Name that connector?

[Paul80]

Hi all

 

Hope this is in the correct section

 

Anyone know what the correct name is for the type of plug that Gaugemaster use on their Prodigy controllers, the green 4 way one.

 

Thanks

[Widnes Model Centre]

Hi all

 

Hope this is in the correct section

 

Anyone know what the correct name is for the type of plug that Gaugemaster use on their Prodigy controllers, the green 4 way one.

 

Thanks

 

This one?

 

http://www.gaugemaster.com/item_details.asp?code=DCC71&r=1

[Paul80]

Yep, that's the type, do you know what they are called

[Widnes Model Centre]

Yep, that's the type, do you know what they are called

 

Only what it says in the text. Here is a bit more.

 

.http://www.gaugemaster.com/decoder_tester.html

[Widnes Model Centre]

Or this one?

 

http://www.gaugemaster.com/item_details.asp?code=DCC30&style=&strType=&Mcode=Gaugemaster+DCC30

[Harlequin]

It's a "5mm pitch pluggable terminal block".

 

For example, see: https://www.rapidonline.com/camblock-plus-ctbp9200-4-5mm-pitch-female-pluggable-term-block-horiz-4-pole-21-3222

[Paul80]

Thats it Phil

 

Thanks

 

I have quite a few of the plug, but was looking for the other half that it plugs into, now I know what its called I can look for the socket version

 

Paul

[RedgateModels]

I can look for the socket version

 

https://www.rapidonline.com/camdenboss-ctb9300-4a-4-way-12a-pluggable-top-entry-header-closed-5mm-pitch-21-2384

[peterfgf]

Possibly these?

 

https://uk.rs-online.com/web/c/connectors/pcb-connectors/pcb-terminal-blocks/#applied-dimensions=4294965289

 

Peterfgf

[Gordon H]

Suggest you measure the pitch quite accurately before purchasing anything. These connectors come in at least four different pitches, typically Imperial sizes 5.08mm (0.2"), 3.81mm (0.15") and actual metric sizes 3.5mm and 5mm.

Also note that most, if not all of the mating halves (the headers) are intended for PCB mounting.

[dasatcopthorne]

They are on eBay or at DCC Supplies.

 

Dave