BrushType4

March 28

Yes they are! A very diligent forklift driver :)

In other news, working on a 4mm station build that requires a stone finish. We could laser cut this but it would require some clever painting to get an acceptable stone look finish. So we are trying out a paper overlay from our brick paper range.

Early thoughts are this may work. Will get the shell of the building finished and revisit the paper overlay finish and report back.

March 27

Pallet stack.

March 19

A paint tryout on the station build.

March 14

Drop me an email to Phil@intentio.co.uk

March 14

Huge station project we’ve on our work bench. The Bury St Edmunds modal railway club are building a model of their local station.

March 14

New 4mm low relief North light engine shed or factory sections. Super detail even at 4mm.

February 8

On 07/02/2024 at 07:35, sdh-stbriavels said:

Hi - could someone from BRM clarify if the intentio GWR signal box is OO or O please? It's described as OO in the magazine, but I can only see an O gauge one on the Intentio website (a query to Intentio has gone unanswered). Thanks

It’s 4mm. I’ve not seen your message. My email is phil@intentio.co.uk

February 3

7mm SR traders store

February 3

A GWR Platelayers hut based on the prototype at Didcot.

January 24

A bit more modern image stuff has surfaced from the commission archives that are now kits.

Fuel grids.

and various hard standing sections.

and depot steps.

January 23

We are over ten years old and we’ve only just noticed 🙄

So today we’ve been rummaging in our archives to see what we and KS Laser Designs have done over the years. It’s a lot with nearly a thousand laser files. We’ve been busy.

Some of these files are in various stages of completion. I’ll be going through these and seeing what is worth completing. I did find some fencing jobs that were basically complete so I’ve added the following 7mm kits to the range.

Arco style fence

Safety Barriers

Concrete fencing in both 3 and 6 boards per section.

January 22

5 hours ago, Jol Wilkinson said:

Looks very good. Any further thoughts on the LNWR Northlight engine shed we spoke about some time ago?

We’ve got that very close. Drop me a message and we a sort specifics.

We’ve just finished an in house build of the 7mm coal stage.

and to compare to its little 4mm brother

January 22

On 20/01/2024 at 21:44, BrushType4 said:

Website is fine but unfortunately the certification is expired and waiting to be renewed. The site is safe.

All fixed. Pm me if you can’t find what you are looking for.

January 20

55 minutes ago, MartinRS said:

A nice looking model and well constructed by B15nac. I like the weathering.

I take it from your comments that you have some connection with Iintentio. If so you might want to let their web-master know that Firefox is blocking the site with the message;

Warning: Potential Security Risk Ahead. Firefox detected an issue and did not continue to intentio(dot)shop. The web site is either misconfigured or your computer clock is set to the wrong time.

My system clock is fine so you might want to check your system clock least you loose-out on visitors.

Firefox offers this link on how to resolve the problem:

https://support.mozilla.org/en-US/kb/troubleshoot-time-errors-secure-websites?as=u&utm_source=inproduct

Website is fine but unfortunately the certification is expired and waiting to be renewed. The site is safe.

January 20

Very basic welfare facilities and office.

January 18

Finally our commission for a 4mm Coal Stage is done and we now have this available as a limited edition kit.

January 18

8 hours ago, railfan1825 said:

Can you say when the N gauge cassettes will be available?

Thanks, Graham

They are available now. Email me phil@intentio.co.uk as we are collating interest for the initial batch.

January 18

Do it ! You know you really want an intentio Shed!!

January 18

9 hours ago, jcm@gwr said:

Have you considered offering them in 7mm?

We have and we do.

https://www.intentio.shop/sleepers?product_id=280

January 17

Prototype of a new 7mm Southern/BR railways kit. Traders Store.

January 16

Not sure if this is the drawings we need?

http://calmview.wiltshire.gov.uk/CalmView/Record.aspx?src=CalmView.Catalog&id=2515%2f403%2f0180&pos=8

January 8

36 minutes ago, Accurascale Fran said:

Hi everyone,

This news is just terrible and we are still in shock since the email from Rich landed in our inbox earlier this afternoon. In our short time of trading with Hattons, and in my personal experience of being a customer for over 20 years, the staff from Hattons have been a delight to deal with from beginning to end and professional to a tee.

I have been in contact with a few I have been lucky to work closely with over the past couple of years; very capable, bright, hard-working and talented people to wish them the very best in their futures. They will for sure go onto new and bright things, but a lot of really good and talented people have lost their jobs today, and our heart goes out to them.

A real loss to our hobby and industry. It's scarcely believable. We wish the staff and management all the very best and thank them for their help in our early years in this industry.

Fran.

Absolutely.

When i received Richard’s email its was a shock. I echo your sentiments Fran and hope all impacted find alternative work very soon. It looks like they’ll have a few weeks running down the business in an orderly fashion.

January 8

I was informed earlier today. Sad news.

I hope all the staff and families impacted find alternate work very soon.

January 4

We’ve responded to requests to make our fiddle yard and storage cassettes available in N Gauge.

January 4

You’re painting that well. I’m glad our painting tips are helping you.

Profiles

Forums

Blogs

Gallery

Events

Exhibition Layout Details

Store

Posts posted by BrushType4