Jump to content
 

Ian Simpson

3,459 views

blog-0723200001520942034.jpg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 In an earlier post on Bachmann's John Bull locomotive I described the difficulty of converting the high-sided shed covering the tender drive into any British-style tender. My own rather lazy approach was to adapt the existing body to resemble an early van (although goods vans were rare beasts in 1840; most early railways simply flung a tarpaulin over everything).

 

Nigel Hill has been rather more inventive, building a couple of very attractive replacement bodies. Both transform the tender drive into a useful piece of stock that looks great sitting behind non-motorised locos. He's kindly given me permission to describe his models here.

 

Removing Bachmann's own body from the chassis is a real puzzle until you know the trick. The front of the tender body has a gap in the green plastic just below roof level. On the left hand side of this gap you should be able to spot or feel a raised strip of metal that prevents the body sliding off the chassis. Simply insert a small screwdriver blade beneath the lip of the plastic and gently prise it over the metal strip. Once it is free of the metal, the tender body can be slid upwards off the chassis.
blogentry-1254-0-71435700-1520940134_thumb.jpg

 

blogentry-1254-0-45971100-1520940066_thumb.jpg

 

Nigel's first design is for an break van [the original spelling] made of plasticard. In 1840 most goods trains still ran without a brake van, which must have played a big part in the extraordinarily high levels of wear and tear reported by early wagon superintendents. But primitive brakes similar to Nigel's model were beginning to come into use as more powerful goods locomotives allowed freight trains to become faster and heavier.

 

blogentry-1254-0-97394700-1520940467_thumb.jpg

 

A particularly attractive feature of Nigel's model is the lantern lookout on top of the roof, made from transparent plastic. This model is still work in progress, and I think it will be wonderful when it's completed and painted out.

 

blogentry-1254-0-15532300-1520940539_thumb.jpg

 

The pipes loaded on the low-sided wagon in the photos below are Chris Cox's marvellous castings of the London and Croydon Railway's atmospheric tubes. Since the tubes were provided by contractors, they are very similar in appearance to the ones used on other atmospheric railways like the South Devon in the mid-1840s. Let's hope that this Company isn't planning to make a similarly expensive mistake ...

 

blogentry-1254-0-26364200-1520940592_thumb.jpg

 

Nigel's second model is based on a Great Northern Railway horsebox, although many other railways had very similar designs. It is also built of plasticard, this time with horizontally scribed planking. Nigel points out that while early prints often show a horse box and carriage wagon attached to the end of the train like an primitive version of Motorail, railways soon learned to move the horseboxes next to the loco to give their valuable occupants a smoother journey. That's useful, because a powered horsebox is definitely better sitting right behind the loco instead of pushing an entire passenger train.

 

blogentry-1254-0-61401300-1520939990_thumb.jpg

 

Because the horsebox towers over the Bachmann coach roofs, at first I though Nigel had built it in 4 mm scale rather than 3.5 mm! But when I checked the drawings I found he really had built it in HO: the prototype's roof was 11 feet above the rail tops, more than a foot higher than contemporary coach heights. Early coaches couldn't make full use of the loading gauge because of luggage stored on top of their roofs, oil lamp covers, even brakemen sitting on top of them.

 

blogentry-1254-0-39218700-1520940753_thumb.jpg

 

blogentry-1254-0-06115300-1520940686_thumb.jpg

 

And Nigel's primary interest isn't even early British railways - it's Scandinavian and especially Norwegian railways.

 

blogentry-1254-0-63713400-1520941382_thumb.jpg

 

blogentry-1254-0-12389700-1520940028_thumb.jpg

- Bachmann locos Nigel Hill brake van and goods train.jpg

  • Like 15

4 Comments


Recommended Comments

  • RMweb Gold

Thanks, Chris. It's great to write a blog when someone else has done all the hard work! And it is such a pleasure to showcase other people's work (especially when they are as nice as Nigel).

 

The two things that struck me when I looked at the photos on screen were (a) how much Nigel's models improve the scene, and (b) how wrong I was to think that a single coat of paint would be enough for the figures. I know people tended to patch up and mend their clothes much more in the 19th century, but some of those passengers look positively threadbare! I'd better build some Parliamentary coaches so they can afford to travel ...

Link to comment

I too have bought a John Bull. I painted mine in L&MR green/black livery. As for the tender, I was to lazy to buy the rocket one, so I chopped the top half of the “shed” off. This left me with a vaguely accurate tender outline, but still had the giant motor casting, which I covered in card, painted black, and then covered in coal dust. It looks okay from a distance, however it can give the impression that the fuel was squeezed to the exact dimensions of the tender out of an alien spaceship.

 

-Douglas

  • Like 1
Link to comment
  • RMweb Gold

That sounds a quick and clever workaround, Douglas. I'm looking forward to following your blog!

Wishing you happy modelling - and if I can help get you any info on the L&MR or early railways please ask!

(Libraries may be a problem for a few weeks! We're all in Covid-19 lock-down in the UK, so even lazy modellers like me are running out of reasons not to get something done. But leaving the house is seen as very bad form at the moment.)

Edited by Ian Simpson
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...