ARC Hanson JHA Part 4: Revised 3D Model
I've been working again on the 3D model and refining it to the next version ready to print:
Refinements include:
- Revised secondary dampers (shown in blue) with extra strengthening (these broke in the first test prints). These also now have their own sprue (shown in green) to try and stop them breaking off during the printing and cleaning process. Spare dampers are also included in case of breakages.
- New mechanism for inserting the wheelsets. With two Markits brass bushes positioned flanges to the middle on the axle, the axle can be inserted from below. Bushes are then pushed outwards. The missing piece of the bearing housing has also been included so it can be glued in place after the wheels are fitted. These pieces are printed on the spacing sprue between the frames (you can't see the sprue in this view but it's there!). Again, I've included two spares in case of damage or loss.
- Extra bracing to add strength to the side sub-frames
Note: all sprue elements shown in green and included to try and minimise warping during printing. These are easily cut off from the final print.
- 4
6 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now