I just built this.
Limited edition kit #168.
I've had it for a very long time, and each time I looked at the manual, I just put it away again...
The big issue was the tapered tank and the bands.
I just bit the bullet now and built it!
The base was rather easy to build.
To solve the tapering of the scale 8"x 2" planks, I made a fixture in my 3D printer.
The planks was to be reduced by 1/64" on one end... So a good fixture was crucial.
I really like the Rail line kits!
Sure, they have a bunch of miniature parts to be fitted, but the results are so worth it!
I started on this D&RGW 3000 series boxcar the other night.
I painted it with Testor DRGW freight car red and then Microscale gloss before adding the San Juan decals.
It took a LOT of MicroSol to make the decals conform to the planking.
I used my own designed/printed trucks with Kadee wheelsets. They are very suitable for this car, as the coupl
Hi all, I've made a control panel for my layout.
I used 10 mm thick MDF.
It's 18" x 6.5" in size, which was the minimum I wanted.
I drew the plan and then drilled all the holes for the LEDs and push buttons.
I counter drilled the holes from the backside to make it possible to add the LED and the nuts for the push buttons.
I primed it with cellulose first and then black Badger Stynylrez primer.
I then airbrush painted white where the track lines were going to be.
I built a new workshop next to my layout room.
The layout is in the back of my big garage (1700 sq.foot), and I really needed a warm clean space to build models in....
This is how it looked on the 5th of January:
I had new doors installed last year.
Some of the lumber.
New door to the workshop.
I framed the walls with 2 x 4 lumber.
The room will be 17' x 15'.
OSB sheets over moisture barrier.
Door installed and sheetrock finished.
Spruce/fir trees 2.0
Faller's fir trees are really not at all good looking, but with a few minutes of work their appearance can be much improved.
I use Polak model turf and some spray adhesive for this project.
They are very coarse as they are...
I trim the armatures to avoid the cone shape.
Less is more...
I applied some spray glue and two layers of turf.
This group of five trees took me 10 minutes to do, a time that can be reduced severely if made in
I've started with the plaster work on the mountains.
I use a mix of WS moulds, home made latex moulds and alu foil.
The plaster is regular plaster of Paris.
I prefer to cast in situ. I wait until the plaster shows small wrinkles in the mould before placing it on the mountain.
I carve the surface with WS rock carving tools.
May need some more plaster in places.
I test painted the mountain...
I use regular acrylics and WS earth pigments.
I made a tool for embossing stones in DAS clay.
The tools and stuff needed. DAS clay, an empty sugar dispenser, rolling pin, knife, glue and a good supply of small pebbles.
Roll out some clay with the rolling pin, it should be large enough to cover the plastic tube and be around 1/8" thick.
Emboss the clay with the pebbles.
Wrap it around the plastic tube, seal it together by pressing it. Then emboss stones at the seam.
When dry, seal the clay w
I'm building on my layout again after the summer months.
The town of Holy cross on my HOn3 layout is slowly taking shape.
But, I realised that the station took up too much real estate.
I therefore decided to move it to the aisle side of the rails.
The space was a bit narrow though. So, I decided to cut the building in half lengthwise.
That makes it possible to see the interior of it and make it a bit of a show point.
I have built one of these before, but that one got sold.
This one is built more or less as it was out of the box, as the former one was heavily modified to match the original blueprints...
The kit contents.
The new parts added, turnbuckles, stirrups and couplers with boxes.
The frame started.
The subframe for the body and roof. Notice the paper strips glued to the frame sides to shim it to the correct width.
I got this very old Kemtron kit from a friend of mine.
It is etched from very thick brass and had to be filed to shape....
I will use plastic trucks as the brass ones included wasn't of the caboose sort with leaf springs.
The amount of heat needed to solder this kit was daunting....
The shape of the roof had to be shaped with a mallet over a wooden form due to the thickness of the brass.
Finished and ready for paint.
Made a little more progress on my LaBelle boxcar.
Only a few brake parts and coupler pockets remain to be mounted before painting.
I also finished a reefer marked for my railroad company.
Painted and decaled the boxcar.
I had a little mishap... I was going to add the handbrake chain, and I took a piece out of the box and soldered it in place.
Then I realized that it was the wrong kind of link!
I had taken a piece of an
I built a LaBelle HOn3 gondola kit, and decided to make a honorary car for my late mother Yvonne who died last year of cancer.
I have already a mine on my layout called the Ywon mine.
So this became the Yvon/Ywon Gold mine Co. car number 47 (as in her birth year).
Weathered to represent a well used car that has shipped a lot of gold ore.
The text are dry transfers. The boggies are 3D printed from Shapeways with Kadee wheels.
The couplers a
My Westside models C25 in HOn3 will be getting some upgrades.
It already has new gears installed and will now get sound, lights and a good paint job.
I will also improve the power pick-ups with added wipers on the tender and the locomotive.
The parts involved (well, at least some of them...).
Disassembly of the locomotive.
The main parts cleaned with soda and repaired. Some loose solder joints that had to be fixed.
The track laying continues, I have only 12' of dual gauge tracks left to do....
<iframe width="560" height="315" src="https://www.youtube.com/embed/FFFUjBlHnA0" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Westside models K-27 #460 in HOn3 dismantled in preparation for painting. These engines are like Swiss watches in their build quality. A pure joy to work with. I have prepared it for LED lights in both the front and rear headlights. It will get a Soundtraxx DCC sound decoder with a sugar cube speaker. The D&RGW #460 is a very odd engine. It was never modernized to piston valves, neither did it get a shortened smokebox. The version I'm painting will represent how it looked in the mid -30's. I
Some of my favorite builds in HO/HOn3.
Coach in HOn3
Combine in HOn3
Caboose in HOn3
Paper model scratchbuilt.
Miller & sons diorama.
Station close up.
20 t Shay in HO
Leadville building in HO
Modified Lindbergh tug in HO
Weathered brass C-19 in HOn3
FSM engine house for HOn3
Finally some progress! I've actually managed to clear out the space for the layout. The room as it looked...
Insulation and moisture barrier installed.
Sheetrock... We all love to do some sheetrock and mud and sanding, and mud and sanding....
I rounded two of the corners. I made a backing from two layers of 1/8" hardboard.
I used 1/4" sheetrock that I wetted and bent to shape in the corners.
The backdrop is now the next step (almost..) I need to install the lighting firs
The HSM Nevada city fire station is done! It was a real challenge, mostly printed cardboard and some sticks of wood...but it went really okay I think. The bell tower has 28 parts.... Fiddly, to say the least. The interior light is a led mounted above the ceiling and has an orange colored diffuser to make it resemble gas light.
My latest build: A Stamp mill in HO scale for my HOn3 layout. I've made it from plans in the "Old wood and stone buildings" book. I CAD converted the drawn plans and as I have a 3D printer, I printed the timber frame, windows, doors, smoke stack and loading platform. I then covered the frame with Northeastern wood and the roof with cardboard covered with surgical tape. The stays for the smokestack are made of piano wire. The painting is acrylics on mineral spirits soaked wood...It makes it so
Hello! I 've had a Bachmann three truck 80 ton Shay in HO in quite a few years now.
The Shay has experienced quite a few revisions, among other things, the exchange of the cracked plastic gears with metal gears from NWSL . The largest revision was when I had gotten tired of the lousy tracking of the middle truck. That was when I rebuilt it to a two truck version:
(see http://www.rmweb.co.uk/community/index.php?/blog/638/entry-5254-part-6-shay-conversion/ )