2018
Nearly 2 years have past since I started the plan to build a layout at our new home, initially I was to be banished to a large shed in the garden, however this evolved into part of an extension we decided to build. After a good start this time last year the builder became a bit erratic ending up with us parting, we then had to arrange for contractors to do the work beyond my capabilities. Most of the work was done by Christmas with a few bits to be completed at leasure, still I had my work shop/ railway room to fit out, then it was found out I had a medical issue which meant I could do nothing for 3 months, thankfully this has passed and all is OK now
This year I have joined a local model railway club, seemed to have been co opted on to the 0 gauge section and being a bit sidetracked with the senior gauge
What has happened, basically just a lot of thinking and acquiring items
Track
Well I was always going to build my own track, which was going to be to 00SF gauge, as most of the stock will be kitbuilt I decided to change to EM gauge, it does look better and the main cost will be Markit EM gauge axles
Secondly ditched the idea of using ply timbers, why? Well as the plain track will be flexi track with plastic bases it just seemed natural
Baseboards
Well I have a 12' run of kitchen base units plus an extra 2.5 foot available, at the moment this space is required for the skirting board painting for the other down stairs room, plus will temporarily be used for an 0 gauge test track. Once I get round to painting and fitting the skirting boards I can then start on the base boards
Buildings
I have started buying Ratio and Wills kits which will form the basis of the buildings as will be kit bashed as required
Stock
I have been having a major slim down of stock, but also been stocking up on locos and loco parts (mainly in the chassis department) as locos will be on etched chassis with can motors and High Level gearboxes. A nicely built K's Adams Radial tank is being converted (temporarily using the K's chassis) to EM and just got a slimline gearbox to fit it. Also just bought an unmade Southeastern Finecast Collet goods kit for £60 as I wanted the etched chassis, Gibson wheels and gears and Mashima motor, these parts alone would cost more than the £60 I paid
Also just bought an unmade K's 42/72xx kit (spot on for Bodmin) wondering if a 28xx chassis will fit it? otherwise a set of Gibson frames will be needed (at least I have a full st of Gibson wheels for it. Again £50 a good price
Hoping to start Bodmin in earnest in the autumn just because there is still lots to do with the house
- 1
1 Comment
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now