Jump to content
 
  • entries
    26
  • comments
    100
  • views
    28,479

Steadfast

2,240 views

Well, yet again, I start by realising how long ago it was I last updated the blog. Come to think of it, how long ago it was I last did some proper modelling!

At Warley I picked up a Kibri kit for a rail crane. Although not a design in use in the UK, it's similar to the large Kirow cranes in use on engineering work over here. It is an expensive kit (the £29.95 I paid was a knock down price, some websites list it at up to US$130!!!) but does go together well. I plan to paint it up in Grant Rail orange and blue - was in Hobbycraft the other day comparing a photo on the internet on my phone with the Tamiya colour rack!

blogentry-6899-126766169179_thumb.jpg

Here is the support wagon - these size cranes seem to run with anywhere between one and four support wagons, depending on the individual crane. This is a Farish Freightliner flat, modified with some Evergreen I-beam to create the side rails and buffer beams. The over hang is meant to be some kind of step over the buffers - may fit a TPM etched ferry walkway on here if I can find them in my boxes of bits. The I-beam has had the inside projection removed on the lower edge because otherwise it clashed with the angled bars on the underframe. The small ladder was soldered up from wire, and the one up the side of the mess and stores container is N Brass signal ladder soldered to a piece of wire to mount it. I mounted the hadbrake wheels by cutting a length of wire the width of the wagon, soldering a hand wheel to each end and after it's glued into a groove under the wagon, bent to shape to the right height. Can you tell I've been practising with the soldering iron recently? wink.gif

The spreader beam sat on the wagon is simply a piece of I-beam, with the ends cut to 45 degrees and several holes drilled through. It should look a bit more separaate from the deck once it's painted

blogentry-6899-126766170657_thumb.jpg

blogentry-6899-126766172485_thumb.jpg

This isn't strictly an update from the kitchen table either, since the table is currently in the living room while the new kitchen is fitted! Once it is, and the garage is clear of cupboards and white goods, I'll whack a coat of primer on the whole setup, and the 59 underframe

'til the next time

jo

3 Comments


Recommended Comments

That's definitely going to look the part when painted up :) Are you going to get some custom transfers made up?

Link to comment

I certainly hope it will look the part James! Yeah I'm going to do the transfers, I need to get in touch with the guy who's printed some ALPS stuff for me in the past to check the details of artwork to print white and black. I've got a sheet of artwork that keeps growing (Yeoman logos for the 59 etc) so I can add these to that hopefully

 

 

Link to comment

that's a very interesting crane...

 

 

Does it's 4 axled bogies cause any problems on taking out-of-scale set-track curves?

 

I only ask incase i run into a reduced price model....because the current asking price is a wee bit much ;)

Paul

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...