So, with putting other plans on the back burner after a recent move I've started to think on what is more feasable in the shorter time scale compared to the other ideas I've had (or Natalie's had).
So with that in mind I've decided to start looking into a layout based upon the woolwich dockyard area.
Why Woolwich Dockyard? well I was born in Woolwich and grew up in Barnehurst, so have an affinity with the area. Mostly I recall Networkers over EPBs as I wasn't relaly paying attention to trains back then! computer games and aviation modelling had my eye far more (still do to some extent). But I've always loved looking into the history of where I and my family grew up. I'd use the North Kent lines almost daily in the late 90s and they were the only option if going further than Bromley or Eltham usually. In my final year at University in London, I lived in Woolwich, not far from Woolwich Dockyard station, so Networkers and other traffic were familiar sights.
For ease of stock buying/costs initially I think it'll be easiest to go with the late 1980s to early 1990s period when 4-EPBs/2-EPBs were common and 465/466 were still in testing. So a couple of 4EPBs and a single 465 should cover running needs initially. I've one 4EPB on the 'workbench'* and the Hornby Networker awaiting attention.
At some point back dating to the 40s/50s/60s would be nice, to have a mix of earlier electric units (4SUB?) and steam (C class?), but that's a longer term goal. But with it in mind I'll be aiming to make buildings etc removable (which will aid storage).
Features will be:
- Time period initially late 80s/early 90s - i.e. just before privatisation.
- EPBs main units with one 465 or 466 on trial runs.
- No stations. Just simple track work running lines.
- Level crossing for interest (based upon sand street)
- Junction off to the dockyard
- Cassette fiddle yard
- Portable/modular to allow easy storage - thinking about IKEA INGO tables or old dresser draw fronts for main boards to save money.
I've still to finallise a plan and have been discussing it with Natalie for advice/input.
I've already got one Hornby Networker, with parts to hopefully make a 465 unit. I'll likely add another 466 to the fleet. I might look at remotoring the Networkers as the Hornby unit isn't that good at all really. Wondering if spuds or similar would work, or using a 73/bil/better power bogie and changing the sides?
I've also got a Bachmann 2-EPB, and have the parts to do the Replica 4EPB conversion plans. At some point I'll source iether a Bachmann 4-CEP chassis or get a Replica powered chassis for the 4-EPB.
That should give enough stock to start with.
Thinking handbuilt/C+L/SMP track with PECO code 75 off scene. Thankfully idea only really has 2 points excluding any off scene! With this in mind would Templot be best bet to plan with?
* My 'workbench' is currently unusable due to having moved recently sadly.
- 2
6 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now