Golden Arrow Crosti - Loco Preheater and Handrails
My attention turned to the pre-heater today, so the chassis was stripped down to release the Hornby underboiler/motion support and the resin parts trimmed up and superglued on. After a quick test assembly to make sure everything was in the right place the joins were re-inforced on the insides with epoxy resin glue.
After leaving the epoxy to set, a final fettle was needed to ensure a good fit with the chassis block and job done (apart from painting).
Note also from the photo the section of black plastic that needed to be removed to clear the side chimney assembly.
I've also fitted the handrails. I had a couple of Hornby ones left over from a previous project, so these were pressed into service. Still need that guitar string .....
2 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now