I replaced the filter on my spray booth.    Lucked out at a Menard's (sort of a big Halfords, I suppose.)  Not only did they have respirator filters in stock, they also had furnace filter material in a roll!   A few strokes of a box knife later, I had new filters. 

With my booth operational again, I sprayed the balance of the Kaempfer body in gloss white;

I suppose this was technically 'Classic White.'  I had no plain gloss white on hand.   The old Boyd Hi Gloss white had solidified when I opened it.   Not a perfect job.   The second cup of paint started spitting on my.   I think I had some drying in the brush.   Had to pull the thing down to components to clean it.   I don't think I fully cleaned it, either.   I've mistreated the old thing.   My fault, sadly.   I think, when Badger does their 'birthday' specials again, I'll pick one of those up.

I finished building the Heavy Gundam I was building for a friend.    I have all the foil stickers applied, so I decided to apply a couple of coats of gloss for waterslides;

I don't think it was perfect.   I'll let it sit for a day or two, see if it settles.    Humbrol Gloss Varnish, in case there's anything I should know.    When I come back to it, I'll start adding the markings.   We'll see.