Jump to content
 

BigDee

RMweb Gold
  • Posts

    110
  • Joined

  • Last visited

Everything posted by BigDee

  1. Well these have turned up today. Wow on initial inspection these look great, well worth the long wait👍
  2. Another great Scottish exhibition, well worth a visit from south of the border. Superb selection of layouts, trade support in a great venue.
  3. Unfortunately can’t make it this year! Well worth a visit even from Lancashire, great exhibition and venue.
  4. Yes all my 37/6s are quieter than 37/4s but all have the master volume is set to 192. Is it possible that the master recording was set to a lower volume level before loading to the decoder? Plus the loco sets off then releases the handbrake on all 37/6 locos!
  5. You’ll need a larger house to fit the more boxes in!
  6. Hi Steve, Thank you for the reply, I have Lokprogrammer. Find it strange that other AS37s I have don’t do this but the latest does🤔 Cheers D
  7. Can’t remember, if there is a fix for not moving until step eight with sound on. With no sound on moves off on step one? This is with 97301 factory sound fitted.
  8. Same here, and DPD confirmation, looking forward to receiving this one.
  9. Sorry Eric, missed the notification for this. Running 4.2.10. firmware. So like you say will have to wait, I think ESU forget sometimes they are German and should be efficient 🤣 I’ll have a play on lok-Progammer 👍 Cheers D
  10. Mine arrived this afternoon, quick check and test before carefully re-wrapped and packing away. To find the lights still on after a few minutes is something else👌
  11. Any chance you can release the remaining stock in an evening or first thing in the morning? Rather than mid morning, taking days off work to buy trains is starting to effect my workflow 🤣
  12. Cheers fella, In a hotel room currently, I’ll take a look later in the week and let you know 👍
  13. Not sure if this is the best thread, any help would be appreciated. ECoS not seeing V5 sound decoder reads as Generic NMRA on my controller as per the photo below. ECoS is using the latest firmware. I turned off railcom/railcom plus to stop CS MK5 coaches buzzing and have turned it back on but still doesn’t allow you to see the advanced menu settings and is still showing Generic NMRA and not ESU V5 even after a re-reading the decoder. Do I need to delete the locos from the system which are affecting? Reset the ECoS?
  14. Thank you for the replies guys. I’m running the latest firmware and it’s been fine till this weekend. Think I may have altered something within the settings mid week, not sure what! I’ll ask on the ECoS thread and the ESU forum too. If no joy a system reset!
  15. @Dicky L did you get to the bottom of this? I have the same issue, started yesterday for me out the blue!
  16. This arrived yesterday from Rails, forgot I’d ordered it…
  17. 66080 stands silent at a very quiet Peak Forest Sunday 9/10/22
  18. Many thanks P. The 1mm masking tape was just too wide and not pliable enough for securing to the anchor points, whereas the non-waxed mint flavoured dental floss tape worked a treat. Picked mine up from Tesco’s 50m should last a lifetime… HTH Cheers Daz
  19. Lady Di arrived Saturday, cracking loco.
  20. Mine are ready to enter service. Thanks again guys for producing these wonderful wagons.
  21. The hired in shunter could do with a good clean…
×
×
  • Create New...