Jump to content
 
  • entries
    42
  • comments
    298
  • views
    39,103

Grantham Coaling Plant 2mmFS - Baseboards and trackplan laying


cornish trains jez

828 views

Good afternoon!

 

Here is my latest entry with progress on "a little slice of Grantham shed" project.

 

I have finally put the baseboard together and fixed down the layout plan using Templot. As I'm still not great with Templot, I created the different turnouts and straight sections individually, printed them out and once the board was marked out, the pieces were stuck together like a jigsaw puzzle.

 

So here is the first photo, the whole layout is 120cm long by 22cm wide. The area to the right (where there is no track plan) will be the fiddle yard. I have created the plan as close to the prototype as possible and although I have turnouts at one end which don't actually lead anywhere, this not only keeps it prototypical but also allows the possibility of future extension. There are four turnouts and a double slip (thanks to Cav - RBE - for creating this on Templot for me as it was pretty complexe and way beyond my computer skills) which I'm not looking forward to putting together so any tips on how best to tackle this would be greatly appreciated. The water tower and coaling stage will sit to the right of the plant.

 

The plan allows locos to arrive at the plant for recoaling and the area to the left of the slip is just long enough to allow a loco to run round and head back along the other road back to the fiddle yard.

 

Track plan - fiddle yard to the right.

 

blogentry-10222-0-68920400-1390133949_thumb.jpg

 

Overall view of the layout with coaling plant in position for effect.

 

blogentry-10222-0-90071900-1390133879_thumb.jpg

 

blogentry-10222-0-14032100-1390134011_thumb.jpg

 

A1 "on shed"

 

blogentry-10222-0-48435300-1390134061_thumb.jpg

 

View from the other angle - I have been experimenting with colours on this side of the coaling plant and there will be several more washes going on to tone down the colour which should look great once finished.

 

blogentry-10222-0-08259100-1390134137_thumb.jpg

 

 

I have also been adding more hand rails to the tower - they seem to be never ending! Here is the latest progress with a little trimming left to do to complete the middle section.

 

blogentry-10222-0-28686700-1390134277_thumb.jpg

 

 

Best regards,

 

Jeremy

  • Like 10

6 Comments


Recommended Comments

Jeremy,

 

This is looking really good - I've been following the build of the coaling plant with interest.  To see it in position and in context of track work must be quite exciting.  I look forward to seeing it progress.

 

Ian

Link to comment
  • RMweb Gold

That looks terrific Jeremy.

 

Always very exciting this stage as you can sort of imagine how the overall layout will be.

 

Brave man to include a 2mmFS double slip in the mix :O

Link to comment

Jeremy,

 

This is looking really good - I've been following the build of the coaling plant with interest.  To see it in position and in context of track work must be quite exciting.  I look forward to seeing it progress.

 

Ian

 

Cheers Ian. It is exciting to finally see it in context and I can now see how it will look and I'm excited about progressing the other buildings for the layout. I'll try and post regularly on the progress.

 

Best regards,

 

Jeremy

Link to comment

That looks terrific Jeremy.

 

Always very exciting this stage as you can sort of imagine how the overall layout will be.

 

Brave man to include a 2mmFS double slip in the mix :O

 

Thanks Pete! I must be absolutely off my rocker to attempt a double slip with my little experience in track building but unfortunately it's part of the prototype track plan. Not looking forward to building it, maybe someone experienced will volunteer themselves to build it for me.....hint hint nudge nudge!!!!

Link to comment
  • RMweb Gold
maybe someone experienced will volunteer themselves to build it for me.....hint hint nudge nudge!!!!

 

Having only made a sum total of 5 simple turnouts...and pretty bad ones at that...I'm out of the running...I recall there are peeps in the Association who offer a service and might step up to the challenge...

Link to comment

Having only made a sum total of 5 simple turnouts...and pretty bad ones at that...I'm out of the running...I recall there are peeps in the Association who offer a service and might step up to the challenge...

I'll give it a go and see how I get on. Not going to be an easy one!

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...