Jump to content
 
  • entries
    24
  • comment
    1
  • views
    5,816

Great Tunsley Dale Page 4


trains12

172 views

Great Tunsley Dale

 

by trains12

 

original page on Old RMweb

__________________________________________

Comment posted by PaulCheffus on Sat May 31, 2008 7:19 pm

 

trains12 wrote:

Hi All

Just a small update this week. have been doing other things (uder pressure from the wife Wendy
icon_grumpy.gif
) so on the layout little has been done other than some more of the plastering. Most of the work this week has been on the vertical lime klins on the piping. Some shots of this. Can anyone help me. I am looking for a small 6in. mitre block which is either adjustable for the angles or already has angles of 22, 30, 60, etc already cut in. I have the normal standard one with 90 and 45 in but have no means of cutting in other angles. Be glad of any help.

Sorry about the shots being a bit fuzzy camera needs a service , a bit like me.

Peter.
icon_thumbsup2.gif

Hi

 

Would the NorthWest Short Lines Chopper be of any use (90, 45, 60 & 30 degree but not 22)?

 

http://www.nwsl.com/Catalog/pg010-cat2-00-v0611.pdf

 

Cheers

 

Paul

__________________________________________

 

??? posted on Sun Jun 01, 2008 8:37 am

 

Hi Paul

Thanks for the info. icon_thumbsup2.gif Its looks very good. Who are the stockist in this country. Might also be good to have some in the shop.

Regards Peter

__________________________________________

Comment posted by PaulCheffus on Sun Jun 01, 2008 4:55 pm

 

trains12 wrote:

Hi Paul

Thanks for the info.
icon_thumbsup2.gif
Its looks very good. Who are the stockist in this country. Might also be good to have some in the shop.

Regards Peter

Hi Peter

 

I bought mine from Micro Mark in the States but I think Acme Model Co supply them in the UK.

 

Acme Model Co

PO Box 69

Hampton

Middlesex

TW12 3NA

 

0208 9790672

 

Cheers

 

Paul

__________________________________________

 

??? posted on Thu Jun 05, 2008 7:57 am

 

PaulCheffus wrote:

trains12 wrote:

Hi Paul

Thanks for the info.
icon_thumbsup2.gif
Its looks very good. Who are the stockist in this country. Might also be good to have some in the shop.

Regards Peter

Hi Peter

 

I bought mine from Micro Mark in the States but I think Acme Model Co supply them in the UK.

 

Acme Model Co

PO Box 69

Hampton

Middlesex

TW12 3NA

 

0208 9790672

 

Cheers

 

Paul

Hi Paul icon_biggrin.gif icon_biggrin.gif

Sorry not been back . line problems with BT. Thanks for the info will check it out.

cheers Peter

__________________________________________

 

??? posted on Fri Jun 06, 2008 9:03 am

 

Hi all

Just a quick update. Nearly all the basic scenic plastering has been completed and some of the basic painting has completed.

A departure from the building in situ for the scrubbers on the vertical lime kilns has been the arrval of one of Europes largest cranes icon_wow.gif that will lift the last scrubber into place. It takes a day to errect the crane on site. Will post some shots of this when the final lift is in place.

 

Wife sayes we are "Kids with Toys" icon_biggrin.gif icon_thumbsup2.gif

Peter

__________________________________________

 

??? posted on Fri Jun 06, 2008 1:07 pm

 

Hi All

Just arrived back from GTD and the crane has arrived and been set up for the final big lift tomorrow lifting the last scrubber in place. A couple of shots of the crane enclosed.

Some of the track has been sprayed inside the unit but nearly chocked us with the spray this will have to be done outside by dismantling the layout inside and errecting it outside. Will keep you posted.

 

regards Peter

 

file.php?id=17905

 

file.php?id=17904

 

__________________________________________

 

??? posted on Sat Jun 07, 2008 1:19 pm

 

Hi all

well I have final started to spay the track and here is the first shots of it. Other work that has been done has been the building of the two tunnel mouths wich are now on the paintind bench at home and will it is hoped be installed in the next few days. Also work on the main buildings is coming along but the other day ground the tip of my finger will the belt sander icon_eek.gif icon_frustrated.gif while thining some part down.Any way ashot of the back of the scubbers showing the piping coming out from the top of the klins.

The main new is that the large crane place the last scrubber in place so the klins can now be completed so some shots of this takeing place. And details needed due us a reply.

Cheers

Peter

 

file.php?id=17973

 

file.php?id=17972

 

file.php?id=17971

 

file.php?id=17970

 

file.php?id=17969

 

__________________________________________

Comment posted by Bangor Lad on Sat Jun 07, 2008 3:00 pm

 

Very impressive, Peter.

What paint did you use on the track?

BL

__________________________________________

 

??? posted on Sun Jun 08, 2008 9:27 am

 

Bangor Lad wrote:

Very impressive, Peter.

What paint did you use on the track?

BL

Hi Dave

Thanks for comments. The crane was a bit of fun icon_smile.gif icon_biggrin.gif

 

The track paint is Precision Paints Track Dirt (matt) sprayed with a touch up gun. Normally I would have sprayed the track before the scenics being done but on this layout many things have been done wrong way round. The problem is that you cannot get in with the gun as it is to large and causes over spray and uses to much paint. Need to get a new small one.

 

Peter

__________________________________________

Comment posted by MartinWales on Sun Jun 08, 2008 9:28 am

 

Looking good Pete! icon_thumbsup2.gif

__________________________________________

Comment posted by pharrc20 on Sun Jun 08, 2008 8:17 pm

 

It's coming along now, with the track being sprayed and some colour added to the cliff faces. Good to see that the curtain rail hooks solved the problem of the pipe bends on the limekilns pipework. Looking forward to seeing GTD in two weeks time icon_biggrin.gif

 

Cheers Paul

__________________________________________

Comment posted by Bangor Lad on Wed Jun 11, 2008 12:55 pm

 

trains12 wrote:

Bangor Lad wrote:

Lovely scrubbers Peter
icon_wink.gif

Not 100% sure of what you'r looking for in the mitre block. Have you tried an adjustable set square to mark out the angles?

BL

Hi Dave

Its not the actual marking out that is the problem but the cutting of them. One of the troubles that I have is that i have Arthritis in both my wrists
icon_mad.gif
and cutting down square with the saw is hard going for me so I use a X acto mitre block for the cutting of all my girder sections, tubes etc but they only have the 90 45 degrees on them so after I have marked say 35 degree angle with the protractor it is hard to cut it square.

Peter

Hi Peter,

I just came across this and thought it might fit the bill if you've not already got something.

 

Regards

D

__________________________________________

Comment posted by Bangor Lad on Wed Jun 11, 2008 1:00 pm

 

Sorry Peter,

 

Couldn't load the link. Will try again later.

 

D

__________________________________________

Comment posted by Bangor Lad on Wed Jun 11, 2008 9:33 pm

 

Bangor Lad wrote:

Sorry Peter,

 

Couldn't load the link. Will try again later.

 

D

Hi Peter,

Came across a multi-angle guillotine in the Proops Brothers e-Bay shop. Might be worth a look?

 

BL

__________________________________________

 

??? posted on Fri Jun 13, 2008 12:14 pm

 

D

Hi Peter,

Came across a multi-angle guillotine in the Proops Brothers e-Bay shop. Might be worth a look?

 

BL

Hi all

 

Dave thanks for the link am looking into it.

Update this wek is not to much work has been done due editing the HMRS Points newsletter. Anyway some more spraying of the track has been completed but my small spay gun is playing up so it is becoming very time consuming. Will have to get a new one. icon_evil.gif icon_evil.gif Work at home is still ongoing with the vertical lime kiln building but iit is nearing the stage for painting. Two shots posted showing my Fell Diesel outside the south box, This box will be replaced with a Midland style box when I have finished it.

Peter

 

file.php?id=18698

 

file.php?id=18697

 

__________________________________________

 

??? posted on Fri Jun 13, 2008 11:03 pm

 

Hi All

Well Friday 13th has lived up to its day with me. first this morning my trusted spary gun used on the track packs in and I cae home from the unit a bit Fed Up icon_rolleyes.gif So I decided to spray some of the lime kilns with my good air brush and guess what ? Yes you have it my good air brush has packed in still with alot of spraying to do. Mined you with hind sight I should have sprayed many of the items individually. Most remeber that in future. Dose any one else have problems like this. Anyway some shots of the spraying to date.

Peter

 

file.php?id=18770

 

file.php?id=18769

 

file.php?id=18768

 

__________________________________________

Comment posted by MartinWales on Sat Jun 14, 2008 9:02 am

 

So it was'nt just me that had a crap 13th then!

__________________________________________

Comment posted by BEN TRUCK on Sat Jun 14, 2008 9:20 am

 

Hi Peter

Yes , just when you thought you had all that spare time to paint and air brush it turns into "maintenance time", and nothing gets done .i think i,ve replaced nearly all the bolt on parts of my compressor over the last 4 years ,what was that in Fools and Horses ,"I,ve had this brush for 15 years ........5 heads and 8 handles, ................your structures are superb and stand up very well to close scrutiny ,where as mine ......................mmmm?

lovely stuff

cheers

Brian

__________________________________________

 

??? posted on Wed Jun 18, 2008 5:26 pm

 

BEN TRUCK wrote:

Hi Peter

Yes , just when you thought you had all that spare time to paint and air brush it turns into "maintenance time", and nothing gets done .i think i,ve replaced nearly all the bolt on parts of my compressor over the last 4 years ,what was that in Fools and Horses ,"I,ve had this brush for 15 years ........5 heads and 8 handles, ................your structures are superb and stand up very well to close scrutiny ,where as mine ......................mmmm?

lovely stuff

cheers

Brian

Hi Brian

Thanks for the comments. icon_thumbsup2.gif Gave up on the spraying and obtained a cheap and nasty ??????‚??3.99 air brush to finish track spraying. Did most of the job but a little over spray. One thing though I forgot to wear a mask and spent 4 hours in the unit with out realising the fumes and fog of the spraying was getting on my chest. Have spent today cutting out the windows in the South Works building back at the Centre so that the fog will clear in the unit. Will post some views of this when I have assembled it together tonight.

 

Regards Peter icon_biggrin.gif

__________________________________________

 

??? posted on Wed Jun 18, 2008 9:48 pm

 

Hi All

A bit of bad news went down to the unit tonight toget some items and found that the roof windows in the roof over the layout have leaked yet again with the heavy rain icon_eek.gif . The landlords have stated that they would be done but we are still waiting. At present the end board up of the fiddle yard is a little wet icon_evil.gif and a small amunt has gone on the front boards at the entrance to the main hopper yard icon_evil.gif Any way the whole layout is coverd in bin liners with some old empty ice cream tubs to catch the drips. just hope that it will be ok in the morning. Will keep you all posted.#

Peter

__________________________________________

 

??? posted on Thu Jun 19, 2008 1:20 pm

 

Hi all

Good news the layout has not suffor to much and is already drying out. icon_biggrin.gif Roof will be done next week at last. Anyway some shots of the south works building as promised and two shots of the painting of the scenery before the flocking stage.

 

Peter

 

file.php?id=19425

 

file.php?id=19424

 

file.php?id=19423

 

file.php?id=19422

 

__________________________________________

Comment posted by beast66606 on Thu Jun 19, 2008 1:57 pm

 

Looking good Peter, glad it wasn't damaged icon_thumbsup2.gif

__________________________________________

Comment posted by Bangor Lad on Fri Jun 20, 2008 11:05 am

 

Looking good, Peter. icon_thumbsup2.gif

I'll have to call in again some time soon...I could do with a tutorial on modelling the rockfaces!

 

BL

__________________________________________

Comment posted by saizei on Fri Jun 20, 2008 1:31 pm

 

everytime i look at this layout it gets better and better, keep it up look forward to seeing the end product

 

Thanks and Best

Gary

__________________________________________

Comment posted by garethevans1986 on Fri Jun 20, 2008 3:10 pm

 

I do agree, looks very nice, have you got a layout plan for it?

 

Any plans for running diesels on it? icon_biggrin.gif

 

GE

__________________________________________

0 Comments


Recommended Comments

There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...