RMweb Gold PjKing1 Posted July 17, 2018 Author RMweb Gold Share Posted July 17, 2018 All very interesting, will certainly be following this. I am thinking about a small diorama for my few bits, but then we;re moving house soon and the garden needs work.......... Al. Thanks Al, I’ve been needing something as a photo board/micro for ages so thought it was about time I did something about it, but I ha e to say I’m quite excited about it, last night was spent weathering one of two 20’s for a client but I’ve just put pretty met on the second buffer so I’ll try an paint that tonight. I’ll be updating my weathering thread with more of this later to 6 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted July 20, 2018 Author RMweb Gold Share Posted July 20, 2018 Work on the second buffer well underway 2 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted July 30, 2018 Author RMweb Gold Share Posted July 30, 2018 Quite a bit done over the last week, all three buffers are painted and finished apart from a bit of grease on two of them, the Templot has been printed off and the buildings at the blocks end have been measured up etc and the board itself was orderedsnd since arrived. Next thing will be to get the board built add the cork and I’m good to go, not sure how much I’ll get done though in the next few weeks though as I’ve got four locos to finish weathering in time for Telford and start a new job in September so pretty busy 9 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 1, 2018 Author RMweb Gold Share Posted August 1, 2018 Late last night I thought I’d have a quick look of how the board went together, an hour later it was more or less finished apart from some of the extra brassing pieces and the front cover. I have to say I’m very impressed with this off Tim Horn, went together so easily, quickly and the quality is excellent. 4 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted August 1, 2018 RMweb Gold Share Posted August 1, 2018 Next thing will be to get the board built add the cork and I’m good to go, not sure how much I’ll get done though in the next few weeks though as I’ve got four locos to finish weathering in time for Telford and start a new job in September so pretty busy , and moving house (hopefully). Mike. 1 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 1, 2018 Author RMweb Gold Share Posted August 1, 2018 , and moving house (hopefully). Mike. Hopefully mate, I need somewhere to stick all these boards Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 3, 2018 Author RMweb Gold Share Posted August 3, 2018 Cork, Templot and sleepers all down last night, then the first couple of coats of staining this morning. 9 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 4, 2018 Author RMweb Gold Share Posted August 4, 2018 Chairs started to get theaded last night and a bit of mucking about 9 Link to post Share on other sites More sharing options...
D6775 Posted August 4, 2018 Share Posted August 4, 2018 Thats starting too look really good Paul. What size board is it? I keep thinking about ordering some of Tim's boards. Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 5, 2018 Author RMweb Gold Share Posted August 5, 2018 Thats starting too look really good Paul. What size board is it? I keep thinking about ordering some of Tim's boards. Thanks mate it’s 4’x18” but it’s bigger than it seems, how they recommend though Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 5, 2018 Author RMweb Gold Share Posted August 5, 2018 Busy day yesterday, managed to finished staining the sleepers and get three 60’ rail sections installed so pretty pleased 10 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 17, 2018 Author RMweb Gold Share Posted August 17, 2018 More work over the last week, all the track is now down and ready for wiring and all the brickwork for the platforms is now carved. Once wired I’ll paint and weather the brickwork then I can then get them fitted, then I can paint the rails and start ballasting. A few pics of thisxweks work including a mock up of a small section of platform to see how it looks. 10 Link to post Share on other sites More sharing options...
Andrew P Posted August 17, 2018 Share Posted August 17, 2018 It's coming on well Paul, some lovely Trackwork mate. Link to post Share on other sites More sharing options...
daifly Posted August 17, 2018 Share Posted August 17, 2018 I recognise that it's just a mock up, but the platform top looks a little low. Trackwork with 'proper' chairs does look so much better than the ready-made lengths though. Dave 1 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 18, 2018 Author RMweb Gold Share Posted August 18, 2018 It's coming on well Paul, some lovely Trackwork mate. Thanks Andy Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 18, 2018 Author RMweb Gold Share Posted August 18, 2018 (edited) I recognise that it's just a mock up, but the platform top looks a little low. Trackwork with 'proper' chairs does look so much better than the ready-made lengths though. Dave Cheers Dave it’s the standard 21mm (3’) above rail height, as for the chairs you can’t beat Exactoscale. Edited August 18, 2018 by PjKing1 Link to post Share on other sites More sharing options...
D6775 Posted August 19, 2018 Share Posted August 19, 2018 Paul, what are you using to stain the sleepers? I get the feeling Telford is going to cost me a pretty penny!! 1 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 19, 2018 Author RMweb Gold Share Posted August 19, 2018 Paul, what are you using to stain the sleepers? I get the feeling Telford is going to cost me a pretty penny!! Evening mate I use Wilkos Jacobean dark oak it’s abot £7 I think, I’m going to Telford on the Saturday so if you want to say hello let me know I’ve dropping a couple of loco off and picking a 20, Falcon and a blue Peak up can’t wait Cheers Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 20, 2018 Author RMweb Gold Share Posted August 20, 2018 An unusual visitor at Lime Street and some work at the buffer end over the weekend 6 Link to post Share on other sites More sharing options...
D6775 Posted August 20, 2018 Share Posted August 20, 2018 Evening mate I use Wilkos Jacobean dark oak it’s abot £7 I think, I’m going to Telford on the Saturday so if you want to say hello let me know I’ve dropping a couple of loco off and picking a 20, Falcon and a blue Peak up can’t wait Cheers Hopefully I'll be there Saturday, might have the father-in-law with me! Might even have my 26 done as my transfers should be here this week, depends how quick my mate can turn the weathering round. 1 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 21, 2018 Author RMweb Gold Share Posted August 21, 2018 Hopefully I'll be there Saturday, might have the father-in-law with me! Might even have my 26 done as my transfers should be here this week, depends how quick my mate can turn the weathering round. Great stuff pm me if your going mate we an I’ll say hello, I’ve got two 20’s a Falcon an a brake tender to drop off that I’m weathering at the moment. Cheers Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted September 1, 2018 Author RMweb Gold Share Posted September 1, 2018 Falcon and two 20’s were delivered to Telford today and couple of new recruits for Lime Street 6 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted October 6, 2018 Author RMweb Gold Share Posted October 6, 2018 At last an update, works be pretty slow on this projector unfortunately due to the new job, but I’ve managed to crack on with the platforms a little each night, I’ll have to order more foamex though to finish the platform surfaces. Anyway here’s a few pics of the progress so far and a pic of my new office (taken with permission ) 9 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted August 14, 2021 Author RMweb Gold Share Posted August 14, 2021 Hi a bit like my main layout thread I’ve let this one lapse a bit, although over the last few months I’ve not done much modelling. I have however finished platforms 1 & 2, I’ve also reduced the height of the backscene to although I’ve kit sure how I will fit the ohle. 11 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now