I know I promised a report on the final stages of the reworked NBL Type 2 , but a start has been made on the long- stalled Class 128 parcels unit , and it's getting a little frustrating...

This posting has been sitting in draft for four years with the optimistic stub "Progress on the 128 has been slow, but like BR we're getting there" Very slow indeed... . However on closer inspection I find I am in no sense entering into the home straight with this one

The project ground to a halt when I found that part of the bogie support at one end of the Replica chassis had sheered, and could not be stuck back together. This left one end of the chassis sitting lop-sided. I eventually found out that Replica could supply a replacement, I took it to Peterborough show the following year and they fitted the part .. and other things were higher priority and got in the way.

Having finally got round to the 128  as a result of lockdown I started by trying to fix the mistakes that had begun to nag at me while the bodyshell sat gathering dust on the bookshelf. The lights didn't look right. I removed the whitemetal castings and found they'd been glued the wrong side round. They now look a good deal better, though not perfect. At the left hand end the cab handrail should be inboard of the door. With some trepidation I clipped out my first attempt at a handrail here and put in a new one in the correct place.

There is a problem with door furniture. Two styles were fitted, one to the WR vehicles (of which my model will be one, as inherited by the LMR and modified without gangways) and one to the vehicles originally built for the LMR

A good shot of the WR vehicles is here - M55993 - ex WR and an official photo of one of the LMR units adorns the relevant Railcar.co.uk page Railcar.co.uk - Class 128 page

M55993 is going to be my "target unit" for this model:- the door furniture is visible if you blow up the photo - and I have absolutely no idea how to do the two small handrails either side of the handle , bearing in mind there would be 6 per side and they need to be exactly the same and in exactly the same places . The DC Kits instructions seem to indicate that there are two etched door handles to be applied , one on each door, and no handrails. That is definitely wrong for all units..

After several attempts I eventually got suitable door handles for the three parcels in place, using bits off an NNK/Phoenix etch for Bulleid coaches. As a fudge I've done a rendering of the LMR style handrail , using an etched grab rail from the fret. It is at least regular and neat and more or less the right side, though I had to clip out the first attempts and reposition when I found a good photo.

I also added the vertical handrails beside the windows on the cab front.

This brings me neatly to my big grumble and issue. What I bought from DC Kits was a package deal of 128 body and Replica chassis. The kit instructions are a little sparse and broad-brush. There were a couple of etches of detailing parts. Since what I'm trying to do deviates significantly from the original kit with floorpan and underframe the instructions are not always relevant anyway. There are some sketches but they are not always relevant either. And I'm finding that in a number of areas the parts needed are not included and there are parts included that may not be relevant.

To be more specific - there are no bogie parts included . Since the Replica chassis requires bogie sideframes, I'm on my own. I've managed to find an unbuilt Kitmaster Mk1 coach kit in the cupboard with plastic sideframes that can be adapted to give a decent representation (I would use MJT bogies if actually building the coach , so the mouldings are spare)

There were two fold up etched strips for the underframe equipment, but these were designed for the DC Kits floorpan moulding and the folds weren't in the right place to suit the Replica chassis. And after looking at it for several months I was certain that a fold up etched box with no detail on the face simply wouldn't convince . There are two plastic mouldings representing battery boxes in the bag of bits , so I've hacked away the etched box on each side and made good before fixing the plastic mouldings in place with superglue. But they are hollow, so I'll need to make a back from plasticard… The instructions refer to castings for engines, and two types of airtanks . No such castings are in the box. What lumps I have on the underframe look uncomfortably sparse (and thin) - certainly compared with photos. Golding's book of DMU drawings only shows one side of a 128 , so I'm left to guess if the other is the same , mirrored , or significantly different. The sketch in the kit instructions , and the two identical etched strips imply the two sides are the same but I'm not sure I trust that.

Plastic buffer beams are provided as are etched brass detailing overlays. As I can't see anything on the etched brass overlays that isn't on the mouldings , I've just used the plastic moulded buffer beams. Plastic buffers are supplied but they are round , and by the 1980s M55993 had oval buffers . I found some MJT 1'8" Oleo buffers in the bits box and have substituted those. I butchered the etched brass coupling hooks to get them in, and left off the etched shackles as they would foul the Kadees (There's no diagram to show what the components on the etch actually are)

And I'd already replaced the roof vents with MJT cast torpedo vents

In short this is looking less and less like a 128 kit, and more and more like a scratch-aid for a 128 requiring the builder to conjour up much of the build from his own resources

Progress to date is shown here. I can get a long way towards finishing this, but there are some parts of the underframe equipment where I am afraid I may find myself stumped.

And I'm starting to wonder if I was a mug trying to build my own and I should just have paid £50 for a Heljan model out of the Bargains page of a boxshifter… Because I cannot finish this to the accuracy of the Heljan model.