Hello.
I thought I would record what has happened today as it once again didnt go exactly according to plan...
What was supposed to be a quick couple of hours job to wire up the station lights on the goods shed end of the platform kind of turned into something that still hasnt quite been finished off....
The first thing is the original holes I drilled in the platform came through the underside of the baseboard directly onto one of the supports for the legs so I couldnt get near it to fit the socket for the lights! The only solution to this was to redrill the holes slightly to one side which I promptly did. Secondly I went to install the light sockets I made a while ago and couldnt find one of them anywhere! The only option was to make another one which I did and finally installed them both. Then there was the light for the goods shed which needed wiring up (as I was under the baseboards anyway) so I wired in the socket, plugged the goods shed in, then promptly blew up the LED in the shed! I found out that I wired it into the 12v supply instead of the 3v one!! The only solution was to take the roof off the shed (which was glued on!) and replace the LED which I did. Finally one of my station lights stopped working earlier and after a bit of investigation found out that the bulb had blown, this of course meant that I had to remove the brass fittings on the bulb and glue them onto another bulb which is as far as I have got so far.
So there you have my day today! The thing is now its dark enough to take some nightime photos of the layout...
Looking at my layout in the dark tonight has made me realise that it is all worth it...
Missy
- 8
9 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now