Jump to content

Moyse 32 TDE Locotracteur (REE)




This model by REE represents a Gaston Moyse 32-tonne 'locotracteur' from around 1960. REE have released the model in a variety of liveries, and with and without lamps. There are also analogue (DCC-ready) and factory-fitted DCC sound models to choose from.


Moyse locomotives seem to be quite rare in Britain, but there are at least two possible precedents: a locotracteur of 1929 at the Atlas Stone Company near Meldreth (Cambridgeshire), and a much later diesel-electric shunter named 'Autumn Gold', which worked the railhead of the Stockton Haulage Company in Middlesbrough during the 1990s. The model appeals to me because it fits within the British loading gauge and it looks at home on my layout. It also has a very well-engineered chassis. I am pleased with it, so this attempt at a review is probably a bit biased.



The model has some features of an SNCF engine, like the exhaust silencer mounted on the roof, while photographs of engines in industry have a silencer in front of the cab. So I suspect the livery on this particular model is freelance, but typical of industrial use. The model measures 30 mm across the width of the running boards and 42 mm high above rail level. These dimensions represent a prototype 8 ft 6 in wide and 12 ft high, so the model fits happily inside the usual British loading gauge in 1:87 scale.


The model has a moulded plastic superstructure and a die-cast chassis. The mechanism fits entirely below the level of the footplate and running boards, leaving the inside of the cab free from obstructions. The pcb and its blanking plug for a decoder are hidden inside the bonnet.



The dimensions and detailing of the model are exemplary. REE have captured the curved shapes and proportions of the design very well, and the model seems to include all of the physical details of a typical prototype. The cab interior includes duplicated left- and right-hand controls, and a model of the rear of the engine.


Performance is also very good indeed. I suggest, this is largely because the model has a compensated chassis with one axle fixed and the second axle pivoting around the axis of the worm. So the model always has all four wheels on the track, and not usually three out of four.


Out of the box, my model ran perfectly through my Peco code 75 pointwork but struggled to get through through my H0-SF points. Upon investigation, I found the wheel back-to-backs had been set to 14.3 mm in the factory. I took the wheels out of the model to adjust the back to backs, so here is a view of the compensation arrangements in the chassis:



I now use two gauges to set back-to-backs, one 14.4 mm and one 14.5 mm, making sure the smaller gauge fits and the larger gauge does not.


The model weighs just 78 grams but it produces enough traction to haul or propel a bogie van (my Mk1 BG) up a 1:20 gradient. This is rather better than any other four-wheeled chassis I have ever had, in 00 or H0.


I bought one of the analogue models. I am not a fan of 'DCC sound' (I usually turn it off after a few seconds) but the factory DCC sound version of the model does include a stay-alive circuit and I have watched such a model run for about ten seconds after being lifted away from the track. The analogue version saves £100 but a non-sound PluX decoder costs most of £30, and it is probably worthwhile paying the extra for the stay-alive feature, even if you never use the sound.


The things I would like to change are to darken the ventilation grills on the bonnet, and add a driver figure. The buffer heads are separate mouldings and will pull off, and I could try fitting some round ones in their place too. But really, as a ready-to-run model train, I do not see how it can be any better. I think it will become the pilot at Fairport, to detach wagons from incoming trains and move these wagons around the yard.P1000448.jpg.d3dc20c347ae4b8eba19a53507e47bf9.jpg

Edited by 47137
Edit to add entry category

  • Like 4
  • Agree 1


Recommended Comments

Hi Richard,

A great review and a wonderful looking (& performing) model. It's now truly hard to resist!



  • Thanks 1
Link to comment
  • RMweb Gold

I agree, some locos just have that X factor. In fact, there's an idea  for model railway event :D

  • Like 1
Link to comment
  • RMweb Gold
On 05/03/2019 at 17:27, Mikkel said:

I agree, some locos just have that X factor. In fact, there's an idea  for model railway event :D


A most thought-provoking comment.


When I visit a railway, I expect to see some familiar things and I hope to see something a bit out of the ordinary. For Shelf Island, as a British territory with through workings from Great Britain, I need to capture a 'look', in which most of the trains are British; and all of the trains can reasonably co-exist at the chosen time (currently, 2012).


For both objectives, there is a slippery slope of introducing too many appealing but incoherent foreign prototypes. For the passenger stock, everything is British. For freight, I think I should aim for around 70% British, 20% Continental ferry/channel tunnel stock, and 10% built or modified by the railway's own workshops. For the engines and self-powered vehicles,I have, amongst the British items, one Norwegian locomotive (a Di8, which works in British industry), an Austrian tram (on hire from Blackpool) and now one French shunter.


For this scenario, I can imagine picking up an Ian Allan book  "The Railways of Shelf  Revisited" and the whole thing still looking believable: "the railway still runs its Moyse 32TDE, unique on railways of Great Britain but renowned for its robustness. Indeed, when Gaston-Moyse closed in the 1970s, one of the primary reasons cited was a lack of sales because their engines were so well-built. Prototypes from the 1930s were still in service around the World".


But it is a slippery slope. I also have an Alco S1, supposedly bought from the Steel Company of South Wales, but really I perceive this as the predecessor to the Di8. I can run one or the other but not both.


I have just bought an Austrian personnel carrier, the X.625 by Liliput. This is useful to me because it is DCC-ready; the Bachmann Wickham trolley for 00 is tolerably oversize but nigh-impossible to convert to DCC. I think, I can get away with the X.625 if I move the exhaust from the side to one end, and repaint it in yellow to match the other civil engineering vehicles. But this is probably the limit of foreign items for the railway as I imagine it in 2012, unless I gather up trains for an earlier period.

Edited by 47137
  • Like 1
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Create New...