The rest of the strengthening ribs have been added together with the half etched rivet strips and the corner strips. For the corner strips and the rivet strips I used 179 degree solder cream and my RSU. Everything went together nicely although the end rivet strips and ribs needed trimming to suit the hopper angle;
The instructions ask you to drill holes in the hopper floor and chassis, bolt them together, solder, then remove the bolts and fill the holes. I decided on a different course of action, first of all I drilled some 4mm (approx) diameter holes in the chassis floor;
I used some 8mm diameter neodynium magnets (£2.99 for 10 of ebay!) to clamp the body to the chassis;
Then I used an assortment of rules, parallels, and squares sitting on a mirror to check alignment;
Then I used the drilled holes to make a discreet joint;
145 degree solder was used to make this joint.
Not pretty, I'm afraid that my 25w Antex was not quite up to the job. Still, the joint is sound and will look better once cleaned up.
Now, can anyone recommend a good 40w Iron?
Paul.
- 6
7 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now