I've thought for a while that in order to add a bit of variety during operating sessions, Sherton Abbas could do with a few wagons from companies other than the GWR. The layout is set in Dorset, so likely candidates would be from the S&DJR, MSWJR, and Midland companies. During the weekend exhibiting the layout at the Telford O gauge show, I bought a couple of kits from Furness wagon works ttps://pregroupingrailways.com/wagons/ in order to build a couple of S&D examples.
I find it much easier to paint coach sides "in the flat" rather than when the coach is fully assembled. This is obviously impossible with etched brass kits, soldering painted sides would be a challenge, however with plastic kits it's not a problem. The Slater's sides come in two halves which have to be joined, fortunately the Guard's ducket helps hide any join line. I think it looks more realistic if coaches have a few windows open, so micro strip was used to represent the top of the dropligh
When I built the original fiddleyard for Sherton Abbas, the plan was to have a 4 foot six diameter "turntable" that would avoid having to touch the stock during operating sessions. The reality was that it was just too unwieldy, heavy and cumbersome to spin right round, so ended up just being used as a sector plate. I've been considering building something lighter and more manageable for sometime now, but other modelling projects were always much more interesting, so it remained a "get round to
Just a quick post to thank those who came to see the layout at Guildex in Telford last weekend. It was pleasure to meet everyone, Al and I enjoyed the event immensely It was a really well organised show, being able to drive the hire van right to the space allocated for the layout almost made setting up the boards a pleasure! So much easier on the knees than having to carry the boards across the exhibition hall
The layout behaved itself all weekend and it was good to be able to op
Although I've got a few horse drawn vehicles on the layout, I haven't got anything suitable for transporting goods from the station into the town. While I was at Guildex, I found a white metal kit from Duncan Models http://www.duncanmodels.co.uk/ that looked like it had the potential to make a simple flat bed wagon.
Duncan Models flat cart
They also make a nice range of horses, I chose to use their Shire horse. The horse is cast in a running position,
I usually take pictures of the layout using my iPad, but thought I'd have a go using a compact camera for a change. I've had a Panasonic Lumix https://www.panasonic.com/uk/support/discontinued-products/cameras-camcorders/dmc-tz60eb.html for a few years now, that I use on motorcycle trips and for general photography. Although generally happy with the results that I get from it, the smallest f stop that it will go down too is F8 and I thought this would cause problems with depth of field on mod
I spent the weekend exhibiting Sherton Abbas at Railex http://www.railex.org.uk/ accompanied by Al (Barry Ten), to whom I'm indebted for all his hard work setting up the layout and for his ninja like operating skills
We arrived in Aylesbury around 6.30pm and took about 90 minutes or so to unload the hire van and get the layout set up in the exhibition hall. Everyone was very helpful and welcoming, particularly David Lane (David Bigcheeseplant) who's the exhibition manager.
So far the only coaching stock that I've built to use on Sherton Abbas, are a rake of 4 wheeler's along with a solitary all 3rd bogie clerestory. To add a bit of variety to operating sessions I've decided to build some more passenger stock and thought I'd document their build in my blog.
The Slater's kits comprise of really well moulded plastic components for the majority of the coach body, accompanied by lost wax castings for for detail parts. The coaches run on etched brass bogie
I was posting some pictures of Sherton Abbas on the "O gauge Guild" forum https://www.gauge0guild.com/, where it was pointed out that my poor signalman had no means of communicating with the rest of the world. This situation obviously had to be rectified by the addition of some telegraph paraphernalia! I spent some time researching the subject, but as is so often the case in this hobby, the more I read the more questions I needed answering:-) During my search I came across a number of intere
I mentioned in a previous blog entry that I was trying to to make a representation of the diamond embossed edging stones that the GWR commonly used on their platforms. I tried scribing some using a fine tooth saw on plastic card, but they didn't look very convincing I'm afraid. I thought that something manufactured by cadcam might be the answer, but quite how that was achieved was something completely out of my skill set!
At the Bristol O gauge show back in January I met Chris Ward of CW rai
Once I was happy with the overall size and shape of the bridge, the underside of the arches, parapets and abutments could be tackled. South Eastern Finecast brick embossed sheet was wrapped around a curved former of a suitable diameter (Empty bottle of Aussie red wine!), then placed in a bowl of boiling water and allowed to cool. Once back to room temperature the sheet stayed in a reasonable curve and was glued to the underside of the bridge side walls. Flat embossed plasticard sheet was also cu
In my imagination at the other side of the road bridge lies Sherton Abbas's engine shed, turntable, water tower and ash pit.
However the Station Building would need a water supply and in 1904 it probably wouldn't have been connected to a mains supply. I've also thought that it would have been more convenient for locomotives requiring water to be able to access a supply near the platform rather than having to go to the engine shed. I'd appreciate any
The snows have melted and spring has definitely sprung at Sherton Abbas! I've thought for a while that although there are plenty of trees at either end of the layout, the centre is looks somewhat sparse.
Centre section of the layout
I made some more trees using wire armatures, artex powder, postiche and Greenscene scatters as outlined in a previous blog entry https://www.rmweb.co.uk/community/index.php?/blogs/entry/17699-trees/
The air temperature in Sherton Abbas has been plummeting over the last few days. A winter like this hasn't been seen since the mid 1890's when the Queen was still on the throne. https://en.wikipedia.org/wiki/Winter_of_1894%E2%80%9395_in_the_United_Kingdom More snow has been forecast to fall this evening and reports are coming in of heavy drifting further North.
Despite this bone chilling weather, passengers are arriving at the station in the hope that trains are still running and the line
The Stygian gloom that descends upon Sherton Abbas platform at nightfall has been a concern for sometime now. Complaints from passengers about the complete absence of platform lamps has been on the increase as nights are drawing in and Winter approaches. Rumours of "Ne'er-do-wells" lurking in the darkness abound, which although completely unfounded have proved unsettling for passengers of the fairer sex. The Sherton Abbas Chronicle has been stoking this discontent and shouts of "Something must b
A previous blog entry described the building of these wagons http://www.rmweb.co.uk/community/index.php?/blog/1131/entry-21530-coal-wagons-for-sherton-abbas/
Once I’d finished building the four wagons they need painting. I’ve tried using acrylic paints in the past but still much prefer working using enamels. The insides were painted in a greyish yellow base coat to represent unpainted wood, this was then dry brushed in browns and gunmetal to represent wood grain. The under frames, internal
I've just returned from a very enjoyable weekend exhibiting Sherton Abbas at the South Hants Model Railway show in Portsmouth. https://www.shmrc.org.uk/event/2018-shmrc-exhibition/ We were made very welcome by the hosts and even provided with an excellent fried breakfast at the exhibition hall before the public arrived:-) It was good to meet up with other RMweb members who came over and introduced themselves during the day.
The first time the layout ever left my workshop was when I took it t
Autumn is here, the nights are drawing in and thoughts once again turn to modelling!:-) As I mentioned in a previous blog entry http://www.rmweb.co.uk/community/index.php?/blog/1131/entry-20890-coal/ I've planned on building some private owner coal wagons for Sherton Abbas and now the layout is more or less complete the time has come to make a start. I wanted to represent wagons that would have been running in the Somerset / Dorset area circa 1905 and found the information contained in this book
One of the drawbacks of modelling a rural location is the number of trees needed to make a convincing landscape! There's only so much fun to be had twisting lengths of wire together and I find stippling an Artex/PVA mix onto wire armatures soon loses its magic:-) Despite all this I've managed to summon the enthusiasm to make a few more trees for Sherton Abbas! I used the same techniques as discussed in a previous blog entry http://www.rmweb.co.uk/community/index.php?/blog/1131/entry-17699-trees/
I outlined the construction of one Parliamentary models wagonettes in a previous blog entry http://www.rmweb.co.uk/community/index.php?/blog/1131/entry-18072-horse-drawn-wagon/ but have only recently got round to painting a horse to pull it. There then followed an enjoyable bit of research into how horses and carts were connected together. Equine harnesses, traces and reins are a lot more complex than I first thought, thank goodness railways didn’t employ anything similar to connect their wa
Just a quick blog entry to show that a water trough and some horse poo have been added to the scene:-)
The water trough was built from 40 thou plasticard sheet, then "distressed" using a rose head bur in a rotary hand piece to give it some texture. The water is a represented using a clear sheet of plasticard painted on the underside with a dark green/black colour and held in position with a dab of epoxy resin. Once painted the trough was sat into the yard surface and some weeds around the ba
The uncharacteristic sunny skies above Wales this Summer have meant little time has been spent modelling, motorcycling and other outdoor pursuits have taken precedence. I have however managed to finish the coal yard scene that I started in the previous blog entry http://www.rmweb.co.uk/community/index.php?/blog/1131/entry-20890-coal/ back in the middle of May! As Stubby pointed out the ground around the coal heaps looked a bit too clean, so coal dust and artists pastels were used to blend the co
During the Newport show I had an interesting conversation with Ian Pope of Lightmoor Press who was exhibiting his collection of private owner wagons. I'm explained that I was interested in building some coal wagons for Sherton Abbas and would like them to depict coal merchants that were trading in the Somerset/Dorset area circa 1905. He recommended a book on the topic http://lightmoor.co.uk/books/private-owner-wagons-of-somerset/L9877 and said that he would do some research for me. True to his w