Jump to content
RMweb
USERS MAY EXPERIENCE PROBLEMS POSTING AND WITH OTHER SITE FUNCTIONS. WE ARE AWARE AND INVESTIGATING. THE APPEARANCE MAY MAY BE DIFFERENT TOO WHILST INVESTIGATIONS CONTINUE.

060

Members
  • Content Count

    19
  • Joined

  • Last visited

Everything posted by 060

  1. From the outset, this was designed to be a portable exhibition layout. The scenic section consists of 5 baseboards each 4ft long x 3ft wide. Each has a 4ft x 2ft plant tray bolted to them. A secondary plant tray 4ft x 1ft containing the conifers with a 14in high backboard rests on the baseboard. I have dismantled and reassembled the layout several times and the boards slide into a rack mounted in my van to transport it in the same way as I do Hambleden. Hopefully when exhibitions return you will get to see it, but probably not until next year. Here are a couple more photos from
  2. The key to the success or failure of this design concept is in the planting. Most alpines are sold for their flowers, but I was only really interested in the leaf size and overall height. I found there were a number that fitted the bill. The commonest and most prolific were the miniature Thymes, but my favourite alpine is Leptinella and I have several varieties. Others that fitted the bill were Pratia, Mentha, Isotama and of course the inevitable ‘mind your own business’ There are a few others plus a good smattering of various mosses. There are 3 or 4 types of miniature conifers for th
  3. Another couple of pictures, this time on track ballasting. As the area the model is set in is Welsh slate territory, I used slate for ballast. I made my own from a bag of slate chippings from the local garden centre. Pieces of slate were crushed with a club hammer and then sieved to remove the larger pieces. It took many days of slate bashing to provide the required quantity for the layout. On the sidings, the slate was mixed 50/50 with sieved compost, but on the running lines this was reduced to 25/75 This was all laid dry and brushed into place. It was then lightly sprayed with water befor
  4. OK Due to the design brief, no wood could be used in the baseboard construction. So like Hambleden, the starting point was polycarbonate roofing sheets to which was bolted 2in deep plastic plant trays. These were fitted with 2in expanded foam insulation sheets painted matt black. For exhibitions, the layout will rest on the beams and trestles used for Hambleden Test setup. The seed trays with the conifers were lated replaced with long plant trays. The backscene boards are plastic sofit boards. The track is Peco SM32
  5. After 5 years and 30+ exhibitions it was time to think about a replacement for my 'G' scale 45mm gauge Hambleden Valley layout. It had to be something different. The only criticism I heard was that it was too big to run indoors at home, but could not be left outside in the garden, so neither an indoor layout nor a garden railway. Hambleden was unique in using radio controlled live steam locos on an end to end layout involving lots of shunting of rolling stock. So this time it had to be a 'round and round'. However it also had to be different from the usual offering of unballasted track, a nod
  6. As I have gone 32mm now, I am converting all my locos from 45mm to 32mm with non-insulated wheels to allow for the slomo so I can now run my locos on your layout. I am writing an article on the new layout but not sure whether to post articles here or send to a magazine, - maybe a cut down version for here, but I still need to finish the layout. I could post some more photos. I have been designing a new signalling control unit for Fawley so have been a bit sidetracked. I don't think I'll build another layout, I still have quite a lot of 32mm rolling stock to build for this one. I have quite
  7. Hi Mike Pleased to see you doing more work on this, it looks very good and hope to see it in the flesh sometime. My new exhibition layout to replace Hambleden Valley has fared well over this wet winter and I hope to have it finished for later this year if and when exhibitions ever return. Have attached a couple of pictures taken in the summer
  8. Roundhouse Billy in headshunt at Pen-y-Bont, my new exhibition layout, waiting next turn of duty
  9. Mike, pleased to see you have picked this project up again. It's looking very good. I love the backscene, I think it makes such a difference, especially in photographs of the layout. This is large scale modelling in a small space done extremely well. I'm tempted to do something similar so that I can run my live steam engines indoors as Hambleden is too long to setup indoors. Keep up the good work. Steve
  10. Boiler certificates have become a problem so I have retired the layout whilst I ponder on what to do next, however it will be at G Rail in Nottingham on 19th May.
  11. Hi Richard I use a 2.4Ghz radio control system from Lococontrol.co.uk. Dave Pritchard the owner does a small amount of customisation of the transmitters for me, but his standard offering will work just as well. ( I don't use the extra function buttons and use a switch for direction servo rather than a pot. You can use the bind button which is on channel 5 to opearte a switch if required, my Anne has an electronic whistle on this channel) I like the system for its small size and the ability to bind receivers without needing to gain access to them to fit bind plugs which gives me great fl
  12. Please do put the doors on the right way round though, not as in the picture. The diagonal brace should always go from the top outer corner back to the hinge post. Just look at any real life engine shed. It's just amazing how many people get this wrong
  13. Here's the fifth and final loco in the Hambleden Fleet. Its an amalgamation of a lengthened and modified Roundhouse Katie body on a shortened Lady Anne chassis. Has new rear coal bunker, front running boards and other details, including a shortened chimney, a chuff pipe and a Slomo. See it in action on Hambleden on youtube at: or at BRM Alexandra Palace 24/25th March or 16mm show Peterborough 7th April 2018
  14. The run time is purely a function of how fast you burn through the contents of the gas tank. What the engine does or how much steam it uses has no bearing on the run time. You just need to get the burner as low as it will go wothout turning it out. If the burner is left wide open, the standard Roundhouse 32ml gas tank will empty in around 28mins. Given it takes 7-8 mins to raise steam to 40psi, that leaves a running time of around 20 mins. The lower you can set the burner, the more you will extend this time. 50mins is my best.
  15. Just found this thread. Runtimes vary between 25mins and 45 mins. As stated above, the trick is to get the gas turned down as low as possible without turning it out. On Roundhouse locos this has to be done by listening to the burner roar and at exhibitions, background noise can make this diificult to hear, However the gas control knobs are fitted with a pointer to give a visual indiction of the setting. As Mike said above, I now use a timer device and swap locos over after about 25mins to avoid them running out of steam on the layout, plus the audience doesn't want to see the same loco for
  16. search for hambleden valley railway on youtube. there are several videos of it in operation including at exhibitions
  17. It pays to look at the prototype. The diagonal brace on wooden doors and gates etc should always go from the top outer corner back to the hinge post. I see so many excellent models spoilt by people modelling the door with the diagonal going the opposite way. Incidently many DIY enthusiasts also make the same mistake, but if you look at any engine shed or garage doors etc, the diagonal will always go from top outer corner back to hinge post, never the other way round. A minor detail I know, but one I find personally irritating.
  18. Most layouts I see have coal staithes backing on to the siding as if coal was unloaded from the wagon directly into the staithes over the top of the back of it. I do not believe this was the case in the vast majority of coal yards. The staithes were always sited away from the siding and coal was shovelled/barrowed from the wagon to the staithe for storage, or coal merchants would fill sacks directly from the wagon, or the coal was just emptied on to the ground. I can't find any photographic evidence to support this. The only one example I have seen lately is the coal at corfe castle on the
  19. Try to use LED rather than filament lamps A typical LED with 1k resistor takes 12ma of current or 83 LEDs to 1 amp Hobbys (www.hobby.uk.com) produce a nice LED bulb for dolls houses that have an LES screw in fitting part no K53509 and produces enough light to light buildings etc Grain of wheat bulbs typically take 80ma or 9 lamps to 1 amp. 80 filament lamps requires 6.5 amps of current If you are using LED and filament on same circuit, you will need DC voltage and hence equally large rectifiers. You could run the filaments of AC but beware the voltage. DC is typically 3/4 the volt
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.