RSS Fetcher Posted June 18, 2018 Share Posted June 18, 2018 After a brief interlude (okay a month), due to GWR Loco's - I finally resumed work on the Bf 109... Before I masked up the underside, I painted the wheel wells and radiators. I masked up the underside and parts of the cockpit canopy - which had I pre-painted prior to fitting and masking up (next three photo's show that sequence) Once the topside of the fuselage had been given a few coats of BS Dark Earth and allowed to dry. I used the blu-tak & masking tape (or MORPH) method to layout the camouflage. Once painted the masking was removed and too my surprise it had worked very well, with only a small amount of touching up needed. Touching up done and the guns & exhausts added. Today I busied myself painting and assembling the undercarriage, along with a few more parts. However to my dismay I discovered a short on the sprue and a missing part, so I've got to scratch build a Pitot tube assembly. That's all for now TBG Attached thumbnail(s) View the full article Link to post Share on other sites More sharing options...
Recommended Posts