Jump to content
 
  • entries
    47
  • comments
    82
  • views
    15,837

Clovelly Road - Baseboard 2


Steam_Julie

476 views

During the last session working on Clovelly Road, I realised that the curves at the back of the layout were to sharp, for the trains to negotiate without problems. These were caused by the flanges rubbing against the inside of the curves outer rail.

 

To solve this problem it was necessary to increase the width of the baseboard. By examining the carrying case I found that this could be increased by 26mm. This has now been done.

 

blogentry-20065-0-46473800-1441220591.jpg

Baseboard 2

blogentry-20065-0-89955400-1441219660.jpg

Attached to the original baseboard

blogentry-20065-0-45654100-1441219456.jpg

Both baseboards together, with the corner rounded

blogentry-20065-0-58800500-1441219447.jpg

The underside of the combined baseboards

 

The plywood used for baseboard 2 is slightly thicker than used for the main baseboard, thus baseboard 2 is about 1mm thicker. But the top surfaces are aligned, so this is not a problem.

 

I have taken the opportunity of adding rubber feet to protect the table on which the layout is placed. because of of the change of baseboard size the feet are used are higher. This is required to allow the larger baseboard to clear the inside of the case wheels.

 

Julie

  • Like 1

8 Comments


Recommended Comments

I'm glad you've found a solution :) 

 

Is this layout designed to fit in the same type of case as 'Pack Lane'? 

 

I remember your previous layouts from 'Trefeglwys Road' onwards, and would be interested to read about how you made the decision to change to 2mm and whether you are satisfied with the new scale.  

Link to comment

2 mm modelling the layouts are smaller & lighter to carry, but the models are more fiddly to work on.

 

The ability to move the layouts on public transport is important to me, because I live on an island & don't have a car. I'm getting use to working in the smaller scale.

 

I now feel that if I had built Trefegwys Road, using the same construction methods used on Clovelly Road, it would have been a more manageable project all round. Still that's life & learning for you!

 

Julie

Link to comment

Something that I didn't mention in the blog entry is, cutting thin strips of plywood is difficult, particularly when you don't have a proper saw bench. I found that the top of my washing machine, it has a Formica top, is the correct height, and provides a very stable work surface.

 

I would advise, if you are not the domestic athorities yourself, that you ask before trying this out for yourself.

 

Another technique I use when working with small pywood layout construction is to use lille pins as micro panel pins. This is very difficult when you start, but it prevents splitting of small blocks and works well in holding the work together, whilst the glue is setting.

 

Julie

Link to comment

Thank you for your replies to my questions.  A lot of my own constructions are 'experimental', so I know exactly what you mean by "life and learning".  I keep wanting to pull everything to bits and start again!  At my age, I don't feel I could manage the detailed work involved in 2mm (eyesight, etc.).  I often see Julia's (-Missy-) work at exhibitions and find it awe-inspiring!

Link to comment

I'm hoping to soon be doing some work on Trefegwys Road, to reduce the weight of the baseboards &.thus make it more easily transportable.

 

Julie

Link to comment

It'd be nice to see more of Trefeglwys Road.  I found it a fascinating project based on an interesting location :)

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...