Work on the Board 1 Corner begins
Entry posted by Leith Centrl
176 views
Over the past week i have been working on the back corner of board one getting the backscene prep done between the end of the board and the start of the station roof.
Jobs Done/Process:
1, Fit blue sky background: Printed on ink jet and glued to Backscene board with PVA using a card off cut to smooth out any air bubbles and ridges.
2, Mounted ID Backscenes BM110 parts on 2mm card to give some relief off the backscene. These are self adhesive and go on really well if you take a bit of care. Great product both in look and timesaving.
3, Fitted troughing route and Location boxes along edge of the cork using wood glue
4, Ballasted the end of platform 3, 4 and 5
5, Fitted and painted edgings to the bridge footing. (Please see the previous blog entry for how I do this) THIS AREA IS GIVEN AN ADDED LAYER OF DARK GREY PRIMER TO DARKEN THE COATS DOWN SLIGHTLY
6, Cut the Card base mock up for the retaining wall section from 2mm card to test fit.
The Bridge is from KS Laser Designs. A really nice kit that i will cover in full in the next update from building, through detailing and painting
Link to The Bridge: https://kslaserdesigns.com/OO-scale/OO-scale-bridges/oo-scale-iron-bridge
Away from the main video ive also been slowly chipping away at the station building scale drawings and paving in between other jobs. The Blank Paper to Building will feature in a future update at some point.
Most of all at the moment I hope you are all keeping safe indoors and enjoying some modelling.
-
2
-
1
1 Comment
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now