Delph - Control Panel - A start is made
One of the problems I've created for myself is that the layout is being/has been wired in a way that means nothing can really be tested without the control panel being connected and so far I had not made any progress with this item. I've now made a start sing a panel case bought from Squires.
I must say, it has a sort of 1950's Sci-Fi film laboratory (think Quatermass or Blob from Outer Space type of thing) look to it in my view. However, since the layout is set in the '50's, that might be quite appropriate.
Progress to date has mainly been marking and drilling for the various switches and LED's and fitting the plug & socket (2 x 25) for the connections to the layout and 2 x 5 pin DIN sockets for the main DC and DCC controllers. The two large rotary switches select the main or yard controllers or DCC for the two track sections (main/platform line and loop/yard).
The point and signal switches are set out like a signal box lever frame and have appropriately coloured levers.
Still lots to do, but at least work is under way.
Here's the panel with the lever frame and section selector switches fitted and holes drilled in the mimic diagram panel for an isolation switch and various LED indicators.
Here are skectes of the two panels.
Dave.
- 3
1 Comment
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now