RMweb Gold MikeParkin65 Posted December 11, 2017 RMweb Gold Share Posted December 11, 2017 I have been busy adding sound to 3 AM gauged Hornby Black 5s. All have the Locoman sounds on a Zimo chip, all have different speakers(all fitted in the tenders). Interesting to hear the differences in sound from each loco. If I can get a recording of them I will try and add it here. Next up a Hornby B1 and a DJH Caprotti std 5 for the same customer Baz It is interesting how speaker choice makes such a difference - not better or worse, just different. I was fitting sound to a Duchess yesterday using the Digitrains 'heavy LMS' project. From a variety of Zimo 3D and Youchoose speakers I actually though an iphone 6 speaker gave the best approximation. Whose projects will you use for the B1 and the Standard 5? I was surprised how loud and sharp the bark of the latter was when 73156 was loaned to the Severn Valley a couple of years ago - almost like a Castle and nothing at like a Black 5. Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted December 11, 2017 Author RMweb Premium Share Posted December 11, 2017 (edited) All of the locos are being fitted with the sound chips supplied by the owner.The B1 has a Zimo from Digitrains, the Caprotti is a Loksound from SDW of a Standard 5.The B1 has been supplied with a 23mm round speaker designed to fit in the Hornby tender...getting the chip and stay alive in is interesting.Yet to start on the Caprotti.In EM I prefer to get the speakers as near to the chimney as possible. DJH Duke of Gloucester has a round speaker in the boiler and sounds very good, others have sugar cubes between the frames.And yes the 3 speakers (all in the tenders of the Black 5s do have a big difference in sound production.Baz Edited May 18, 2018 by Barry O Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted May 18, 2018 Author RMweb Premium Share Posted May 18, 2018 Having spent a lot of time away from the UK I have cleared off some more locos and wagons. More news on the locos soon suffice to say one of them is an EMd Bachmann Ivatt 2-6-0 . Repainted, renumbered, sound chipped and weathered... I also had a "rush" job. 5 unfitted EX LMS and 5 fitted ex LMS brake vans to be regauged to EM, new couplings fitted and then weathered. The 4 unfitted are Bachmann ones, 1 is a Parkside kit (built , painted and lettered by me) One of the Bachmann ones was a not in common use one Five Hornby fitted brakes had vac pipes fitted before weathering The owner asked for "generic" weathering as time did not allow for each one to be matched with a suitable photograph of such vehicles in use in the Carlisle area. Delivered to Tony Wright who, very kindly delivered them for use on Carlisle. Baz 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted August 16, 2018 Author RMweb Premium Share Posted August 16, 2018 (edited) It is always nice to do something different. A set of four ICI bogie hopper wagons for Chapel-en-le-Frith arrived from Nicktoix. Not many colour photos of these so from the one "in service" one I have found... underneath inside and two together mix of brown and black inks as a base coat, then some brown "Underframe" mix, black and "off" white powders used to get the limestone on dirt colour scheme and a loco - DJH Std 4MT in BR lined black by Nictoix from a RCTS colour photo. Baz Edited August 16, 2018 by Barry O 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted November 12, 2018 Author RMweb Premium Share Posted November 12, 2018 A few more locos dcc sound fitted and weathered. Lighting not at its best but.. A Hornby Stanier 2-6-4T. Sound fitted (Zimo), speaker under the chimney in the boiler, stay alive capacitors fitted into the bottom of the bunker. and front on.. Baz 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted November 19, 2018 Author RMweb Premium Share Posted November 19, 2018 (edited) Another EM'd loco, Zimo sound chip fitted, speaker fitted, stay alive fitted in tender, extra tender pickups fitted. Renumbered, then weathered to a photo supplied by the customer loco only and tender only Baz edited as it is so good it posted twice! Edited November 19, 2018 by Barry O 2 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted November 30, 2018 Author RMweb Premium Share Posted November 30, 2018 Nice change the last few days. A commission for 3 Bachmann TTAs. Customer supplied e-photos. Collected today and heliked them. and and Baz Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted December 13, 2018 Author RMweb Premium Share Posted December 13, 2018 A number of locos I have weathered or fitted sound to have appeared in the Jan 2019 Railway Modeller in the article on Carlisle by Tony Wright. Lots of other locos and stock wetahered for this layout. Might just get to physically see it one day! A couple of Heljan Co-Bos - regauged by Mike Edge then sound chips fitted (Digitrains), weathered and new pipework fitted These work the "Condor" on the layout. A DJH Clan - built by the late Alistair Rolfe (in EM) weathered by me .. and I think it has a Zimo sound chip fitted. and a Caledonian Jumbo built by Mike Edge (in EM), weathered by me Baz 2 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted December 23, 2018 Author RMweb Premium Share Posted December 23, 2018 A video of some wetahering at Warley NEC show Baz Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted January 16, 2019 Author RMweb Premium Share Posted January 16, 2019 another day...another Long Boiler.. Built from a Judith Edge Kit by Mike Edge (who also painted and lined it) complete with a S4 chassis Dante is presented as a "little bit work stained Baz 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted January 23, 2019 Author RMweb Premium Share Posted January 23, 2019 Customer likes the Kitson long boiler. Great! Baz Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted April 4, 2019 Author RMweb Premium Share Posted April 4, 2019 (edited) After a while away and doing some housework (painting and decorating) I have got back to do some more work. Two Locos to be fitted with sound (a Bachmann Patriot 45543 Home Guard and a Bachmann BR Std 5MT in green 73068).. no pictures but there are 4 others fitted with sound and weathered.. As a taster a Hornby Black 5, re gauged to EM and then fitted with etched chassis overlays (designed and fitted by Mike Edge) Black 5 44765 - speaker fitted into the boiler under the double chimney. Black and White photo of loco supplied for weathering illustration. Tender looks better with real coal.. Baz Edited April 4, 2019 by Barry O 4 Link to post Share on other sites More sharing options...
Leander Posted April 5, 2019 Share Posted April 5, 2019 18 hours ago, Barry O said: Tender looks better with real coal.. Baz The LMS part-welded tender and the double chimney are both Comet Models' products. 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted April 5, 2019 Author RMweb Premium Share Posted April 5, 2019 9 hours ago, Leander said: The LMS part-welded tender and the double chimney are both Comet Models' products. and very nice they are too! Baz Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted April 5, 2019 Author RMweb Premium Share Posted April 5, 2019 Another loco for a customer. This is a Hornby 4MT 4-6-0. It needed renumbering , sound fitting (chip supplied by customer) and weathering. Fitting the chip and stay alive in the tender was OK (no space for the block stay alive so that is in the coal space). Some of the mazak under the chimney was removed to allow a sugar cube to be fitted. Using a photograph provided I then used my standard ink and powder techniques to provide the weathering, then a bit of very thinned white poster paint to add some details. Note the slight marking under the smokebox door. And to complete ..this is the other side of the locomotive Baz 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted April 7, 2019 Author RMweb Premium Share Posted April 7, 2019 and the final weathered/sound fitted etc loco for this current batch A Bachmann BR Std 5MT. Re-gauged to EM by others, new front steps fitted, Zimo 645R fitted with stay alive block in the tender, sugar cube fitted under the chimney. Then weathered to a picture or two provided. Baz 3 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted April 8, 2019 Author RMweb Premium Share Posted April 8, 2019 Happy Customer! 1 1 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted April 8, 2019 RMweb Gold Share Posted April 8, 2019 Baz, have you tried iPhone speakers yet? Although probably not so easy to fit under a kettle's chimney as a sugar cube they are very well priced on Ebay and superb in any where there is a slim space plus they can be cut down without any noticeable loss in sound. Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted April 8, 2019 Author RMweb Premium Share Posted April 8, 2019 I haven't yet but I have some diesels to do which will be an opportunity to try them out. Baz Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted April 21, 2019 Author RMweb Premium Share Posted April 21, 2019 Fitting sound to Bachmann 08s is interesting..this one I did for me some time ago..and I have just fitted another one (again in BR Black) for a customer. Forgot to get a photograph but he wanted it with sound and a gentle waft of "in use" loco weathering. Seems he likes it! baz Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted June 16, 2019 Author RMweb Premium Share Posted June 16, 2019 A few diesels. The owner had fitted DCC chips to them. I have reset some of the CVs on these to sort out acceleration/Deceleration and then a waft of weathering after adding the details at one end on these. First up a Vitrains 37 and a bit of front end detail Hornby Class 50 Heljan Class 58 and the dreaded door stickers! Bachmann/Kernow Sir Daniel Gooch and a close up and finally a Class 108 lightly weathered Baz 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted July 4, 2019 Author RMweb Premium Share Posted July 4, 2019 EM (regauged- Bachmann Ivatt 4MT Mogul (aka a Mucky Duck or Chinese Cracker). Renumbered and shed/smokebox door plate ( supplied by client) added. Pick ups fitted to the tender then a client supplied Zimo sound chip, stay alive and speaker were fitted into the loco at the smokebox end (I don't like steam chuffs coming from a tender). New front steps (comet) supplied by client added. A nice colour photograph from one of the Railways around Bradford was used and.. Side on Three quarter front And the other side and , finally, three quarter rear shot.. A gentle waft of road dirt on the frames and wheels then a bit of "Grease" added to the tender axleboxes. Baz 2 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted October 5, 2019 Author RMweb Premium Share Posted October 5, 2019 (edited) I have built and painted some mineral wagons ready for my demo at Warley. Come along and have a go! Baz Edited October 28, 2019 by Barry O speelung Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted October 28, 2019 Author RMweb Premium Share Posted October 28, 2019 I had a bit of spare time at our show in between operating Chapel en le Frith (Central). One of our Club Members has a Korean Brass Black 5, re-chassied with a Comet chassis by Innocentman. It was a bit too clean so.. luckily I had a decent colour photo of the very same engine. Baz Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted November 26, 2019 Author RMweb Premium Share Posted November 26, 2019 Lots of weathering done by visitors to my demo at Warley. Even managed to get one or tow items for other demonstrators done over the weekend. Unfortunately no photos as yet.. but some should appear soon! baz Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now