Having got a rolling chassis I turned my attention to the footplate. The one from the kit was unusable so a brass plate cut out and the valance added.
Next part, splashers. The DJH Dunalastair 1 is a kit for OO. With EM you need about 23 mm to clear the wheel fronts, the cast wm ones were much too thick to be any use. That also made the cab too wide. I rather think that the kit was always a bit too wide, in EM it was going to be far too wide. There was no way the outer splashers would clea
The latest kit from True Line Models represents a horse box built by Metropolitan in 1870 for the CR. This is a different method for TLM being a resin print. I have used 3d printed parts but this is my first go at a complete 3d printed wagon.
Removing the body from the supports taught me just how brittle resin prints can be. Since I want a practical layout vehicle I decided to reinforce the steps and springs with 0.3 brass wire. Wheels are on MJT internal compensation irons soldered
Well, my name is Dave and I am building my second layout themed on the Caledonian Railway in the Edwardian era. The first was called Kelvinbank, and since I live 200 yards from the river kelvin which flows through the west end of Glasgow I think I shall stick to the name.
You may well ask, if he has built one already why is he building another? Simply put, the sky fell in. Not the real sky, but to the 4mm scale figures on the layout half a ton of victorian lime plaster falling from a
The 1870 horsebox is now painted and in service. Once primed I liked the overall level of detail, the top hinges and the dog box end show a slight bowing out but not severe enough to merit a substantial alteration. I think it would be in plain coach brown by the 1900s, compartment interior off white and a simple bench seat added. Lettering is from the HMRS sheet. Some light weathering to bring out the details.
A couple of posed pictures.
The 83 members of the 709 Class 0-6-0 tender engines were built by McIntosh from 1895 onwards. They were the original Jumbos, all Westinghouse fitted for mixed traffic duties. Five members of the class Nos 583 to 587 were fitted with condensing apparatus for working the Glasgow underground lines.
The model dates back to the 90s, some of it from a secondhand djh kit, the rest scratchbuilt. Unusually for me it runs on Gibson sprung hornblocks. I noticed that it had developed a s
Another year passes. At a first glance it might seem progress at Kelvinbank has been slow, a few wagons made and an old loco refurbished. However from the perspective of me enjoying the layout the major step forward has been the building of a lever frame and sorting out the signalling system. So some pictures on that theme.
1 class No. 2 heads east towards Kelvinbank. The home is off if a correct route is set out of the storage yard and the section switches are set properly. The dist
Boiler next. Hmm. I had a look at the DJH one and decided to give it a bash. Well, quite a few bashes. Removed the alignment tags which didn’t align, got it in a jig of scrap wood bits and whacked a lot of lowmelt solder at the gaps. I then filled all the bits that needed filling with lowmelt and attacked the whole thing with a variety of knives, sanders and files.
Most of the “detail” on the castings was overscale and I would have removed it anyway. So after a fair amount of work I now ha
Getting the boiler and footplate fitted together was a time consuming task. Try, file a bit, try again, file a bit more. When in place I could make the spectacle plate and get the whole thing looking a bit like a D1.
So here it is actually sitting on the track. Also seems to pass the push along through points and curves without the wheels fouling the body test. In theory that means the Gibson wheels will be fine.
From the rear with the motor and gearbox in for a trial
The furniture van wagon is now painted and in service. Slight weathering to bring out some of the detail. I do think that the masterclub bolt heads are better defined than a transfer rivet though from much more than a few inches away it is hard to see.
I added a pair of crossbeams pegged into the holes in the sides to which the van is lashed. The relatively new looking sheet may have had a few more ropes in practice, though that was fiddly enough.
A few posed pictu
There is a photo in “Caledonian Railway Wagons” by Mike Williams of one of these wagons of which it it thought nine were built from 1878 onwards. No drawing but they were known to be 18’ long on a 11’8” wheelbase, enough to reasonably estimate the other dimensions.
Construction is from styrene sheet and section. Metal strips on the top of the sides had a series of holes for roping pegs, though I think they may have been threaded for an eyebolt. Perhaps a bar was pegged across the wag
I have got on fairly well with some free time over new year. The last difficult bit of the body was getting the roof soldered on neatly and adding the cab handrails. The spectacles were giving me a bit of grief, and awkward thing to form in brass. So I stopped and thought about it. 10 minutes later I had enough to do a fleet of engines thanks to the silhouette. The dome and chimney from the DJH kit fettled up reasonably, safety valve and whistle are from Caley coaches.
Once I had the frame painted and assembled I made up a mounting plate from 3 mm ply. All the connections are via a 37 way connector from the spares box so that the whole module can be easily removed from the layout to the bench if maintenance is needed.
It was a bit of ply from Eileens, some brass sections arrived taped to it so I’m glad it got used for something constructive.
A front view. I have followed the Caledonian practice of fitting a des
Some progress.
The nine levers have been cut from 2mm brass. The other parts are fabricated from tube and section. I used a pair of buffer springs to assist gravity on the stop block to give a positive feel to the action.
The frame made up from silhouette cut styrene, 3 ply. It will become stiffer as more is added but tests show that it is heading in the right direction. I chose a spacing of 15 mm for the levers. That gives about 28 mm as a gap for movi
I have never been entirely happy with the control of points and signals on Kelvinbank. Three way switches allow a signal to be set to on, off or auto. Switches set the points, in auto mode they also control the signals via short timers. It is vaguely interlocked, but not perfectly. All workable but somehow not in keeping with the period feel of things.
So. Lanarkshire and Dumbartonshire section of the CR during the Edwardian era. Built in the 1890s. Boxes would have a Stevens & S
According to the 1907 wagon census the Caledonian had 1861 pig iron wagons, of which 1300 were to Diagram 16 in various build lots to either 8 or 14 tons. Certainly the CR moved a lot of pig iron from furnaces to steelworks and foundries, but these wagons were used as a sturdy one plank dropside for anything that needed moved. One of those wagons that turned up everywhere and is very useful for forming short rakes on the layout.
These two are from the whitemetal 51L kit, they go tog
I made up most of the tender body and then spent a while getting things level. Set the buffer heights and shim the compensation beams so the footplates are lined through. Then place the loco and tender on the tightest curve I have ( about 48 inch radius ) and that gives me the minimum length for the tender - loco drawbar. The Caley coaches tender kit includes these, but the size I needed was between the two. Easily adjusted. I put the whole thing together and ran it up and down for a while. Tend
The body needed a fair amount of sorting out, a lot of bits fell off when it was being stripped. It isn’t the best paint job, but painting is not my favourite activity. As ever with the CR a lot of awkward brightwork but I have tried to tone it down a little to give a practical in use look. I also simplified the lining a bit.
The main reason for the rebuild was to improve running. So a bit of video showing 263 on a trip worki
Following WW1 the Caledonian, like many other railways, were short of locomotives. They therefore hired 53 surplus Robinson ROD 2-8-0 s from the large pool available locally at NBL . They ran 1919 to 1921. A comprehensive thread is available on the CRA forums
Really it is a decade out of my time period, but Hattons were selling them at low prices so I bought one ( BR, ex GWR version ) just to see what I could do with it.
First off loco chassis. I could buy all the stuff a
Drummond built two of these small 0-4-2 tanks in 1885 for working the Killin branch. The design ran well and formed the basis for the Caley pug. Superseded by 0-4-4 tanks in 1895 they travelled the CR network before settling at Dawsholm shed where they worked the North Clyde industrial lines and the odd passenger working. So my period and location. Last one withdrawn 1947.
I made the model mid 1990s I think. Some of the body is the old Jidenco etch made originally
Having built all the signals it seems like a good idea to install them. The first step in the process is the baseboard waltz. Way back I was asked about my baseboard construction, and I said I would post some pics when I shifted it all about. Much has been said about baseboard building over the years but it basically boils down to designing them to suit the type of layout you want to build in the space available. So firstly, castors. All the boards and for that matter the workbench and various
All things considered the modifications to the body were straightforward. It all comes apart easily and the plastic seems to work well. The list of things which need to be altered to make a Caledonian version are as follows;
Replace buffers with continental style ones. ( these are from shapeways)
Fit westinghouse pump, smokebox rhs.
Remove safety valve cover, fit ross pop valves.
Square off and slightly reduce chimney height.
Reposition and fit single whistle.
Time for spring cleaning so I have given the railway room a good going over this week. Dust accumulates and I’d rather be making stuff but if I don’t keep on top of it I will have twice as much to do as all the stock fills up with fluff. Not to mention all the points, signal and things that just seem to jam up if you don’t.
However essential cleaning is it cannot be described as photographically interesting.
This is a LNWR D 466 open carriage truck made from the 51L etch
The Diagram 6 brake vans are now in service. I tried to give them the look of vans approaching 20 years in service, used but still kept in decent running order.
The Caledonian often allocated brake vans to a particular branch or section and lettered them accordingly, several examples are shown in the wagon book. I have lettered one for the Lanarkshire and Dumbartonshire section which is the line I model. Although I cannot be sure that is correct there are pictures of other vans lette
Mikkel asked what was between the main part of the layout and the Viaduct sections. The simple answer is a gap. The boards need to move towards the window wall to give them enough room to swing round into the room to be worked on, so they stop short of the window wall by a foot or so.
I always had a vague idea that I would build a lightweight scenic extension to take the eye round towards the window. Well, I have finally got round to it.
The latest kit from True Line Models is for the CR Diagram 6 brake van. Build dates range from 1883 to 1889 and cover three known body styles across possibly 55 vans. Kits are available for two body styles, the narrow and wide panelled builds.
So a pic of the bare etch.
You might think that these look very like the NB D33 vans. Well, the link is that man Drummond again. So since NBR developments do an etch for that it seems sensible that TLM asked them to d
