xm607

Has any one used the Gaugemaster Auto Train Control module SS3 , comments, etc? Steve.

Does any one know if the 3D "Parrot wagon" is still available? Steve.

Your Fell is looking good, I see you have the body side tumblehome as well, I had to introduce that to the 7mm A1 models Fell, its a very subtle blend of curves and straight bits!!!!!!! Steve.

The Idleford Town video is here, Fell is 3.40 in, also look for a North Eastern EE1 in BR early blue built from a Judith Edge etch, The Fell body windows were changed to a grill each side when the extra cooling slats were added to the on the nose sides, the A1 etch has a window on one side and grill on the other, the locomotive went through a lot of changes to the body through its life, including the removal of the centre coupling rod to ease the strain on the gearbox. When I built an N Gauge one in the 1980's using a Farish 08 chassis with an extra driving wheel, I when through many photos trying to identify the sides, epic fail! Steve.

This video is good as well, check the front rear windows on the Fell they appear to be curved. https://www.youtube.com/watch?v=tCG7gRbT45w&feature=youtube_gdata_player Steve.

Type Idleford Town into "you tube" and there is a 7mm one running built from an A1 models etch. Steve.

Hi Jon, I am updating a couple of R127 cranes as well. are the conversion kits still available and at what price ? just out of interest do you produce any other kits/etches ? Steve.

Has anyone taken any photos, Steve.

Just found this topic, the RCD Van on Idleford Town (BNNRS) is modelled upon the 1960'S TV detector vans, and the aerials spin. I have also made one in 4mm scale too and that is motorised as well. photo shows the 7mm van on Idleford Steve.

Should have included these, Steve.

I have built an O Gauge version of the 4mm kit without instructions or whitemetal castings, are you stuck on any part of the construction, maybe I can help. Steve.

Hi, its a Pentel Hybrid Gel Marker 0.8mm Tip White Ref K118L-LW Steve.

Just to complete this tail, here are the finished wagons one in SR and a hypothetical BR liveried one with the gel pen used for the additional lettering, again many thanks. Steve.

Many thanks guys, at least it can now be coloured and lettered up. Regards, Steve.

Hi, I have an old track cleaner wagon by Wills its an old whitemetal kit which is built up, apparently it was based upon a real cleaner based at Folkestone harbour, does anyone have any details of the lettering this vehicle carried or photos, a long shot I know. Steve.

I am just trying to find out which component fails, if any one knows. Steve.

Has any one managed to repair the printed circuit board in one of these signals after a failure, I wondered what components were failing and could they be changed. Steve.

What happened to the Dapol class 92? Steve.

Is there a drawing for one of these anywhere. Steve.

The Metrovic and 30 ton flat are Parkwood, nice job of Sarah by the way, the coaches to run behind are the old Farish suburbans painted brown, They will also pass for T stock as well just modify the brake end to a driving cab, remove the side duckets and add driving cab door windows with handrails, on the end remove detail and add plastic card, when dry form a shallow three panel bow end, cut the three driving windows and add detail (depends on batch build). Front chassis, remove buffers and add centre coupler, also add pickup beams to motor coach bogies, motorise to choice. Steve S.

Parkwood have the LMS/GWR 350 shunter in their range. Steve.

No D4501 13001 does have both boxes next to the radiator on both master and slave. Steve.

Set up a specialist N Gauge only shop and only have the obvious ordinary RTR stock, no kits, bits, and spares that you would expect, Oh I think its already been done! sorry. Steve.