Jump to content
 

TotalLamer

Members
  • Posts

    104
  • Joined

  • Last visited

Profile Information

  • Location
    Richmond, VA

TotalLamer's Achievements

50

Reputation

  1. I'd never even heard of these locomotives until I saw a pair of them at a customer's facility. With most "new" switching/yard units these days being remanufactured on old frames, it's crazy to see a​ brand new, 2-axle, AC traction switcher. Especially with how rare 2-axle units are in the US in general! Don't think there's a model of them though. www.republiclocomotive.com/rx500-industrial-locomotives.html
  2. It's basically for when you're going to be out at night but don't necessarily need an EoT, just a blinky light will do. It's probably not on the rear at the moment because it's daylight, so a red flag is enough.
  3. In normal operations, such hand-throw switches aren't really unprotected as leaving one open would result in either a track light or the dispatcher being able to specifically see that the switch is open, I'm not 100% sure which one it is (as I'm not a dispatcher). But either way, the main is protected because the result would be no one else being lined along that route. It's just such a crazy thing, the likelihood of forgetting to line the switch back occurring during a short (usually 12-16 hours I think) signal suspension.
  4. It's not that it's not double-ended, it's that it's not a siding. It's a storage track. A siding would have interlockings at either end besides being just classified as a different kind of track. This particular track is called the Silica Storage Track. Here's a snippet from the timetable for this location:
  5. The way things are looking now is that the CSX train that was hit had shoved back into a storage track (not a signaled siding, just a storage track accessed by a hand-throw switch off the main) on the other side of the mainline from an automobile unloading ramp facility. It was during a signal suspension so track warrants were required. So the CSX train shoves in the clear, thinks he lines the switch back but doesn't. Calls the dispatcher, gives back his track and the switch. Dispatcher gives track to Amtrak. Wreck ensues. This is signaled territory which would normally have alerted the dispatcher to the open switch and would have prevented him from setting a conflicting movement, however a signal suspension was in effect to cut in new PTC signals. This is NOT a final story, this is ONLY an educated guess based on information both public and heard through the grapevine. Again, an educated guess ONLY.
  6. The really interesting (not interesting as in good, just interesting as in a rarity) is that it seems like the accident occurred within the limits of a signal suspension. Not good.
  7. Everything that you see that seems to scream "chemical plant" there is Honeywell... well it was until earlier this year, now it's Advansix. Anyways, they have their own switch crews that use these tiny little 2-axle (yes, 2-axle) modern switch engines... they're alternating current even! I think they have 2 of them. This is the only image I could find of one: Sorry for the small size! Anywho, Advansix switches their own plant, CSX and NS simply deliver (and pull) long cuts of cars. Anyways, the paper plant in the back is WestRock, after RockTenn merged with MeadWestvaco recently. Until -very- recently, CSX switched the facility on 1st shift and NS on either 2nd or 3rd, not sure. However as of a few weeks back NS now switches them 1st and 2nd(or 3rd?) shift. Those are the two BIG industries in the area. There's a lot of smaller ones... Commonwealth Industrial Services (NS and CSX), Evonik Industries (CSX only), Praxair (CSX and NS can both get to it but I think only CSX switches it now), Airgas (CSX and NS)... I'm sure there's some NS only ones too but I don't know their names.
  8. I didn't watch most of the video but are you referring to the couplers coming together and closing but then coming apart when you try to pull away? What happens is that the "pin" hasn't dropped in one of the knuckles. This usually happens from either very gentle or very hard couplings. I don't know about shortlines but this is why a lot of Class 1s have a rule about having to "stretch out" a coupling after you've made it to ensure it's good.
  9. Oh yeah, it can be a huge pain in the rear to couple in a curve, especially coupling a long-drawhead car to another long-drawhead car.
  10. Another point, as far as I can tell there's no rhyme or reason to why some places might use a derail and some might use a split rail. Derails are surely cheaper and are probably less effective, so maybe it's a cost thing. Also derails are much easier to add onto an existing track. So to illustrate this, here's a couple of industries directly across from each other. ABC Builder's Supply (receives centerbeams of drywall) and Lehigh Cement (receives... cement). ABC has a derail and Lehigh has a split rail. Why? The world may never know. The big picture: ABC: Lehigh:
  11. An old post I know but I'd like to add that I've never heard of these being called derails. The image AnEntropyBubble posted is of a derail. What's posted here is called a split rail. As for where you'll find these, the answer is essentially any spur tying into the mainline. Industry tracks, storage tracks, small setoff tracks... even small yards will have a derail or split rail protecting the main. Basically if you're looking at a track that's accessed from a hand-throw switch off the mainline, that track will have a derail or a split rail. It doesn't even have to be a mainline. Say you've got an industrial park with some number of industries, each with their own spur accessed off a common track. Each spur will generally have a derail or split rail near the clearance point. In this case it does often depend on the terrain though. If the spur goes downhill from the common track, oftentimes there won't be a derail/split rail. Uphill though, likely yes.
  12. Yeah it's an ethanol plant that was built around 2010. Unfortunately the company went out of business sometime shortly thereafter and it never went into operation. Recently the Hopewell city council voted on incentives to bring in another company to take the plant over and it seems to be running now. NS is the only one that works it though so I've never been in there.
  13. A swing bridge that still has a bridge-tender, no less! Its' normal position is open for river traffic, only lining for the railroad when necessary. You'll hear trains talking to him on the radio from time to time.
  14. It's so they can be serviced by both NS and CSX. Rates are much cheaper when you've got access to more than one railroad. The line passing closest to the industry is CSX's industrial lead, while everything further away is part of NS's yard,
  15. Not sure. Maybe nothing specific anymore. Hopewell has been a center of industrial activity since DuPont pretty much created it around the turn of the last century.
×
×
  • Create New...