10, 2017 Nice to see you back. Thanks Pete, nice to be back.. Link to post Share on other sites More sharing options...
DRM Posted November 10, 2017 Share Posted November 10, 2017 Question getalmen, who is trying to put Paul's PoP into production ? I've got confused.!!! Paul great to hear you on the mend my friend. All the best for a great recovery. 1 Link to post Share on other sites More sharing options...
LongRail Posted November 11, 2017 Share Posted November 11, 2017 Paul, glad you recovering and thanks for the parts list 1 Link to post Share on other sites More sharing options...
apt-e Posted November 13, 2017 Share Posted November 13, 2017 Hi All, Thanks for the kind messages. Ive started work on the N gauge version again, so will keep you updated as to progress. Going to take it easy and not rush, so stick with me. Regards Paul 2 Link to post Share on other sites More sharing options...
apt-e Posted November 13, 2017 Share Posted November 13, 2017 Just to remind all, the instructions for the POP1 model can be downloaded from here. http://www.apt-e.org/leadleykits/pop1.pdf Link to post Share on other sites More sharing options...
Mr_Tilt Posted November 13, 2017 Share Posted November 13, 2017 Just to remind all, the instructions for the POP1 model can be downloaded from here. http://www.apt-e.org/leadleykits/pop1.pdf Aggghhhh, I'd forgotten they were there Paul. Stupid of me, it would have helped others on a lot earlier if I had. They're LOADS better than Airfix instructions, even their modern ones. Link to post Share on other sites More sharing options...
Andy1963 Posted December 21, 2017 Share Posted December 21, 2017 Not sure there is a need, I aim to start batch printing in next few days. Is there an update on progress / price for this kit? Link to post Share on other sites More sharing options...
apt-e Posted January 17, 2018 Share Posted January 17, 2018 Hi Paul I have just stumbled across this thread. I had no idea you had been so poorly and am pleased to learn you are almost back to full health. Unfortunately none of the links you gave me/posted here seem to work for me. Do you intend to resume production of the POP1 at anytime in the future? I was #31 of your production list (12 months ago). Should you not be able to continue, I shall register my continuing interest with modelpara who seems ready to take the batton forward. Merry Christmas to all and hope you all have a super festive period. Best wishes dmh Hi, Sadly not for the moment as I just do not have the time, but I am working on an N gauge version, plus 00 POP 2 and HSFV1. I have also done some pre-design work on making APT-P coaches and bogies. Regards Paul 1 Link to post Share on other sites More sharing options...
apt-e Posted January 17, 2018 Share Posted January 17, 2018 Hi All, Has anyone got any more photos of your POPs under construction / and or printing of them, would love to see what you have done with them. Regards Paul Link to post Share on other sites More sharing options...
RMweb Premium amwells Posted January 17, 2018 RMweb Premium Share Posted January 17, 2018 And also, if anyone can print me a set I’d be truly grateful (and happy to cough up the money!). Link to post Share on other sites More sharing options...
86902 Posted January 18, 2018 Share Posted January 18, 2018 Here’s mine Paul, built minus the roof sections and weights so I can get the airbrush in. Cheers Bob 8 Link to post Share on other sites More sharing options...
RMweb Premium ColinK Posted January 18, 2018 RMweb Premium Share Posted January 18, 2018 And also, if anyone can print me a set I’d be truly grateful (and happy to cough up the money!). Me too. Link to post Share on other sites More sharing options...
doodaa Posted January 18, 2018 Share Posted January 18, 2018 Me too. Me too Link to post Share on other sites More sharing options...
Andy1963 Posted January 18, 2018 Share Posted January 18, 2018 And also, if anyone can print me a set I’d be truly grateful (and happy to cough up the money!). Yes, I would be happy to buy a set too Link to post Share on other sites More sharing options...
apt-e Posted February 12, 2018 Share Posted February 12, 2018 HI all, Could ticket number 6 and 7 drop me a line, if still interested in a full POP train kit. Regards Paul 1 Link to post Share on other sites More sharing options...
jeff mcghie Posted February 12, 2018 Share Posted February 12, 2018 Hi All, Has anyone got any more photos of your POPs under construction / and or printing of them, would love to see what you have done with them. Regards Paul Am hoping to be demoing building a set on the Scottish Modellers/demu stand at Glasgow on the Saturday. Got PC3 parts printed and half way through PC4 at the moment. Printed on an Aldi printer so a bit of tidying up to do on the parts first. Jeff. 1 Link to post Share on other sites More sharing options...
RMweb Premium amwells Posted February 12, 2018 RMweb Premium Share Posted February 12, 2018 HI all, Could ticket number 6 and 7 drop me a line, if still interested in a full POP train kit. Regards Paul Number 11 for me! Link to post Share on other sites More sharing options...
John ks Posted February 12, 2018 Share Posted February 12, 2018 Paul If no one with tickets 6 to 25 wants their kit then put me down for one. John Ticket 26 1 Link to post Share on other sites More sharing options...
apt-e Posted February 13, 2018 Share Posted February 13, 2018 Here’s mine Paul, built minus the roof sections and weights so I can get the airbrush in. Cheers Bob 6EFBF3FE-28B3-476F-91C4-C042D88A45AF.jpeg Looking good Bob, cannot wait to see the finished item, keep up the good work. Paul Link to post Share on other sites More sharing options...
apt-e Posted February 13, 2018 Share Posted February 13, 2018 (edited) Am hoping to be demoing building a set on the Scottish Modellers/demu stand at Glasgow on the Saturday. Got PC3 parts printed and half way through PC4 at the moment. Printed on an Aldi printer so a bit of tidying up to do on the parts first. Jeff. Og WOW Jeff, no pressure then. Hope it all goes well. Would love to see your finished version, and/or photos of the build. Best wishes Paul; Edited February 13, 2018 by apt-e Link to post Share on other sites More sharing options...
jeff mcghie Posted February 13, 2018 Share Posted February 13, 2018 (edited) Og WOW Jeff, no pressure then. Hope it all goes well. Would love to see your finished version, and/or photos of the build. Best wishes Paul; Will do. Quick question. There is a part in the pack called 'corrected parts' but can't see from the instruction which parts it is supposed to replace. It looks like parts for the outer top section framework maybe ? Any Ideas?? Thanks Jeff. Edited February 13, 2018 by jeff mcghie Link to post Share on other sites More sharing options...
LongRail Posted February 13, 2018 Share Posted February 13, 2018 HI all, Could ticket number 6 and 7 drop me a line, if still interested in a full POP train kit. Regards Paul Sounds interesting I am number 9 so hope this is a sign of things improving with you 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now