Well i've been busy over the Xmas hols building and laying track to the point that i can say it's finished. Maybe just a bit of tidying up here and there. Now all i've got to do is wire it up and fit point motors etc. Then it's time to do some scenery, which is something i've not done much of (Yet) .
Here we are on it's side to make wiring easier.
Thought it was about time i published something that was finished, so here is a photo of the finished signal.
It's been delayed be the fact that we have been planning an extension for the layout and was unsure if it was going to be repositioned. Now we have decided it's staying put i'll fix it down and set about the operating unit, but more of that later.
LBSCR B4 an LRM kit by Weskie
by Weskie
original page on Old RMweb
__________________________________________
??? posted on Mon Mar 24, 2008 8:30 pm
I'm going to blame Andy Y. and the Modeller of the day comp. for starting this new thread.
Also the lousy weather we are having over Easter.
But it did get me quite eager to do some modelling. So here goes.
This is a London Road Models kit for a LBSCR B4 that I started about a year ago! It's gone together very well so
A newcomer's work bench!(Clarendon Signal)
by Weskie
original page on Old RMweb
__________________________________________
??? posted on Sun Sep 23, 2007 2:34 pm
Hello all. I'm new to this forum so apologies if i make a mess of it.
It's nice to see what some other people are up to,so i thought i'd join in.
Cue picture of signal on bench. Well probably better off not seeing the bench, it's a mess but then aren't they all?
[/img]
The signal is a LNWR 55ft bracket signal with
Weskie's Workbench: LRM Precursor chassis
by Weskie
original page on Old RMweb
__________________________________________
??? posted on Sat Nov 01, 2008 7:19 pm
For my latest project now that the dark evenings are here, I am building a new chassis for a LNWR Precursor tank. The chassis kit is the new updated version that Jol Wilkinson has designed for the London Road Precursor tank kit, replacing the previous Brassmasters (I think) one. I built the loco about 5 years ago and ne
My Layout
by Weskie
original page on Old RMweb
__________________________________________
??? posted on Sun Dec 30, 2007 10:11 pm
Hi All
Well after years of not finishing a layout, or even getting anywhere near to finishing. I thought i'd give it another go!! So i resurected a couple of baseboards from a previous project. In true 'Blue Peter fashion' here's one i made earlier!
(6mm ply, double thickness at ends, and cross braced.)
Then after a couple of hours play
Well here is my first posting on the new site, so more of a test to see if it goes alright
So while RMWeb has been down i've got round to some modelling, which i am sure a lot of you have also done
This is a london Road Models - LNWR 42ft bogie lavatory brake composite, sat on MJT coach compensating units and Exactoscale wheels.
Plenty to finish off but it's a start.
