Future project?
Having run out of steam getting the Black 5 chassis painted and not sure how to proceed with the Ivatt tank, I thought I might do some planning (scheming) and some preliminary work on a future project - a Brassmasters Re-built Royal Scot.
To add interest and a bit of a challenge, I decided to fit the model with working inside valve gear. The kit provides most of the prototypical frame stretchers but makes no provision for the inside cylinder or valve gear. My representation is not going to be exactly to scale but should be a fair representation using as many spare etched and other parts from various kits and left-overs, modified to represent the Scot parts as near as practicable.
Here are a few photos showing progress to date.
Frame plate marked out for inside cylinder
Inside cylinder laid roughly in position.
Inside cylinder with front section of valve gear in position.
Rear portion of valve gear, temporarily inserted into the mounting bracket, which will be attached to the rear face of the (kit) motion plate.
Connecting rod fixed to the cross head and located in the cylinder. Again, front portion of valve gear attached.
Dave.
- 6
- 1
- 3
3 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now