mozzer models Posted February 14, 2011 Author Share Posted February 14, 2011 You make these look very tempting! Chivers should pay you a retainer for showing how well their kits can be presented! Thanks got some more done to 4 work wagons there now had sme weathering i still need to do some more to them but heres some pics the train crane car Camp/Tool car short flat car combine car What do you think ?? Link to post Share on other sites More sharing options...
RMweb Gold Oldddudders Posted February 14, 2011 RMweb Gold Share Posted February 14, 2011 I think they all look like they need a repaint - which is exactly what you set out to show, I'm sure. That is real "weathering" rather than showing layers of grime, which may be less likely for such stock, actually. I like the birds on the trestle, too! Link to post Share on other sites More sharing options...
mozzer models Posted March 2, 2011 Author Share Posted March 2, 2011 I like the birds on the trestle, too! The Birds are from Rabble Figures heres http://homepage.ntlw...com/page13.html Today i have been building a A1 Models On30 conversion kit for the Bachmann Ernie 1 loco I still have to fit the roof, rad cap & exhaust pipe then the body work is done then its on with the chassie which i will be adding bufferbeams plus Kadee No5 & beefing up the look of the chassie This will be up for sale once finish so if you would like it Then get in touch as i can then paint it the colour you want Link to post Share on other sites More sharing options...
mozzer models Posted March 3, 2011 Author Share Posted March 3, 2011 Well the Loco is now ready for painting in to primer today & then the top coat tomorrow Maroon at the mo un-less am asked to do it another colour the body is just sat on the chassie so the gap will not be on the finished model heres the pics Link to post Share on other sites More sharing options...
mozzer models Posted March 4, 2011 Author Share Posted March 4, 2011 heres some pics of the finished model ready for sale Link to post Share on other sites More sharing options...
mozzer models Posted March 8, 2011 Author Share Posted March 8, 2011 have sold the loco but need to repaint it into yellow heres some photos of it in yellow Link to post Share on other sites More sharing options...
mozzer models Posted March 9, 2011 Author Share Posted March 9, 2011 heres a pic of the wood rails to hold the logs for my 2-6-0 that i am turming from a coal burner to a log burner Link to post Share on other sites More sharing options...
mozzer models Posted March 15, 2011 Author Share Posted March 15, 2011 SORRY for some of the phots in older post not showing but i hosted them on fotopic.net & its not been working for the last 5 days I ordered a set of stackes & toolboxes from Steam in the Bush in Ozz on the 8th which arived today not bad shipping time heres a pic of them just before i gave them a coat of primmer Link to post Share on other sites More sharing options...
brunswick green Posted March 27, 2011 Share Posted March 27, 2011 Any chance of you posting the earlier pics again, if you haven't lost them for eternity? Many thanks. Rob Link to post Share on other sites More sharing options...
mozzer models Posted March 27, 2011 Author Share Posted March 27, 2011 Any chance of you posting the earlier pics again, if you haven't lost them for eternity? Many thanks. Rob I have replaced some of the Pic i had on Fotopic Plus heres a update on the Bachmann 2-6-0 which i have made into a log burner heres some pics of the rails on the tender painted & heres some of the loco now fitted with a new stack & log load in the tender hows it looking Link to post Share on other sites More sharing options...
mozzer models Posted April 30, 2011 Author Share Posted April 30, 2011 I have picked up a cheap Bachmann Coach on ebay & as i need a railcar i using the coach & a Smallbrook Models Iris loco to build the railcar Today the coach arrived so i have made a start building the Railcar I have shortened the coach & built a fixing so the coach & loco can run I still need to make the drive compartment On30 railcar by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
mozzer models Posted May 2, 2011 Author Share Posted May 2, 2011 well today i got done what i wanted to to yestoday the drive cab is built & a new window cut I have re-placed the smoke stack with the 2nd one i got from 'Steam in the Bush' in Ozz i wll also be putting some toolboxes on the lip at the front of the loco Since i tuck the pics i have built a new balcony replacing the Bachmann one ( i now have 2 spares to replace the bust ones on my 3 repainted ones) As well as that i have fitted a steam dome & all is in primmer 029 by Mozzer models, on Flickr 028 by Mozzer models, on Flickr more to follow Link to post Share on other sites More sharing options...
mozzer models Posted May 3, 2011 Author Share Posted May 3, 2011 And heres an update on the railcar most of the work is now apart from some pipework & controls in the cab then on to weathering 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr 004 by Mozzer models, on Flickr 005 by Mozzer models, on Flickr 003 by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
mozzer models Posted May 7, 2011 Author Share Posted May 7, 2011 The Steam railcar is now on hold till i get some works plates but it will be out next weekend at the Greater Manchester Transport Society Model Railway Exhibition But i am making a start on a Backwoods Miniatures Vertical Boiler 0-4-0 that sits on the Bachmann gas mechanical chassie today i have only got the holes drilled as i had to take the kids to see beauty & the Beast at the LBT in huddersfield i hope to have this finished so it can pull my works train made from Chivers kits Link to post Share on other sites More sharing options...
mozzer models Posted May 8, 2011 Author Share Posted May 8, 2011 With one Eye on the TV watching F1 i have built up the VB loco Its now ready for painting But what colour do i finish it in Link to post Share on other sites More sharing options...
mozzer models Posted May 9, 2011 Author Share Posted May 9, 2011 this Loco is to pull the works train so i have gone for this i still have to finish painting the driver & fireman & i need to cut up some wood for the log fuel Backwoods Miniatures On30 Vertical Boiler 0-4-0 loco body kit on a Bachmann Gas-Mechanism 1 by Mozzer models, on Flickr Backwoods Miniatures On30 Vertical Boiler 0-4-0 loco body kit on a Bachmann Gas-Mechanism 2 by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
mozzer models Posted May 9, 2011 Author Share Posted May 9, 2011 I Now have had both the Railcar & VB on Forks heres are some pics 005 by Mozzer models, on Flickr 004 by Mozzer models, on Flickr 003 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr 001 by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
RMweb Gold Oldddudders Posted May 9, 2011 RMweb Gold Share Posted May 9, 2011 Utterly charming as usual, Brian! The VB is intriguing - any room for a decoder, d'you think? Link to post Share on other sites More sharing options...
mozzer models Posted May 9, 2011 Author Share Posted May 9, 2011 Utterly charming as usual, Brian! The VB is intriguing - any room for a decoder, d'you think? the chassie is the Bachmann Gas Mech & is fitted with one & there is room to fit sound if need be (I have not fitted sound but the boiler is hollow) I hope to get some video of both this weekend to the show in manchester Link to post Share on other sites More sharing options...
mozzer models Posted May 14, 2011 Author Share Posted May 14, 2011 heres some video of the VB Link to post Share on other sites More sharing options...
mozzer models Posted June 22, 2011 Author Share Posted June 22, 2011 Having a look aroud Ebay i found some 25/28mm war game buildings for Old Wild West Buildings for the price i Had to have a look at one of the kit to see if i can use them in my new On30 layout Well the kit arived today the door is 37 mm or 1 7/16 high so just under 6 foot in 1/4 inch scale (On30) which close enough for me I have taken some photos with a woodland secnics Man in front of the building he is 1 1/2 inch high so 6 foot 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr the makers do two sizes of which i have the small one so the larger ones sould be better to scale buildings Full range here http://www.sarissa-precision.co.uk/store/oldwesthr/ & here what with very little work it can look like printed roofing & paint & ink from citadel (the roof & building frontage are lose) 003 by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
alastairq Posted June 26, 2011 Share Posted June 26, 2011 hi...the door height of small and medium options will be the same.....just the depth of the building seems to differ.... I think your choice of figure example is misleading...everybody knows lumberjacks are giants amongst men.... besides, I think he's stood on tiptoe? Link to post Share on other sites More sharing options...
mozzer models Posted June 26, 2011 Author Share Posted June 26, 2011 hi...the door height of small and medium options will be the same.....just the depth of the building seems to differ.... I think your choice of figure example is misleading...everybody knows lumberjacks are giants amongst men.... besides, I think he's stood on tiptoe? The Old West Heroic range is larger than the one in my photos so the doors from that range will be bigger compair this pic on there web site the building on the right is the same as the one i have built http://www.sarissa-precision.co.uk/gallery/photoswip/files/page10-1002-full.html Link to post Share on other sites More sharing options...
mozzer models Posted July 8, 2011 Author Share Posted July 8, 2011 This Morring the Bachmann On30 2-6-0 that i picked up on ebay for £28 inc postage arrived But it came in the Hawthorne Village's Moonlight Express livery so after a quick strip down it was given a coat of halfords gray primer 001 by Mozzer models, on Flickr that was at 11.15 at 2pm i gave the loco a coat of mat Black & i have just put the loco back togetter 003 by Mozzer models, on Flickr & heres a pic of the other one i have ( which has not been repainted) showing the livery it came as 002 by Mozzer models, on Flickr the black loco has been made into a oil burner using a Dapol retank wagon body to form the oil tank & the blue loco has been make into a log burner using a new cast smoke stack from steam in the bush Link to post Share on other sites More sharing options...
mozzer models Posted July 10, 2011 Author Share Posted July 10, 2011 the works plates arrived in the post yestoday so after i painted then i have put the on the loco the plates work made for me by Narrow Planet www.narrowplanet.co.uk 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.