sem34090 Posted January 12, 2018 Share Posted January 12, 2018 I feel I've posted a bit much tonight... Oh well, on last thread - Promise! I am intending to model a private steam workshop in 7mm scale, featuring Standard Gauge, 3ft Gauge 2ft 3'' Gauge, 18'' Gauge and 5'' Gauge all on one layout. Now, most of these are covered, but the 5'' was causing problems. By my reckoning, T works out at roughly 5'' gauge in 7mm scale, and for the purposes of the workshop I would want the track to be raised in the style of the many portable 5'' gauge railways one sees at community events and model railway shows, and preferably working. I do not intend to buy a trainset, and I may not even be buying any track. The current plan is to use one motorised chassis, fitted with a modified coach body from shapeways to act as a riding wagon for any (non-powered) loco that I would put in front of it. For such a small set up, would two motor units actually be required. As I say, this will only be a small part of a layout, but any opinions would be much appreciated! All the best, sem34090 Link to post Share on other sites More sharing options...
hartleymartin Posted January 13, 2018 Share Posted January 13, 2018 I suppose it is possible. I do know that in 7mm scale, N gauge was used to variously represent miniature railways anything from 12" to 18" gauge. In certain varieties of G scale, N gauge was used to represent 7.25" gauge miniature railways (I think 1:20.3 scale) Link to post Share on other sites More sharing options...
MGR Hooper! Posted January 13, 2018 Share Posted January 13, 2018 I feel I've posted a bit much tonight... Oh well, on last thread - Promise! I am intending to model a private steam workshop in 7mm scale, featuring Standard Gauge, 3ft Gauge 2ft 3'' Gauge, 18'' Gauge and 5'' Gauge all on one layout. Now, most of these are covered, but the 5'' was causing problems. By my reckoning, T works out at roughly 5'' gauge in 7mm scale, and for the purposes of the workshop I would want the track to be raised in the style of the many portable 5'' gauge railways one sees at community events and model railway shows, and preferably working. I do not intend to buy a trainset, and I may not even be buying any track. The current plan is to use one motorised chassis, fitted with a modified coach body from shapeways to act as a riding wagon for any (non-powered) loco that I would put in front of it. For such a small set up, would two motor units actually be required. As I say, this will only be a small part of a layout, but any opinions would be much appreciated! All the best, sem34090 Hello, Only one unit would be required to power that. Link to post Share on other sites More sharing options...
hartleymartin Posted January 14, 2018 Share Posted January 14, 2018 If you look at tgauge.com there are a good number of commercial items which you may find useful - including some kit bashing stuff such as variable length chassis. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now