Jump to content
 
  • entries
    103
  • comments
    361
  • views
    105,263

Judith Edge Ruston 48DS - Pick up brackets.


halfwit

1,258 views

I've been putting much thought into the pick up arrangement on these locos. My usual method is to glue a copper-clad strip across the frames underneath the loco to solder phospher bronze wire to. But there's the gear stretcher bar in the way so I looked at other methods. The method that I've chosen is to solder brackets on either side of the frame, epoxy short lenghts of copper clad sleeper strip underneath the brackets and solder phospher bronze strips in place to act on the edge of the wheel flanges. I'm using the flanges rather than the tread for pick up as the treads on small wheels are likely to pick up a lot of dirt. This also has the advantage of tucking the pick ups up inside the bodywork thereby keeping plenty of daylight under the frames.

A pic;

 

blogentry-6749-0-76655800-1355954661_thumb.jpg

 

The brackets are made from 6mm long lengths of 4mm x 4mm right angled brass with one side filed down to 1.7mm, to clear the radius arms;

 

blogentry-6749-0-86973800-1355954691_thumb.jpg

 

The only problem is that I don't actually have any phospher bronze strip in stock (about 2mm x .15mm should be suitable?) so I'm going to have to send an order to Eileen's soon.

 

A teaser;

 

blogentry-6749-0-73894000-1355954705_thumb.jpg

 

Paul.

  • Like 9

3 Comments


Recommended Comments

Paul - I have been following this thread (silently) for a while now, and it is time I thanked you for all the postings: very interesting, and informative!

 

Harry

 

Link to comment

Thanks for the comments (and the 'likes').

 

I'm glad that you're enjoying my ramblings Harry, I try hard to make my entries as clear and informative as possible.

 

Paul.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...