16mm photo-plank - Keep warm by the stove and enjoy your vices
A few more printing projects over the last week. I found some nice pictures on the internet of the same sort of tortoise stove I'd seen at Thelkeld. The hardest bit to model up was the 'Celtic rope' design around the top, mind you I'm not sure drawing tortoises is my strong suite. The text around the top is tiny, the letters are .8mm tall and are have .25mm of relief. That they are visible once printed is nothing short of miraculous. I couldn't actually make out the text on the raw print and it only really became visible after painting and dry brushing.
Owing to my stupidity with the support structure the flue didn't come out but I can add it with a piece of Plastruct tube. I'll probably have another go. Still, the occupants of my shed will now be able to keep warm and make some tea. For reference this stove is 36mm tall by 20mm in diameter.
At the same time I printed a machinist vice for the pillar drill.
While on the printer I also made a load of G-Clamps, as you know you can never have too many G-Clamps. I modeled one and adjusted the size by 10% up and down to give some different sizes. You can't quite make out the 'Made in England' legend but you can just make out there is something there.
Finally I got a bit silly with the hand tools. The planes were based on a page from a Stanley catalogue I found online, the adze from a picture from my friend Alan who will be getting a few more tools in the post. The planes vary from 12 to 16mm (scale 9" to 12"). The adze has a scale 3' long handle.
The garage has got too cold for printing now, the resin going extremely gloopy at low temperatures. Fortunately I was able to set the printer up inside and I tried the technology outlet's Premium Low Odour resin. I guess 'Low Odour' is a relative term but at least it didn't stink the house out.
I've got some sculptamold on the Stour valley castle mount now. It looks ok but doesn't photograph too well in its white state. I'll post some pictures once it gets some brown undercoat on it.
David
Edited by Fen End Pit
restoring photos
- 9
- 8
- 1
3 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now