The vinyls to convert a Bachmann class 350/1 into a SouthWest Trains liveried class 450 arrived last week, while I was unable to do anything due to a back injury! I have now healed sufficiently to allow short (very short!) spells at the workbench, so I did a little preliminary painting on the first driving coach of the Bachmann class 350.

I have also removed the pantograph and associated insulators and conduits/bus bars from the appropriate coach, Some holes will require a small amount of filling before painting but as I won't be using the vinyls here that can be done at any stage of the conversion process. I noted from photos of that coach in Modern Locomotives Illustrated that one of the underfloor modules appears to be absent when compared to the 350. I would assume that it was the AC high voltage step-down transformer and equipment. This was a rather nicely moulded separate fitting on the model and was easily levered out with a small flat-bladed screwdriver.

The vinyls come with panels to cover the pantograph well, the red and orange flashes on the roof and include a red panel for the driver's cab air conditioning unit. I decided that I would actually paint the drivers aircon unit red and dispense with the vinyl panel for that. I have also decided that I will paint the roofs, ends and skirts (above the underframes) blue. The photos show the first thin coats of red and blue. These are still very thin and do not necessarily reflect the final colouration of the panels.

The vinyls themselves may be seen on Electra Railway Graphics' website at http://www.electrarailwaygraphics.co.uk .

Photos are of only the first coach at this point.

I don't know how rapidly I will be able to progress with this project but I will take photos at each stage - hopefully slightly better ones than these!