Jump to content
 

Clerestory Brake 3rd diag D14 Part 2


wenlock

1,880 views

I find it much easier to paint coach sides "in the flat" rather than when the coach is fully assembled.  This is obviously impossible with etched brass kits, soldering painted sides would be a challenge:), however with plastic kits it's not a problem.  The Slater's sides come in two halves which have to be joined, fortunately the Guard's ducket helps hide any join line.  I think it looks more realistic if coaches have a few windows open, so micro strip was used to represent the top of the droplights in the doors.

 

Sides joined and droplight height adjusted

IMG_2674a.jpg.efee6d95c612629bac8ad7e5acd236bf.jpg

 

The sides were then painted with gloss Phoenix Precision GWR coach cream https://www.phoenix-paints.co.uk/, using my airbush.  I used gloss paint, which once dry gives a hard smooth surface to apply the lining to.  Unfortunately the paint has dried with an "orange peel" finish, which hopefully won't be too apparent after a coat of satin varnish has been applied, once the coach is completed! 

 

Cream application

IMG_2688a.jpg.263f39748cd86f2aeb02b3843a116f0e.jpg

 

Once the cream paint had dried for a couple of days, low tack masking tape https://www.amazon.co.uk/FrogTape-Painters-Masking-Multisurface-41-1m/dp/B004QXKFBQ/ref=asc_df_B004QXKFBQ/?tag=googshopuk-21&linkCode=df0&hvadid=223237768057&hvpos=1o1&hvnetw=g&hvrand=6166215919130271044&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9045352&hvtargid=pla-357994525169&psc=1&th=1&psc=1  was applied on top of the raised panel beading.

 

Masking tape in position

IMG_2692a.jpg.0dc87305cbb0f099e5c7fc652e9e65cf.jpg

 

Phoenix Precision GWR coach brown was then applied to the sides, once again using my airbrush.  The join between the cream and brown paint occurs on the raised moulding, which will be painted black later, so consequently doesn't need to be perfectly straight :)

 

Brown Application

IMG_2701a.jpg.274289187571e634a3efd2886995f3a6.jpg

 

The bolections and droplights were then brush painted using Phoenix Precision Indian Red.

 

Indian Red

IMG_2730a.jpg.27b16ab6bcf727201d9212d25b880d50.jpg

 

The raised panel moulding was then painted black using a fine tipped brush, fortunately the junction between the black and the body colour will be hidden by the lining.

 

Black panel moulding

IMG_2740a.jpg.7d81708179e5a15344b5a683339b77d4.jpg

 

The next stage of the process is to apply the lining and for this I use a Bob Moore lining pen. https://www.phoenix-paints.co.uk/products/lining-and-sundries/moore The pen comprises of a handle, paint reservoir and fine needle like tubes of assorted diameters.  I've got the Craftsman Plus set, which includes 3 different heads, one each of 0.008” Fine, 0.012”Standard & 0.020” Standard Plus Heads

I've found that In order to get a successful result using these pens two things must be right.  The paint consistency must be correct, so that it flows properly and the pen must be held at the right angle.  A bit of practice is useful on a scrap of plasticard and is useful to check that the paint is flowing adequately before applying it to the model!

 

Bob Moore lining pen

IMG_2790a.jpg.810c51c2011e5cb5f4ef4161be09e5dc.jpg

 

I start the lining by going around each of the cream panels with brown paint using the "Standard Plus Head" giving a line about 0.5 mm wide.

 

Brown lining

IMG_2747a.jpg.450f12c2b4c8862374655ccad8a3fcc0.jpg

 

Once the brown lining is dry, I go around each panel again but this time using gold paint applied using the "Standard Head" which gives a line about 0.3 mm wide.  This means that each cream panel is edged in a 0.3 mm gold line, which is then edged with a 0.2 mm brown line.

 

The brown panels are simply lined with gold paint using the "Standard Head" giving a 0.3 mm line.

 

Gold Lining applied

IMG_2752a.jpg.aafa4a735a366089a7a2b30884bb8ad3.jpg

 

Lettering was applied using CPL products https://www.cplproducts.net/transfers.html ,along with numbering using transfers from HMRS https://hmrs.org.uk/transfers.html

 

Lettering & Numbering

IMG_2789a.jpg.f403451bdbb63a02aaeb1566f5500864.jpg

 

IMG_2782a.jpg.75d8dee22b5ccc4b59903b5fbda2803b.jpg

 

The sides now need the application of some clear satin varnish to protect the transfers and to tone down the high gloss finish, but I'll probably do this once the coach has been further assembled onto it's under frame and ends which will have to wait until the next bog entry:)

 

All in all a rather long winded process which makes the advent of Slater's pre-printed sides look very attractive, although there is some satisfaction in having a go yourself!

 

Until next time ......

 

Best wishes

 

Dave

 

  • Like 14
  • Craftsmanship/clever 21

22 Comments


Recommended Comments

  • RMweb Premium

I use a black laundry marker for the mouldings,  as when I used a brush and paint the result was rubbish and I stripped it all off and started again.

 

 

  • Like 1
  • Informative/Useful 1
  • Craftsmanship/clever 1
Link to comment
  • RMweb Gold
1 hour ago, Siberian Snooper said:

I use a black laundry marker for the mouldings,  as when I used a brush and paint the result was rubbish and I stripped it all off and started again.

 

 

That's a good idea, glad it worked out well for you:)

Link to comment
  • RMweb Gold

I now understand why the GWR lined their stock. It was all a ploy to hide that they couldn't paint their choc and cream straight! :jester:

 

Only joking Dave, those sides are superb. Also very useful to see the Bob Moore lining pen in close-up. It must require quite some skill to apply it as neatly as you have done.  Can I ask what airbrush you use?

Link to comment
  • RMweb Gold
10 minutes ago, Mikkel said:

I now understand why the GWR lined their stock. It was all a ploy to hide that they couldn't paint their choc and cream straight! :jester:

Lol!

 

13 minutes ago, Mikkel said:

Only joking Dave, those sides are superb. Also very useful to see the Bob Moore lining pen in close-up. It must require quite some skill to apply it as neatly as you have done.  Can I ask what airbrush you use?

 

Thanks Mikkel,

 

I find painting coaches one of the the more challenging aspects of modelling the Edwardian Great Western, so I'm really pleased you think they look OK. :)

 

The Bob Moore pen does take a bit of practice to get the hang of, but the addition of a couple of drips of cigarette lighter fluid helps the paint to flow easily without thinning it too much.  The raised moulding on the coach sides really helps to keep the pen in position on the coach sides, I've had much less success lining flat surfaces :rolleyes:

 

I use an Iwata revolution airbrush and smart jet compressor like this onehttps://www.ebay.co.uk/itm/Iwata-Modeller-airbrush-kit-with-Smart-Jet-compressor-Brand-New-Never-Been-Used/163805690672?hash=item2623947b30:g:sZQAAOSw-xhdSIL3

 

It's a really good set up, limited only by my ability! 

 

Best wishes

 

Dave

 

 

  • Informative/Useful 1
Link to comment
  • RMweb Gold

Thanks Dave, the Iwata does seem to be widely recommended. And the compressor is not as bulky as a I thought.

Link to comment

Beautiful work.  The full lining of a GWR carriage is a real challenge but very fine when done well, as here :)

Link to comment
  • RMweb Gold
53 minutes ago, MikeOxon said:

Beautiful work.  The full lining of a GWR carriage is a real challenge but very fine when done well, as here :)

Thanks Mike!

Link to comment

Dave,

Wonderful work.  Can’t wait to see the finished coach being pulled into Sheraton, maybe by a River class!

 

BTW, I’ve a load of 4mm coach sides that will need lining if you feel you’re not getting enough practice...

 

Duncan

  • Like 1
Link to comment

NB I’m still waiting to get my hands on a 4mm Ricer class.  Been promised one is possibly en route, but....

D

Link to comment

I suppose it’s long winded due to having to wait for the next bog entry...?!

 

A fascinating read as usual. I was idly thinking myself about getting one of these pens - yet again Dave you are leading me astray!

Link to comment
  • RMweb Gold
2 hours ago, drduncan said:

Dave,

Wonderful work.  

Thanks Duncan.

 

2 hours ago, drduncan said:

 Can’t wait to see the finished coach being pulled into Sheraton, maybe by a River class!

Nor can I:)  Yes the River class pulling a rake of bogie clerestories and maybe a couple of six wheelers into Sherton Abbas is definitely the plan, just not sure quite how long it will take me!

 

2 hours ago, drduncan said:

BTW, I’ve a load of 4mm coach sides that will need lining if you feel you’re not getting enough practice...

A very kind offer, but I think I'll pass:D  I tried lining 4 mm coaches about 20 years ago , Its one of the reasons I decided to change to 7 mm!

 

2 hours ago, drduncan said:

NB I’m still waiting to get my hands on a 4mm Ricer class.  Been promised one is possibly en route, but....

D

Excellent news!  I hope the River finds it's way to you very soon:)  I'm sure a certain Iain would be very interested in the "Ricer" class:D

Link to comment
  • RMweb Gold
2 hours ago, Tricky said:

I suppose it’s long winded due to having to wait for the next bog entry...?!

Lol! I hadn't noticed that:)  Certainly a lot of hot air!

 

2 hours ago, Tricky said:

A fascinating read as usual. I was idly thinking myself about getting one of these pens - yet again Dave you are leading me astray!

Glad you found it useful:) The pens are very good once you get the hang of them, but are a bit technique sensitive at first use.  its important that the needle applicator is kept more or less at 90 degrees to the work, so the paint flows evenly.  When I first bought mine I tried to use it angled like a pen and got nowhere and was initially a bit disappointed with it:rolleyes:

 

I'm delighted to be continuing to lead you astray If it means we get to read about your next projects!  

Link to comment
1 hour ago, wenlock said:

Lol! I hadn't noticed that:)  Certainly a lot of hot air!

 

Glad you found it useful:) The pens are very good once you get the hang of them, but are a bit technique sensitive at first use.  its important that the needle applicator is kept more or less at 90 degrees to the work, so the paint flows evenly.  When I first bought mine I tried to use it angled like a pen and got nowhere and was initially a bit disappointed with it:rolleyes:

 

I'm delighted to be continuing to lead you astray If it means we get to read about your next projects!  

I used to use Rotring drawing pens in a previous life before the advent of Autocad so I imagine I will get on with them, as I think they operate in a similar fashion. 

Link to comment
  • RMweb Gold
12 minutes ago, Tricky said:

I used to use Rotring drawing pens in a previous life before the advent of Autocad so I imagine I will get on with them, as I think they operate in a similar fashion. 

Yes with that background you'll have no problems at all, I shall expect great things!:)

Link to comment
  • RMweb Gold

Hi Dave, good to see you at the weekend. With the lighter fluid, do you use a particular brand? I seem to remember being told that only Ronson fluid works, which might be why I didn't have much joy using the Swan fluid I was able to buy locally. 

 

I also wasn't sure whether you're meant to use the fluid in the paint jar, or just in the reservoir of the pen.

Link to comment
  • RMweb Gold
2 hours ago, Job's Modelling said:

Nice work. Looking forward to your next entry.

Thanks Job:)

Link to comment
  • RMweb Gold
35 minutes ago, Barry Ten said:

Hi Dave, good to see you at the weekend. With the lighter fluid, do you use a particular brand? I seem to remember being told that only Ronson fluid works, which might be why I didn't have much joy using the Swan fluid I was able to buy locally. 

Hi Al, yes good to see you too:)  The bottle of lighter fluid i'm using is indeed Ronson, I didn't know other brands weren't suitable, in that case mine was just a lucky purchase from the local newsagents!

 

IMG_2792.JPG.a49c88e270baa2bc5542f2c5264efae4.JPG

 

44 minutes ago, Barry Ten said:

I also wasn't sure whether you're meant to use the fluid in the paint jar, or just in the reservoir of the pen.

I just put a couple of drips of lighter fluid in the pen reservoir on top of the paint and wiggle a cocktail stick about to mix it.  If the paint is too dilute it tends to bleed across the surface of the model, rather than staying as a crisp line.

 

Looking forward to a good weekend at Telford for Guildex:)

  • Like 1
Link to comment
  • RMweb Gold
2 hours ago, Charlie586 said:

You've done fantastic work on the sides, they look great.

Thanks Charlie!:)

Link to comment
  • RMweb Gold
On 21/01/2020 at 15:38, Coal Tank said:

Hi ya is this a mixture of kits or one of slaters

John 

Sorry John, I've only just noticed your question:rolleyes:  It's a Slaters kit. 7C015 GWR 50'Clerestory Bogie Coach Brake Third (Diagram D14)

  • Like 1
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...