Jump to content
 

Dagworth

RMweb Gold
  • Posts

    4,585
  • Joined

About Dagworth

Contact Methods

  • Website URL
    http://www.dagworth.net

Profile Information

  • Location
    The DCC surgery - Cheltenham, England

Recent Profile Visitors

14,559 profile views

Dagworth's Achievements

11.1k

Reputation

  1. As long as the toaster itself can’t talk to people, holograms, robots or cats! Andi
  2. Anything that stops money being siphoned out of the railways into shareholders pockets has to be a good thing. Andi
  3. It’s car park barrier aka ped barrier. It’s designed to guide people not contain them. It is lethal and should NEVER be used in the front of a gig. They are not designed for a pushing load. If they go over the feet are sharp and will kill. There is a case on record where they were used as a gig barrier and someone got excited and jumped up and down on the lower bar which became detached from the rods. Some of the rods became detached at the top however and entered the rib cage of the person jumping. Pit barrier is a significantly better design with a large plate under the feet of the audience so they weigh the thing down, and diagonal bracing behind it to resist pushing forces. It also has a step in the back of it for the pit crew to assist people over it if needed. Each section is firmly bolted to the piece next to it. It will still move in case of surges though. (See video of the Manchester gig crowd surge Andi
  4. Say no to cruelty to dragons! 

    1. Clive Mortimore

      Clive Mortimore

      St Edmund is the real patron saint of England, English King and martyred on English soil. 

       

      Plus the story of the wolf guarding St Edmund's severed 'ead is far more plausible than saving a princess from a huge fire breathing flying lizard which had the dexterity to tie the princess to the tree.   And where did it get the rope, B&Q or Screwfix?

    2. Captain Kernow
  5. 5000 were made but number 4472 is to be ceremonially thrown into the firebox of FS! Andi
  6. A sound engineer friend had a punter at a gig say to him "what happens if I touch that button?" The answer "Your nose bleeds" wasn't what he expected! Andi
  7. If someone leans on my layout then I reserve the right to paint the offending part of that person to match the scenery Andi
  8. I presume you have turned the brightness of the lights down in the decoder settings? This is done by switching them on and off extremely rapidly. If you put them to full brightness they will stop flickering like that but will probably be too bright. The only real solution is to change the resistor values on the light circuits. Andi
  9. The only skinhead 31/4s were 418 (which existed in unrefurb and refurb periods) and 444/450/461 which only existed in refurbed form Andi Edit: forgot one! thanks @Hairy Bear Digital
×
×
  • Create New...