Talking Stock #33 The five Urie H16 large 4-6-2 tanks
As I mentioned in my Talking Stock #26 post here about the four Urie G16 class 4-8-0T locomotives, I do indeed have a soft spot for large tanks and therefore this post is about Urie’s other large tanks the five H16 4-6-2Ts. The later Maunsell Z class 0-8-0T locomotives were the subject of Talking Stock #19 post here, whilst Maunsell’s W class 2-6-4 tanks will soon also feature on this blog.
My model was built, with much effort, from a Jidenco etched brass kit; that owing to the quality of the kit design, thin etches and limited instructions, took a number of years of starting, doing a bit, getting frustrated and putting down again before finally getting round to finishing. Certainly not a kit for the feint hearted. She is powered using a Portescap coreless motor along with quite a bit of lead weight added to provide adequate traction due to the lightweight thin etched brass construction of the kit with only the small dome, safety valves and chimney being white metal castings.
This is an extract from my blog at www.grahammuz.com
The full post with additional information and images can be read here
- 2
0 Comments
Recommended Comments
There are no comments to display.
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now