I will have to put an order in for this when it is ready 

Here are the prints for 62384. I have made this like 62287, being more sectional, and maintained the detail so that it is easier to fit lighting to. I have included recesses for a decoder/connections and wire runs in the model. Tolerances mean a little opening up of holes may be required to assemble but I am using locating pegs for the roof to aid assembly.

I thought I’d make the bogie side fitting a bit simpler. So I re-printed the sides joined together so they would sit over the Bachmann ones once the sides were cut off:

Since the bogies  have the conductive wheel guides it’s a simple job. Saves the mess of trying to file them thin and flat!

..as bought:

remove the sides

and add new one. 

I also bought some M2x40mm screws and added a nut housing to the roof. Now the coach chassis, body and roof can be secured with the screw and not glued… pictures to come…

Detailing under way. Everything is removable so I can add the lights at a later point!

On track: