PatB

I am reminded of another Perth incident, when a kids' water playground (basically, lawn sprinklers with ideas above their station) was opened as part of a fancy waterside development in the city centre. Because it was the usual Perth half-arsed, cheapo bodge job, badly designed and constructed, and signed off in a hurry to meet the Minister's packed ribbon cutting schedule, it had numerous problems. Chief amongst these was that, after a week or two, the water was found to be harbouring assorted nasty microbes that thrive in a hot climate in damp conditions. Rather than admit they'd botched the whole thing, there were serious proposals from the powers that be that children entering the play area should be forced through a bleach shower so they wouldn't contaminated the water. I'm pretty sure the whole thing was quietly torn up after only a few months, and is never to be spoken of again.

And, on a related note https://www.abc.net.au/news/2024-04-22/bite-victims-warned-stop-bringing-snakes-to-emergency-department/103752506

Because Perth is conveniently situated within walking distance of the surface of the sun most of our buses are sealed, airconditioned boxes, largely to avoid the necessity of hosing out melted passengers at the end of every day in summer.

That'll cost a fortune in Peco track rubbers.

Looks suspiciously like Brian Monaghan getting a bit arty with a RotM c1980.

Back when JuniorB was in kindergarten, they had a school trip, which I can only admire for its genius and simplicity, consisting of herding all the kids onto a bus, taking them to the depot and through the bus wash, then back to school. Exciting (for 5 year olds), cheap, and the kids were kept contained at all times when off school premises.

Currently 22 quid. Doesn't actually seem too bad for a Dublo Deltic. It's not like the original Dublo paintjob was particularly complex to reproduce, so it could be a nice piece for someone not totally obsessed with originality.

I've always thought the Ratio loco kits were a laudable effort to offer a loco kit that was as "easy" to put together as a plastic rolling stock kit, for a relatively affordable price (metal kits being expensive). Unfortunately, in practice they seem to have showed why conventional loco kits were/are how they were/are.

I've used Molotow, and other "street art" paints on (legitimate) mural projects and been very impressed. They stick like crazy to pretty much anything, with no more preparation than a blast with a pressure washer, and seem to last very well. I recently drove past one of our projects that's now 8 years old, and it's still looking good. The colour choice is excellent, too, and includes shades that don't appear in more "conventional" ranges. Well worth a look.

Interesting. I admit that it's been some time since I bothered to look at Oz retail pricing, as it had always seemed to follow the usual Australian situation, for any goods out of the mainstream, of poor range and swingeing markups. Perhaps the distributors and retailers have caught up with the Internet era and are adjusting to the realisation that their markets are no longer captive, and it's better to have a small cut of something than a larger cut of nothing.

Although given typical Australian model railway pricing, and the cost of shipping back to the UK, someone is going to have to really want them.

Indeed, I have long suspected that there may be insufficient harvestable energy, and other necessary resources, to sustainably provide widespread powered personal transport at anything above the level of an ebike.

It's not a completely daft idea, and, given a degree of user discipline (so not in public service, then) isn't as uncivilised as you might think. Google "composting toilet" or "dessicating toilet". Such systems are becoming increasingly popular on boats, where discharge of waste is becoming similarly unacceptable, and where a traditional marine toilet dumping overboard also carries a significant risk of sinking your vessel if it goes wrong or is misused.

Well, in a way it is, at least anywhere with plentiful water. The basic chemistry of electrolysis is neither complex nor new. The tricks are obtaining the energy to split the water molecules, and then compression and storage of useful quantities without (a) blowing yourself up or (b) wasting most of it by leakage.

I gave up on the RAC here when I realised that their patrol guys knew less about my vehicles than I did and, yes, were likely to actively endanger expensive electronics. The towing service was handy a couple of times, but as my vehicles have become newer and more reliable, the necessity has dropped off. If I were to chuck the annual subs into a pot, I'd easily accumulate enough to cover a (massively overpriced) private tow on the rare occasions it might be needed.

As the designated shopper in the B household, I used to notice that every supermarket contained, at any one time, at least one old guy who shuffled around grumbling and swearing to himself. Then, for some time, I didn't seem to see such folk anything like as often. It puzzled me until, a year or so ago, I realised why.

Perfect for one of those CJ Freezer main line tailchasers with a 3 coach platform capacity and turntable(s) for Pacifics.

Probably knackered. Replacements are now so cheap that, if you (mentally) charge your time at any kind of reasonable rate it's probably not even worth taking it for repair, let alone opening it up for a look yourself. The thing with cordless drill-drivers is that, big ones particularly, produce so much glorious torque, that it's dead easy to overload them on a regular basis without them complaining. At least until something finally haemorrhages and all the magic smoke comes out.

Did it die of silicosis?

Ah, the hot car in the Australian sun. Back when I was a glorified sales rep, schlepping around the WA Goldfields, in summer I'd return to the trusty Commodore after a lengthy site visit and get in quite happily, because, in the 60-odd degree interior, all the zillion flies that were hanging around me would cook in their little exoskeletons and fall out of the air. Hah! This is why evolution gave me internal temperature regulation you little buzzers.

When I open the listing I get a brief flash of something that looks like a price list for the individual items, but it disappears as the page loads and I can't seem to get it back. My conclusion is that it's a legit(ish) listing but isn't working for some reason.

My guess would be the evening shift guy who, for reasons of his own, didn't want to go home immediately on knock off and, instead, preferred to sit watching the trains go by for a while, presumably without his supervisors' knowledge.

Interesting link. Whilst I think it's unlikely that "The Ancients" would have made and used ball bearings, I do consider it entirely plausible that, given a source of suitable material, large objects could have been moved on a thin bed of pea gravel (hence my comment on ancient undertanding of friction and lubrication) and/or finely ground mud.

Whilst it's not 1000T, this might be a good demonstration of moving heavy loads with limited gear. Maybe we just need to recognise that ancient peoples were very smart jackleg engineers, capable of doing quite remarkable things with the tools, materials and equipment at their disposal. And a good understanding of the basic machines (lever, inclined plane, wheel/roller), and the principles of friction and lubrication. And time, of course. If you've multiple generations to work in, you don't need to do a big lift in one go. If it takes you 10 years of jacking and packing, so what? Your successors will take it from where you left off.

True. Attention to overcurrent protection is important if using computer PSUs, but needn't be over-complex. 12V bulbs, polyswitches, fuses and mechanical circuit breakers (depending on preference) are all cheaply and easily available. However, in the context of the thread, I was more thinking of stuff like phone chargers, small printer and scanner supplies and the like. A quick rummage through the discarded tech drawer suggests that typical maximum outputs are between 0.5A and 1A at whatever voltage, so not too frightening, but ample for running most accessories. As they're essentially free, it's not a major problem if you need to plug 3-4 of them into a gang socket to run several individual items. In such a case their lowish outputs assist in avoiding high currents anywhere.