It's been a long time since I posted anything in my blog. However some of the items I've been working on have been documented elsewhere on RMweb :
GWR 1854 Saddle Tank conversion from Graham Farish 57xx
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=904684
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=922762
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=925638
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1025075
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1028773
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1045639
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1066142
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1067384
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1071008
3D Printed Outside Framed Brake Van
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1072380
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1075225
Goods Shed
http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1098981
The shed itself is based on the drawings of the one at Moretonhampstead in GWR Branch Line Termini Vol 2. It is constructed from 0.030" plasticard with Slaters embossed stone plastic sheeting each side. The corner stone quoins are small rectangles of 0.030" welded on, and made good when dry with a file. The shed crane has also been documented elsewhere (http://www.rmweb.co.uk/community/index.php?/topic/65499-whats-on-your-2mm-work-bench/?p=1102447). The office door is simply another rectangle of 0.030" with a 0.005" panelling section welded on (after carefully cutting out the panels of course!) The window frames are also 0.005" plastic sheet carefully cut to shape and size (a little at a time for the arch until happy with the fit in the window opening). The glazing bars were drawn onto thin Cobex sheet with a ruling pen and fitted behind the frames after they had been paintetd. To accomodate the windows, the rear of the 0.030" inner core of the wall around the window openings was carefully chiselled away to form a rebate to allow the frame and glazing to not interfere with the fitting of the interior embossed stone sheet.
The stonework was given an all over coat of a mortar coloured buff enamel that I mixed from a humbrol pale brown colour and white, and when dry the stones themselves were tackled by dry brushing various shades and tones of grey enamel diagonally across the stone surface so as not to clog up the mortar lines.
The wooden weatherboard above the rail entrances was built up from 3mm wide strips of self adhesive printer paper from Rymans, each strip overlapping the one below by about 1.5mm. These strips were built up on 0.010" plastic sheet, and once a suitable sized piece was made, a circle cutter was used to provide the archway, and the remainder trimmed away until the item fitted neatly in the rebate provided by the embossed sheet and quoin surround.
Weatherboard under construction
Weatherboard archways fitted in position
I've just made a start on the roof, which has the soffits (? or perhaps they are gable ends? or eaves?) built up from layers of plastic sheet added so that it is a snug fit over the end walls. Once this is thoroughly dry (tomorrow) I will file the layers back to give a smooth
finish. I will probably make the slate roof in the same manner as I made the weatherboarding, but because of the prominence of the roof in a model I may well draw up the slates on the PC and print them onto the self adhesive sheet first - I can feel an experiment coming on :-)
Trial fit of the roof. The interior roof trussing will be added before final fixing
- 9
8 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now