"Budget" Rail Head Treatment Train RHTT with Hornby Railroad
Entry posted by GraemeWatson
3,989 views
Living next to the East Coast Mainline, the Autumn RHTT is a welcome site, and often an excuse for the use of #ClassicTraction on the Great British Mainline.
After encouragement from RMweb member, friend and fellow photographer, JaymzHatstand, I have decided to post progress on my "budget" RHTT made with Hornby Railroad items, some old spare bits, and scratchbuilding.
He directed me to the RMweb article 00 RHTT KIT, which details construction of a more prototypical set of RHTT units, with a cost that may be off-putting to the modeller on a budget.
Detail fiends beware!
My budget attempt may not satisfy you, but it is an easy and cheap way to add a decent
RHTT to your OO or HO programming. The model is based on re-painting "near enough"
cheap models, to a similar "style" of the real thing.
>Think of it as the "Blue Peter" Thunderbirds Tracey Island; ideal if you can't splash out on
the resin kits, or have stuff lying around that can be utilised.
Before you start
Read through the whole method; adapt as required
Work safely with sharp tools
Time to complete
A good 6-8 hours on the trot, or two nights.
Rough Cost: £30-40 (or cheaper if you have old TTAs)
Things you will need:
Three "Hornby Railroad" TTA wagons: The "Fuel Pack" will suffice
~£10-12 from your local model shop
Two "Hornby Railroad" container bogie wagons.
~£10 each
Paint, and some brushes (Variable cost).
I used "DecoArt" crafter's acrylic: £1.30 for a (59ml bottle)
Colour: Coastal Blue. (This was left over from a non model rail project)
Preparation of Two Hornby Railroad Container flats
You need two container flats. Remove the IBC and UBC containers.
The IBC/UBC containers are kept stable on the flats with rounded pegs;
these stop the containers sliding off.
I filed these off, to accomodate the TTAs later.
I have added the now spare containers to my TMD-style layout as "furniture", and use them to
keep "useful" bits in; after all they have secure doors!
Preparation of TTA wagons:
Remove the ladders from the ends of the TTA wagons. To my surprise, these were metal.
Be careful when "levering" them off; you may crack the legs they attach to on the TTA wagon.
(Use "superglue remover" if you have any, or just be careful)
TOP TIP: These ladders can be re-bent, cut or straightened, to use the basis of ladders for a Class 08 shunter,
or side ladders for a Class 20 diesel: Very useful!
Remove the gantry work from the top of the wagon; this should just unclip out.
Painting the TTAs
I used "Crafters Acrylic" Coastal Blue, direct from the bottle, three coats, for the wagons.
I used "Crafters Acrylic" Slate Grey, to paint the roof gantries; three coats.
Making the generators, vents and personnel unit
Using the space remaining on the container flat as a guide and photos of the prototype,
I scratchbuilt the generators, ventilation units and personnel unit. This was done using
cardboard, and conveniently some corrugated card from a box left over from Christmas.
(Though I could indeed have used plasticard, I had none)
See the pictures for a rough idea, but essentially it was simply made using rectangular shapes.
I did not use "tabs" on the edge of each part of the construcion, but elected to glue it with some
heavy duty multi-purpose Bostik glue in my hands, until it set.
(Beware: Fingers may get sticky, so don't sue me! Use a better method if you want!)
Making the railings
The handrails were left over from the construction of a PECO diesel shed, and painted slate grey.
Perfect.
Assembling the unit
I assembled my TTAs and other units on the two container flats, as shown, using double sided
tape, on the bottom of the units (this is very secure, and allows me to return them
to bulk container use if I wish)
This was based somewhat on personal preference, and reference to photos of the prototype.
Still to do:
Apply Network Rail transfers (printing your own waterslide transfers is cheaper using graphics available online)
Apply orange stripe around the TTAs.
Apply weathering, as required.
Potential problems
The Hornby Railroad Container Flats have old-style couplings, that cannot be changed to the newer "slimline" NEM type.
The standard compatibility issues with tight curves and mis-matched loco couplings applies.
Progress so far:
-
3
2 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now