Jump to content
 

Paul C

Members
  • Posts

    35
  • Joined

  • Last visited

Recent Profile Visitors

330 profile views

Paul C's Achievements

49

Reputation

  1. @SteveCole I received a repeat of the email this afternoon, but it's exactly the same as the original one!
  2. I've got the same problem Tim - only the watching trains at Tytton Hall Yard is linked to in the email. A shame because the "watching trains" videos are my least favourite and the other two with Phil and Tony sound really interesting!
  3. I'm yet another one doing a Middy... Been on pause for a bit, but I did build up a recreation of the small station building (as yet interior-less and unpainted), like the one at Brockford, plus the goods shed to go with it (exterior sides cut out, but not assembled). The Middy has a massive advantage of short (100ft) platforms at the small stations, making a full size model possible without loads of space. I already have a Hornby J15, and planning to get a couple of the Hornby generic 6 wheelers in BR livery which are a somewhat closer match to the real thing than the Hattons ones. I think if I'm brave enough it's actually possible to get a very close match to the Middy's 1st/3rd composites by chopping up the bodies of a Hornby 1st and 3rd class. Anyway, look forward to seeing some photos of yours, and as and when I get going with mine again I'll start my own thread!
  4. I was in "the other queue" because there was a single member of staff outside: I and several others asked when we arrived up the steps if this was the prepaid queue, and we were told that it was. Only later they changed their minds when more staff came out! It was totally disorganised. Why were people with prepaid tickets having to queue with people without? Anyhow, don't want to gripe too much as it was a strong selection of layouts this year, though shocked that Hornby weren't there - I'd been hoping to get a look at the TT120 stuff.
  5. Not built any Kingsway kits myself, however I feel I ought to do the Romford Fire Station kit one day as my grandfather worked in the Essex County Architects' office, designing Fire Stations, and we think this may be one of his.
  6. I'm partway through a build on a 400x800mm baseboard with LY01 at one end. The modular design of the buildings (intended so you can pack them in the boxfile) also really lends itself to customisation. Here's a shot where I was posing track and loco to see how things might work, plus an overhead (please excuse my toes!). In the second picture, the building on the right is the free low relief warehouse kit. The two buildings on the left are scratchbuilds, just used to experiment with a street scene outside the works. Enjoy making yours!
  7. Some thoughts on this, in light of some of the posts above. My wife was a steward at the Festival of Quilts (FoQ) at the NEC a week and a bit ago, and even managed to rope me in to a bit of stewarding last Sunday. The festival is run and promoted by an events company, in association with the UK Quilters Guild, and was their first since the first lockdown last year, so a slightly different arrangement than Warley MRC which I understand organises the entire show. I felt that the NEC had taken all reasonable precautions against Covid: on entry, you had to present either evidence of double vaccination or a negative lateral flow test, mask wearing was mandatory apart from those with exemptions, tickets were for timed entry to avoid queuing/crowding and the organisers had booked an extra hall to allow exhibits and stands to be more spaced out. It felt safe to me, as someone who is clinically vulnerable and had to self isolate for three months last year. On the flip side, and pertinent to Warley, was that the organisers had accepted that they would make a loss this year, but being a commercial organisation not running shows isn't really an option. This is of course very different for a club, run by volunteers. Many of the medium-sized traders had decided not to attend FoQ due to the risk of staff having to isolate, and the crippling effect this could have on their businesses post-event. That said, the larger and smaller traders were still there. I would suspect that the likes of Hattons and Rails are small enough to be concerned about the potential impact of staff attending the show being taken out of action. We all know that the traders are critical to the financial viability of model railway shows. We should also consider that FoQ was run in the "summer", a rather different proposition than a winter exhibition where the prevalence of Covid may be higher. On balance, I think Warley MRC has made the right decision for this year, but equally I think we can feel more optimistic that these large events will be viable again going into next year, especially with the experience of other large indoor events that will still run this autumn and winter to draw on.
  8. No time machine? I'm sure there must be a kit somewhere on the Internet... Serious question time - is this a toe in the water to see if there's a market for a regular publication? It looks really good, and I shall be heading over to Pocketmags to grab a virtual copy.
  9. It looks great...but I still haven't received my postal copy of the Spring edition, and no response from the Warners subscriptions team despite two emails over the last two weeks. Other post has been turning up during this time. I wouldn't normally post this sort of thing on here, but at least I know that it'll get read by someone who works for the magazine!
  10. I fear EM would be a bridge too far right now... Just something that runs would be good! Never say never though, the improved look of the track is certainly worth the effort.
  11. I only just saw your reply! As is typical for me, modelling progress has been in fits and bursts. I'm currently working on a little industrial layout, using some of the buildings from the original Scalescenes boxfile kit. At some point, I'll get around to posting some proper photos. I also have a little piece of Middy on the go - based on the buildings at Brockford Station, but imagining that the railway got built beyond Debenham so I can be a bit more creative with the track plan. Next up after that is White Swan...I still haven't quite resolved how to get the iconic shot from the diorama into a full layout, as the operationally interesting bit is of course the yard, behind the buildings. Since making the diorama, I've found loads more photos, so have a much better idea of what the yard itself looked like. I also have one of the rather excellent Rapido tram locos though, so I've no excuse really...
  12. Having acquired a tablet recently, is there an easy way for me to convert my print subscription to digital? I've downloaded the free trial edition from PocketMags and am suitably impressed!
  13. I've had good success painting with a thinnish (double cream consistency) mix of powdered wall filler straight onto the card, followed by painting with acrylics once dry. To avoid warping, I put it under something heavy whilst still damp (but not wet).
  14. I've used it on a couple of walls on the original Scalescenes box file kit instead of layering 2mm card and it seems to be fine. I used my usual combination of Pritt Stick for the large areas of cover layer, and PVA for any wrapping over, then PVA to join the structure together. PVA should work fine for sticking stuff to the foam.
  15. Thanks for posting this. I have made a start on my own over the last few days, and your photos have encouraged me that the bashing I was intending to do (omitting the hopper, turning the enclosed conveyor into a smaller pipe conduit) will be feasible. I'm not intending to use a box file, but to include this at one end of a micro. Not quite worked out the other end yet, but it will include an (already built) Scalescenes terrace as a view blocker. Yours looks great!
×
×
  • Create New...