Jump to content
 
  • entries
    140
  • comments
    952
  • views
    147,540

Recent work - wagons and weathering


Captain Kernow

1,049 views

Recent work includes the completion of four Cambrian 'Herring' ballast hoppers in P4, which will be used on 'Callow Lane' (and in due course, my planned Forest of Dean cameo layout) and also on Re6/6's 'Parkend Marsh Sidings' layout:

 

20210201_202614.jpg.45b5028cf92b53b2bc1fde1a28c55b82.jpg

 

20210201_202633.jpg.272c682548b02349f4ae1b3095b6472c.jpg

 

20210201_202710.jpg.4625960bffa8bdaeb1aa8748a94e6d8e.jpg

Here are the four Herring so far completed. All are unsprung and uncompensated, having established (prior to recent lockdowns) that this format runs OK on Re6/6's Marsh Sidings layout.

 

As 'Callow Lane' isn't set up at the moment and as I can't visit Re6/6 to pose them on 'Marsh Sidings' either, here they are precariously balanced on my OO layout 'Bethesda Sidings':

20210201_203630.jpg.00b93b12f93e7010f22b295a3db402c3.jpg

 

The part-loads visible in one of the above photos hide the fact that there is a quantity of liquid lead in the bottom of the hoppers of each wagon. There really isn't anywhere else on these wagons to put sufficient weight, in order to aid road-holding in P4. Without it, they would just be too lightweight and would probably keep derailing. I wouldn't even run such lightweight wagons in OO, to be honest. The two left hand wagons have removable 'full loads' of Whitecliff Quarry ballast and the two on the right will be similarly fitted in due course. Each wagon now averages 45 grams.

 

I've also built a Chivers 'Ling', also in P4 and also not compensated or sprung, but also with a decent amount of weight underneath.

20210201_202520.jpg.cf038df2ffd52a57caa5a2912a271a25.jpg

 

20210201_202538.jpg.5cab6e58433aa00aea51befabf5f1895.jpg

 

20210201_202544.jpg.05fce80781582136268f8f215f6fb0ef.jpg

 

Also posed on 'Bethesda Sidings':

20210201_203227.jpg.909db8e0161cea7625f9be443e83da8b.jpg

 

Also converted to P4 recently is this Hornby 'Toad'. Apart from a small amount of plastic that needs to be removed from the brake gear assemblies on each wheel, it was a pretty straightforward conversion, although I've also done this one rigid. A hole was also cut in the floor of the van area and a decent amount of lead glued inside, to bring the weight up to 50 grams. It's still awaiting weathering at the moment:

20201213_133820.jpg.003394d36b4926aab3732feb082379e9.jpg

 

20201213_140750.jpg.2c2f2a36a9fdd899231b921e720d517b.jpg

 

20201212_212101.jpg.ac36a5a27c8d09f2b383a19cd22dcd5c.jpg

 

Since the above photo was taken, the brake van has been re-lettered (using Cambridge Custom Transfers excellent product) to a Lydney van.

 

Whilst I had the transfers and weathering powders out, I also lettered and weathered a couple of OO Grampuses and an old ex-GW 3-plank wagon (all built many, many years ago):

20210125_145859.jpg.1147ff18cc84d9f8b01a81fd1dbbb09f.jpg

 

20210125_150108.jpg.a2be9836bb60be872961d5105e359153.jpg

 

20210125_150251.jpg.e1ba504b4d123c99575ac7d2286c48b0.jpg

 

Finally, I've recently had four P4 converted diesels back from Tom Foster, who has done an utterly brilliant job weathering them for me. Here they are, again posed precariously on 'Bethesda Sidings':

20210201_204405.jpg.813d147df09f854b25a513a3030ca6b0.jpg

 

20210201_204744.jpg.d18f9260fb038a5f42db1ce4bab479e7.jpg

 

20210201_204947.jpg.5d9f37c6e5e3740041689ad2acf0967f.jpg

 

20210201_205236.jpg.d7af6426a516022f7a19e65158dc365f.jpg

 

All the diesels will be used on 'Callow Lane' in due course.

 

Edited by Captain Kernow

  • Like 17
  • Craftsmanship/clever 7

13 Comments


Recommended Comments

  • RMweb Gold

You've made a superb job of that ballast wagon Tim.:dance_mini: Can I ask your source of transfers for it please.

Link to comment
  • RMweb Gold
1 hour ago, gwrrob said:

You've made a superb job of that ballast wagon Tim.:dance_mini: Can I ask your source of transfers for it please.

I can’t answer for which ones Tim has used Rob, but I can definitely recommend the Cambridge Custom Transfers pack intended for Cambrian kits.  They are ready to use for the Cambrian ‘starfish’ and can be adapted for use on the Chilvers Tunney (or for that matter on a Grampus back dated to the close GW design)

 

 

really like those finished Herring, must resist buying even more PWay stock......

Edited by The Fatadder
  • Thanks 1
Link to comment
3 minutes ago, The Fatadder said:

I can’t answer for which ones Tim has used Rob, but I can definitely recommend the Cambridge Custom Transfers pack intended for Cambrian kits.  They are ready to use for the Cambrian ‘starfish’ and can be adapted for use on the Chilvers Tunney (or for that matter on a Grampus back dated to the close GW design)

 

 

really like those finished Herring, must resist buying even more PWay stock......

 

There shouldn't be any need to adapt my transfers for Chivers kits - I list dedicated sheets for the BR steam era models.

 

Regards,

John Isherwood,

https://www.cctrans.org.uk/products.htm

  • Agree 1
Link to comment
  • RMweb Gold

Just to confirm what John Isherwood has said. I used CCT transfers, exactly as supplied on the sheet. He does a vast range.

 

Link to comment
  • RMweb Gold
1 hour ago, cctransuk said:

 

There shouldn't be any need to adapt my transfers for Chivers kits - I list dedicated sheets for the BR steam era models.

 

Regards,

John Isherwood,

https://www.cctrans.org.uk/products.htm

Knowing that Rob’s main modelling is pre-nationalisation, I think I am right in saying that the only way to get transfers for the GWR liveried version of the Tunny, was by adapting transfers on your sheet C89.  I unless I missed another departmental pack in GWR livery.   Either way they give fantastic results!

Link to comment
9 hours ago, The Fatadder said:

Knowing that Rob’s main modelling is pre-nationalisation, I think I am right in saying that the only way to get transfers for the GWR liveried version of the Tunny, was by adapting transfers on your sheet C89.  I unless I missed another departmental pack in GWR livery.   Either way they give fantastic results!

 

Sorry - didn't know we were talking pre-Nationalisation; my Sheet C89 contains many useful GWR departmental lettering elements.

 

Regards,

John Isherwood.

Edited by cctransuk
  • Agree 1
Link to comment
  • RMweb Gold

Tim I forgot to ask, what powders did you use on the Grampus?  Looks very convincing (and my departmental wagons are looking far too clean!)

Link to comment
  • RMweb Gold
28 minutes ago, The Fatadder said:

Tim I forgot to ask, what powders did you use on the Grampus?  Looks very convincing (and my departmental wagons are looking far too clean!)

A mix of Mig and Abteilung 502, Rich. They are excellent to work with.

 

Edited by Captain Kernow
  • Agree 2
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...